D-Link DP-311P - Air Print Server Manuel utilisateur

DP-311P

D-Link Wireless Print

Server

If any of the above items are missing, please contact your reseller.

Before You Begin

Check Your Package Contents

These are the items included with your DP-311P purchase:

You will need an 802.11b wirelessly enabled laptop or desktop computer and a

parallel-port printer that will connect to the DP-311P.

Important: TURN OFF the power to the printer before installing

the DP-311P.

Using a power

supply with a

different voltage

rating will damage

this product and void

its warranty.

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6.x, Netscape

Navigator 7.x.

DP-311P Wireless Print Server

CD-ROM (containing Manual and Warranty)

5V DC 2.0A Power Adapter

subject to change without notice. DP-311P .07032003

Antenna: - Used to

wirelessly connect to

802.11b compatible

devices.

Receptor for

Power Adapter.

POWER LED – a solid

light indicates a proper

connection to the power

supply.

Operation Mode Switch

This switch is used to put the DP-311P into configuration mode or normal mode.

WLAN LED – This LED blinks

during wireless data transmission.

Parallel Port - Used to

connect to the parallel

port on your printer.

Product Overview

Note: Do not connect the power cord to the DP-311P until

you are advised to do so.

Attach the included antenna to the rear of the DP-311P.

Make sure that the Printer is turned OFF.

Connect the DP-311P to the parallel port of the printer.

Plug one end of the power adapter into the DP-311P (in the DC Power

Input port, shown in the illustration above) and the other end into your

electrical outlet. The DP-311P LED’s will light up to indicate that the

power is connected properly.

Turn ON the printer.

Preparing your DP-311P for network

printing in Windows XP

Move switch to ‘Config’

position.

Use an 802.11b wireless client card to connect to the DP-311P wirelessly

using the following settings:

SSID: WLAN-PS

Wireless Mode: Ad-Hoc

Channel: 1

WEP: Disable

Preparing your DP-311P for network

printing in Windows XP (cont.)

For example, with D-Link’s DWL-650+ AirPlus utility, you should see an Available Ad-Hoc

Network by the name of WLAN-PS. Highlight this Network and connect to it.

Preparing your DP-311P for network

printing in Windows XP (cont.)

IP address: 192.168.0.52

Subnet mask: 255.255.255.0

Click OK

Select Use the following IP address

Go to Start > right click on

My Network Places >

select Properties > Double-click on

the Network Connection associated

with the Wireless Network Card.

Click Internet Protocol (TCP/IP)

Click Properties

In order to configure the DP-311P, your computer

must be in the same IP range as the Wireless Print

Server. The following steps will walk you through

setting a static IP Address in the same range as the

DP-311P.

Preparing your DP-311P for network

printing in Windows XP (cont.)

http://192.168.0.10

Open your Web

browser and type

“http://192.168.0.10”

into the URL address

box. Then press the

Enter or Return key.

Follow the steps below to associate the print server to your wireless AP or router.

The SSID of your wireless AP or router should appear in the list as shown below.

Select SSID

Apply Changes

The factory default IP address of the DP-311P is 192.168.0.10. In order to print

to the your printer through the DP-311P, the DP-311P must have the same IP

network settings as your network. By factory default, the DP-311P is configured to

connect to “ANY” wireless access point.

Click on Configuration > Wireless.

Preparing your DP-311P for network

printing in Windows XP (cont.)

Click on Configuration > Network.

Configure your IP Address

here to conform to your

wireless network. It is

recommended that you use

a Static IP Address. By

default, the IP Address of

the DP-311P is

192.168.0.10

Apply Changes

- Move the switch on the back of the DP-311P to “Normal”

mode.

- Remove and re-insert the print servers power plug.

- Associate your wireless laptop or desktop computer with

the same wireless AP or router as your print server.

Setting up your DP-311P for network

printing in Windows XP

For Windows XP:

Go to Start > Printers and Faxes > Add a Printer

For additional Windows operating system setup or information

on the web-management interface, refer to the manual located

on the CD-ROM.

Click Next

Double-click on the

“Add Printer” icon

Setting up your DP-311P for network

printing in Windows XP (continued)

Select “Local Printer.”

Select “Create a new port.”

At the pull-down menu, highlight

“Standard TCP/IP Port.”

Click Next

Setting up your DP-311P for network

printing in Windows XP (continued)

Type in the IP address of the print

server. (i.e. 192.168.0.10)

The port name will automatically be

filled in.

Select “Custom.”

Then click “Settings.”

Click Next

Click Settings

Click OK

Enter “lp1” for the

Queue Name.

Select “LPR”

Autres manuels pour DP-311P - Air Print Server

Table des matières

Autres manuels D-Link Serveur d'impression

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Manuel utilisateur

D-Link

D-Link DI-713P Manuel utilisateur

D-Link

D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Manuel utilisateur

D-Link

D-Link DP-300U Manuel de l'opérateur

D-Link

D-Link DP-300 Mode d’emploi

D-Link

D-Link AirPlus G DP-G301 Manuel utilisateur

D-Link

D-Link DP-301P Instructions d'installation

D-Link

D-Link DP-300U Manuel utilisateur

D-Link

D-Link DP 301U Manuel utilisateur

D-Link

D-Link AirPlus DP-G310 Manuel utilisateur

D-Link

D-Link DP-101 Instructions d'installation

D-Link

D-Link 301P - DP Print Server Manuel utilisateur

D-Link

D-Link DP 301U Manuel de l'opérateur

D-Link

D-Link DP 301U Manuel utilisateur

D-Link

D-Link DP-101P+ Manuel utilisateur

D-Link

D-Link DPR-160 Manuel utilisateur

D-Link

D-Link DP-311U Manuel utilisateur

D-Link

D-Link DP 301U Manuel utilisateur

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Manuel utilisateur

D-Link

D-Link AirPlus DP-G321 Manuel utilisateur

D-Link

D-Link Epress EtherNetwork DP-301P+ Manuel utilisateur

D-Link

D-Link AirPlus DP-G310 Manuel utilisateur

D-Link

D-Link DP-300U Manuel utilisateur

D-Link

D-Link AirPlus G DP-G301 Manuel utilisateur

Manuels Serveur d'impression populaires d'autres marques

Digitus

Digitus DN-13003-1 Manuel utilisateur

Edimax

Edimax PS-1206PWg Manuel utilisateur

Intellinet

Intellinet 509077 Manuel utilisateur

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manuel utilisateur

Buffalo

Buffalo LPV4-U2-300S Manuel utilisateur

Zonet

Zonet ZPS1000 Manuel utilisateur

TRENDnet

TRENDnet TEW-P11G Manuel utilisateur

Axis

Axis 140 BJC Manuel utilisateur

HP Jetdirect 280m - 802.11b Wireless Print... Manuel utilisateur

MicroNet

MicroNet SP766W Manuel utilisateur

NETGEAR

NETGEAR PS104 - Hub - EN Manuel utilisateur

Axis

Axis AXIS 1610 Manuel utilisateur

Buffalo

Buffalo LPV4-U2-300S Manuel utilisateur

Axis

Axis 5600+ Manuel utilisateur

LevelOne

LevelOne WPS-9123 Manuel utilisateur

NETGEAR

NETGEAR PS105 Manuel utilisateur

Xerox

Xerox FreeFlow Print Server V9 SP3 Manuel utilisateur

SEH

SEH primos Manuel utilisateur