D-Link DE-220PCT - Ethernet 10 Mbps ISA Nic Combo Manuel utilisateur

Introduction

The D-Link DE-220P Series is a new line of Plug and

Play Ethernet adapters based on the technology of D-

Link’s best-selling DE-220 Ethernet adapters. Plug

and Play(PnP) technology provides automatic con-

figuration of newly installed devices without user

intervention, eliminating much guess-work from in-

stallation of PC upgrades.

Ease of use is the hallmark of the DE-220P Series.

After installing a DE-220P Series card, configuration

is exceedingly simple for both traditional (non-PnP)

systems and the newer PnP-compliant systems.

For PnP systems, simply install the DE-220P Series

card into an expansion slot. Configuration by the sys-

tem software then proceeds automatically. If multiple

network interface cards are installed, the PnP system

guarantees that there are no conflicts among them.

For non-PnP systems, just install the DE-220P Series

adapter into an available expansion slot, then run the

supplied setup program, setup.exe. Online help an-

swers your questions , and an advanced diagnostic

DE-220P Series Ethernet Adapter / User’s Guide

2Introduction

program is supplied for testing adapter functions and

communication with other computers on the network.

Features

DE-220P Series Ethernet adapters comply with IEEE

802.3 Ethernet standards, and use VLSI components

for enhanced reliability. The following features dis-

tinguish D-Link DE-220P Series Ethernet adapters:

♦Easy Installation

DE-220P Series Ethernet adapters have no

physical jumpers or DIP switches. Thus it is

never necessary to remove a DE-220P Series card

in order to reconfigure. When installed in a PnP-

compliant system, configuration is handled

entirely by system software, with no user

intervention. In non-PnP systems, configuration

is accomplished by running the supplied setup

program.

♦Support for 16-bit Expansion Slots

DE-220P Series Ethernet cards can be installed in

16-bit (AT-style) expansion slots.

DE-220P Series Ethernet Adapter / User’s Guide

Introduction 3

♦DE-2000 Drivers

DE-220P Series Ethernet adapters are fully

compatible with network drivers for Novell NE-

2000 adapters.

♦Diagnostic Program

A supplied diagnostic program tests all functions

of the DE-220P Series adapter and verifies its

communication with another computer on your

network.

♦LEDs

Two LEDs provide network state information:

1. PWR/Tx Indicator

Steady green (Power indicator) shows that the

adapter has power (computer power is ON and

power is supplied to the adapter).

Flashing green (Transmission indicator) shows

that the computer is transmitting onto the net-

work. This function applies only when the

network medium is twisted-pair cable.1

1See Footnote 5, Page 2-12.

DE-220P Series Ethernet Adapter / User’s Guide

4Introduction

2. LNK/Rx Indicator

Steady green (Linkage indicator) shows that there

is a good data linkage to the network.

Flashing green (Reception indicator) shows that

the computer is receiving from the network. This

function applies only when the network medium is

twisted-pair cable.2

♦

Remote boot option

A Remote Boot ROM is available per optional or-

der. The Remote Boot ROM easily snaps into a

mount on the DE-220P Series card to provide for

remote booting of computers which do not store a

boot program.

♦Runs a wide variety of networking software

DE-220P Series Ethernet adapters can be used with

these networking systems:

D-Link LANsmart D-Link TCP/IP for DOS

NDIS driver Novell NetWare 3.x and

4.x ODI driver

MS LAN Manager Windows for Workgroups

2See Footnote 5, Page 2-12.

DE-220P Series Ethernet Adapter / User’s Guide

Introduction 5

Windows 95 Windows NT & Windows

NT Advanced Server

SUN PC-NFS DEC Pathworks

Banyan VINES IBM LAN Server & PC

LAN Support Program

Packet Driver 3Com 3+Open & 3Com

3+Share

FTP PC/TCP WIN/TCP Pathway Ac-

cess for DOS

SCO UNIX AT&T UNIX

UNIXware Solaris UNIX

Overview of PnP

Plug and Play technology (PnP) is defined by Plug and

Play ISA Specification v.1.0a. A fully functional PnP

system includes a PnP-compliant operating system,

a PnP system BIOS, and PnP-compliant interface cards.

Windows 95 is the first popular PnP-compliant operat-

ing system. Computer mainboards with PnP BIOS’s

are just reaching the market.

In the interim, PnP technology still provides substan-

tial benefits. For example, after installing a non-PnP-

compliant Ethernet adapter card (a traditional, non-

PnP-compliant card may be called a legacy card) into

DE-220P Series Ethernet Adapter / User’s Guide

6Introduction

an expansion slot of a PnP-compliant mainboard, the

user can run the ISA Configuration Utility (ICU) to

configure the adapter.

