D-Link DUB-104 Manuel utilisateur

Before You Begin

You must have at least the following:

•Pentium 233-MHz or faster or equivalent with 32MB RAM

•Available USB 1.1 Port For USB 1.1 Operation

•Available USB 2.0 Port For USB 2.0 Operation

•Windows XP, 2000, Mac OS 8, 9, or 10/X for USB 1.1 Operation

•Windows XP, 2000 or Mac OS X for USB 2.0 Operation

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice.

DUB-104 4-Port USB 2.0 Pocket Hub

This product can be used with

the following operating systems:

Windows XP, Windows 2000, Mac

OS 8, 9, and 10.1 or above.

DUB-104

4-Port USB 2.0 Pocket Hub

Power Adapter (5V 2.5A) Using a power supply

with a different voltage rating

will damage and void the

warranty for this product.

Installing the DUB-104

A. Plug the AC adapter into the

DUB-104 and into a power

socket in a power-strip or a

wall jack. (optional)

C. Your computer will automatically

detect and install the DUB-104.

You may now connect USB 2.0

or USB 1.1 devices to an

available USB port on the front of

the DUB-104.

B. Plug the USB type A dongle

(found on the bottom of the

DUB-104) into an available

USB 2.0 port on your computer

(or a USB 1.1 port if you don’t

have USB 2.0).

LED indicator

• The Power LED indicator is blue and lights up when the DUB-H4 is powered on by

using the external power adapter or by running on power supplied from the

computer (bus powered).

• If a port becomes overloaded, a “current exceeded” event will take place. The LED

will go off and the message “USB HUB Current Limit Exceeded” appears on the

monitor. Reset the DUB-104 by disconnecting the power adapter (if used) or

disconnecting the dongle from the PC for 5 seconds and then powering it back on

by connecting the AC power adapter or reconnecting the dongle to the PC.

Tips

• When connecting USB cables between USB devices and the DUB-104, make sure

that the cables are connected securely.

• Remember that when connecting USB 1.1 devices to a USB 2.0 hub or host

adapter, the USB 1.1 device will not work at USB 2.0 speeds.

• The DUB-104 does not have an on/off switch. It is always on once the external

power adapter has been plugged into a power source or the dongle has been

connected to a PC’s USB port.

• Connecting USB 1.1 devices to the DUB-104 may cause all USB devices

connected to the hub to work at USB 1.1 speed. To ensure 480Mbps throughput for

your USB 2.0 devices, don’t connect USB 1.1 and USB 2.0 devices to the hub at

the same time.

• D-Link recommends that while using a USB device that includes an AC power

adapter, that you use the power adapter to ensure proper power and current supply

to that device.

• Please remember to unplug devices properly to ensure that no data loss or

corruption takes place with your operating system.

Power LED:

Blue = Power is On

Off= Power is Off

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link xStack DGS-3324SRi Manuel utilisateur

D-Link

D-Link DIR 601 - Dlink Wireless N 150 Home Router Manuel utilisateur

D-Link

D-Link DGS-1250 Series Manuel

D-Link

D-Link DGS-1016D - Switch Manuel utilisateur

D-Link

D-Link Nuclias DNH-100 Manuel utilisateur

D-Link

D-Link DGS-3630-28TC Manuel utilisateur

D-Link

D-Link DES-1016D - Switch Manuel utilisateur

D-Link

D-Link DGS-1005G Manuel utilisateur

D-Link

D-Link DES-1008E Manuel utilisateur

D-Link

D-Link DXS-3410 Series Manuel

D-Link

D-Link DGS-1005G Manuel utilisateur

D-Link

D-Link xStack DGS-3620-52P Manuel utilisateur

D-Link

D-Link DUB-H7 - Hub - USB Manuel utilisateur

D-Link

D-Link DXS-3600 Series Manuel utilisateur

D-Link

D-Link xStack DGS-3324SRi Manuel utilisateur

D-Link

D-Link DGS-1008P Manuel utilisateur

D-Link

D-Link Single port Kvm Switch over ip KVM-410 Manuel utilisateur

D-Link

D-Link DES-1005D Manuel utilisateur

D-Link

D-Link DGS-1210-26/FL Manuel utilisateur

D-Link

D-Link DXS-1210 Series Manuel utilisateur

D-Link

D-Link DES-3010PA - Switch Manuel utilisateur

D-Link

D-Link DCH-G020X Manuel utilisateur

D-Link

D-Link DES-3326SRM Manuel utilisateur

D-Link

D-Link DCH-G601 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur