D-Link DP-101P+ Manuel utilisateur
DP-101P+
D-Link Ethernet Pocket
Size Print Server
If any of the above items are missing, please contact your reseller.
Before You Begin
Check Your Package Contents
These are the items included with your DP-101P+ purchase:
You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a parallel-port printer that will connect to the DP-101P+.
Important: TURN OFF the power to the printer before installing
the DP-101P+.
DP-101P+ Pocket Size Print Server
CD-ROM (containing Manual and Warranty)
7.5V DC 1A Power Adapter
Using a power
supply with a
different voltage
rating will damage
this product and void
its warranty.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications
subject to change without notice. DP-101P+ .08142002
This product can be set up using
any current web browser, i.e.,
Internet Explorer 5x, Netscape
Navigator 4x.
Connecting The DP-101P+ To Your
Network
First, insert one end of a CAT5 Ethernet RJ-45 cable into
the “Network Port” (shown below.) Connect the other
end of the cable to the LAN port of the gateway or switch.
Note: Do not connect the power cord to the DP-101P+ until
you are advised to do so
Next, make sure that the Printer is turned OFF.
Connect the DP-101P+ to the parallel port of the printer.
Using the printer cable, connect one end of the cable to the
printer port of the DP-101P+ (shown below) and the other
end to the parallel port of the printer.
Turn ON the printer.
Then, plug one end of the power adapter into the DP-101P+
(in the DC Power Input port, shown in the illustration on the
previous page) and the other end into your electric outlet.
The DP-101P+ will turn on and begin a self-test.
Setting up your DP-101P+ for network
printing in Windows XP
The factory default IP address of the DP-101P+ is
192.168.0.10. In order to print to the your printer through
the DP-101P+, the DP-101P+ must have the same IP
network settings as your network. If you would like to
change the IP address of the DP-101P+ to conform to your
network, please refer to the Manual for instructions to do so.
For Windows XP:
Go to Start>Printers and
Faxes>Add a Printer
For additional Windows operating system setup or information
on the web-management interface, refer to the manual located
on the CD-ROM.
Click Next
Double-click on the
“Add Printer” icon
Setting up your DP-101P+ for network
printing in Windows XP (continued)
Select “Local Printer.”
Select “Create a new port.”
At the pull-down menu, highlight
“Standard TCP/IP Port.”
Click Next
Click Next
Click Next
Setting up your DP-101P+ for network
printing in Windows XP (continued)
Type in the IP address of the print
server. (i.e. 192.168.0.10)
The port name will automatically be
filled in.
Select “Standard.”
Make sure that “Generic Network
Card” is highlighted.
Click Next
Click Next
Click Finish
Setting up your DP-101P+ for network
printing in Windows XP (continued)
Select “Yes” to print a test
page
In this window, scroll down to
find your printer. (If it is not
listed, insert the driver CD or
diskette that came with your
printer.)
Click on “Have Disk.”
Then, scroll down and highlight
the printer.
At this screen, you can input a
name for this printer.
Click Next
Click Next
Click Next
Your Setup is Complete!
The printer is now ready for printing
with Windows XP, on your network.
Click Finish
Note: MacOS printing is supported for Postscript
printers only.
Technical Support
You can find the most recent software and user
documentation on the D-Link website.
D-Link provides free technical support for customers
within the United States for the duration of the
warranty period on this product.
U.S. customers can contact D-Link technical support
through our web site or by phone.
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
email: support@dlink.com
Autres manuels pour DP-101P+
1
Table des matières
Autres manuels D-Link Serveur d'impression
D-Link
D-Link AirPlus G DP-G310 Manuel utilisateur
D-Link
D-Link DP-300U Manuel de l'opérateur
D-Link
D-Link DP 301U Manuel utilisateur
D-Link
D-Link DP 301U Manuel utilisateur
D-Link
D-Link DP-101 Instructions d'installation
D-Link
D-Link DPR-2000 Manuel utilisateur
D-Link
D-Link AirPlus G DP-G321 Manuel utilisateur
D-Link
D-Link DP-300 Mode d’emploi
D-Link
D-Link DP-300U Manuel utilisateur
D-Link
D-Link DP-300+ Manuel utilisateur
D-Link
D-Link DP-313 - Air 802.11b Wireless Print Server Manuel utilisateur
D-Link
D-Link AirPlus DP-G321 Manuel utilisateur
D-Link
D-Link DPR-2000 Manuel utilisateur
D-Link
D-Link DP-G301 - Print Server - Parallel Manuel utilisateur
D-Link
D-Link DP-300 Manuel d'installation
D-Link
D-Link DP-311U Manuel utilisateur
D-Link
D-Link DPR-1040 Manuel utilisateur
D-Link
D-Link DPR-1061 Manuel utilisateur
D-Link
D-Link DPR-1040 Manuel utilisateur
D-Link
D-Link 301P - DP Print Server Manuel utilisateur