DE-220P Series Ethernet Adapter / User’s Guide

Installation 7

Installation

CAUTION:Under ordinary circumstances, a DE-220P Series

card will not be affected by static charge as may be

received through your body during handling of the

unit. In special circumstances where you may carry

an extraordinarily high static charge, it is good

practice to reduce the charge by touching a ground

before handling the adapter.

Installation of a DE-220P Series Ethernet adapter re-

quires these three steps:

♦Insert the adapter into an available expansion slot.

♦Connect network cable to the adapter.

♦For non-PnP systems, configure the adapter by

running the supplied setup program, setup . exe.

(For PnP-compliant systems, this step is fully

automated and requires no action . )

This chapter provides detailed procedures for these

three steps. When these steps are completed , you may

run the diagnostic routines of Setup.exe program to

test the configuration.

DE-220P Series Ethernet Adapter / User’s Guide

8Installation

Single-Adapter installation

Shut down the computer, unplug its power cord,

and remove the chassis cover.

Insert the DE-220P Series card into the connector

of any open ISA expansion slot. Ascertain that

the card is fully seated in the expansion slot

connector.

Install the bracket screw which secures the card to

the computer chassis.

Replace the computer’s chassis cover.

5. For non-PnP systems, configure the DE-220P

Series adapter by running the supplied setup

program, setup.exe. (For PnP-compliant sys-

tems, this step is fully automated and requires no

action.)

DE-220P Series Ethernet Adapter / User’s Guide

Installation 9

Multiple-Adapter Installation

Multiple DE-220P Series cards may be installed in

a computer to provide for multiple addresses, or in

the case of a server, to provide for network seg-

mentation.

Multiple Cards in a PnP System

No special attention is needed when installing

multiple DE-220P Series cards in a PnP-compliant

system (so long as Plug and Play is enabled3). In-

stall the several cards into their expansion slots,

following the four steps set out in the “Single-

Adapter Installation” section above (repeating steps

2 and 3 for each card). When computer power is

switched on, the PnP system will auto- matically select

coordinated (conflict-free) configuration settings for the

several cards.

3Plug and Play functionality of the NOS may be toggled between

enable and disable by a selection in your setup.exe run.

DE-220P Series Ethernet Adapter / User’s Guide

10 Installation

Multiple Cards in a Non-PnP

System

In non-PnP systems, the procedure for configuring

multiple DE-220P Series cards is basically a se-

quence of separate single-adapter procedures:

make a preliminary installation of each card alone

in turn, make a setup.exe run to configure that

card, then remove that card and go on to the next.

CAUTION: The following procedure involves operation of the

computer without its chassis housing in place. Caution

is necessary in order to avoid contact with exposed

high-voltage parts. Accidental contact with exposed

internal parts can cause personal injury, and can cause

damage to the computer equipment.

1. Make a preliminary installation of the first DE-

220P Series card by completing Steps 1 through 3

as set out in the “Single-Adapter Installation” sec- tion

above.

2. Restore power to the computer, and configure the

card by running the supplied setup program,

setup.exe. Make a note of the configuration

settings that you select, to help you select different

settings in configuring the remaining cards.

3. Shut down the computer and unplug its power

cord. Remove the (configured) card, and install

the next DE-220P Series card into any open

expansion slot.

4. Restore power to the computer, and configure the

card by running the supplied setup program,

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels D-Link Adaptateur

D-Link

D-Link DWL-G650M - Super G With MIMO Manuel utilisateur

D-Link

D-Link XTREME N DUAL BAND USB ADAPTER DWA-160 Manuel utilisateur

D-Link

D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manuel utilisateur

D-Link

D-Link DBT-122 Manuel utilisateur

D-Link

D-Link PersonalAir DBT-120 Manuel utilisateur

D-Link

D-Link DUB-E130 Manuel utilisateur

D-Link

D-Link DWA-510 Manuel utilisateur

D-Link

D-Link DWA-510 Manuel utilisateur

D-Link

D-Link DWA-182 Manuel utilisateur

D-Link

D-Link AC600 MU-MIMO Manuel utilisateur

D-Link

D-Link DGE-530T Manuel utilisateur

D-Link

D-Link DGE-550SX Manuel utilisateur

D-Link

D-Link DFE-690TXD Manuel utilisateur

D-Link

D-Link WDA-2320 RangeBooster G Manuel utilisateur

D-Link

D-Link DWM-152 Manuel utilisateur

D-Link

D-Link DUB-E130 Manuel utilisateur

D-Link

D-Link DFE-528TX Manuel utilisateur

D-Link

D-Link DWA-642 Manuel utilisateur

D-Link

D-Link DSB-650TX Manuel utilisateur

D-Link

D-Link DUB-2312 Manuel utilisateur

D-Link

D-Link DWA-171 Manuel utilisateur

D-Link

D-Link DWA-642 Manuel utilisateur

D-Link

D-Link DWA-131 Manuel utilisateur

D-Link

D-Link WA121B1 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur