Cypress MB95710M Series Manuel utilisateur

The following document contains information on Cypress products. The document has the series

name, product name, and ordering part numbering with the prefix “MB”. However, Cypress will

offer these products to new and existing customers with the series name, product name, and

ordering part number with the prefix “CY”.

How to Check the Ordering Part Number

1. Go to www.cypress.com/pcn.

2. Enter the keyword (for example, ordering part number) in the SEARCH PCNS field and click

Apply.

3. Click the corresponding title from the search results.

4. Download the Affected Parts List file, which has details of all changes

For More Information

Please contact your local sales office for additional information about Cypress products and

solutions.

About Cypress

Cypress is the leader in advanced embedded system solutions for the world's most innovative

automotive, industrial, smart home appliances, consumer electronics and medical products.

Cypress' microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable,

high-performance memories help engineers design differentiatedproducts and getthem tomarket

first. Cypress is committed to providing customers with the best support and development

resources on the planet enabling them to disrupt markets by creating new product categories in

record time. To learn more, go to www.cypress.com.

MB95710M Series

MB95770M Series

New 8FX 8-bit Microcontrollers

Cypress Semiconductor Corporation • 198 Champion Court • San Jose,CA 95134-1709 • 408-943-2600

Document Number: 002-09307 Rev. *D Revised September 29, 2017

The MB95710M/770M Series is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the

microcontrollers of this series contain a variety of peripheral resources.

Features

■F2MC-8FX CPU core

❐Instruction set optimized for controllers

• Multiplication and division instructions

• 16-bit arithmetic operations

• Bit test branch instructions

• Bit manipulation instructions, etc.

■Clock

❐Selectable main clock source

• Main oscillation clock (up to 16.25 MHz, maximum ma-

chine clock frequency: 8.125 MHz)

• External clock (up to 32.5 MHz, maximum machine clock

frequency: 16.25 MHz)

• Main CR clock (4 MHz ±2%)

• Main CR PLL clock

- The main CR PLL clock frequency becomes 8 MHz ±2%

when the PLL multiplication rate is 2.

- The main CR PLL clock frequency becomes 10 MHz

±2% when the PLL multiplication rate is 2.5.

- The main CR PLL clock frequency becomes 12 MHz

±2% when the PLL multiplication rate is 3.

- The main CR PLL clock frequency becomes 16 MHz

±2% when the PLL multiplication rate is 4.

•Main PLL clock (up to 16.25 MHz, maximum machine

clock frequency: 16.25 MHz)

❐Selectable subclock source

• Suboscillation clock (32.768 kHz)

• External clock (32.768 kHz)

• Sub-CR clock (Typ: 100 kHz, Min: 50 kHz, Max: 150 kHz)

■Timer

❐8/16-bit composite timer ×2 channels

❐8/16-bit PPG ×2 channels

❐16-bit reload timer ×1 channel

❐Event counter ×1 channel

❐Time-base timer ×1 channel

❐Watch counter ×1 channel

❐Watch prescaler ×1 channel

■UART/SIO ×3 channels

❐Full duplex double buffer

❐Capable of clock asynchronous (UART) serial data transfer

and clock synchronous (SIO) serial data transfer

■I2C bus interface ×1 channel

❐Built-in wake-up function

■External interrupt ×8 channels

❐Interrupt by edge detection (rising edge, falling edge, and

both edges can be selected)

❐Can be used to wake up the device from different low power

consumption (standby) modes

■8/12-bit A/D converter ×8 channels

❐8-bit or 12-bit resolution can be selected.

■LCD controller (LCDC)

❐On MB95F714J/F714M/F716J/F716M/F718J/F718M, LCD

output can be selected from 40 SEG ×4 COM and 36 SEG

×8 COM.

❐On MB95F774J/F774M/F776J/F776M/F778J/F778M, LCD

output can be selected from 32 SEG ×4 COM and 28 SEG

×8 COM.

❐Internal divider resistor whose resistance value can be se-

lected from 10 kΩor 100 kΩthrough software

❐Interrupt in sync with the LCD module frame frequency

❐Blinking function

❐Inverted display function

■Low power consumption (standby) modes

❐There are four standby modes as follows:

• Stop mode

• Sleep mode

•Watchmode

• Time-base timer mode

■I/O port

❐MB95F714J/F716J/F718J (number of I/O ports: 75)

• General-purpose I/O ports (CMOS I/O): 71

• General-purpose I/O ports (N-ch open drain): 4

❐MB95F714M/F716M/F718M (number of I/O ports: 74)

• General-purpose I/O ports (CMOS I/O): 71

• General-purpose I/O ports (N-ch open drain): 3

❐MB95F774J/F776J/F778J (number of I/O ports: 59)

• General-purpose I/O ports (CMOS I/O): 55

• General-purpose I/O ports (N-ch open drain): 4

❐MB95F774M/F776M/F778M (number of I/O ports: 58)

• General-purpose I/O ports (CMOS I/O): 55

• General-purpose I/O ports (N-ch open drain): 3

■On-chip debug

❐1-wire serial control

❐Serial writing supported (asynchronous mode)

■Hardware/software watchdog timer

❐Built-in hardware watchdog timer

❐Built-in software watchdog timer

■Power-on reset

❐A power-on reset is generated when the power is switched

on.

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 2 of 172

■Low-voltage detection (LVD) circuit (only available on

MB95F714J/F716J/F718J/F774J/F776J/F778J)

❐Built-in low-voltage detection function

■Comparator ×1 channel

■Clock supervisor counter

❐Built-in clock supervisor counter

■Dual operation Flash memory

❐The program/erase operation and the read operation can be

executed in different banks (upper bank/lower bank) simul-

taneously.

■Flash memory security function

❐Protects the content of the Flash memory.

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 3 of 172

Contents

Features............................................................................. 1

1. Product Line-up ............................................................ 4

1.1 MB95710M Series................................................. 4

1.2 MB95770M Series................................................. 7

2. Packages And Corresponding Products.................... 9

3. Differences Among Products And Notes On

Product Selection ........................................................... 10

4. Pin Assignment .......................................................... 11

5. Pin Functions (MB95710M Series) ............................ 13

6. Pin Functions (MB95770M Series) ............................ 19

7. I/O Circuit Type ........................................................... 24

8. Handling Precautions................................................. 28

8.1 Precautions for Product Design........................... 28

8.2 Precautions for Package Mounting ..................... 29

8.3 Precautions for Use Environment........................ 30

9. Notes On Device Handling......................................... 31

10. Pin Connection ......................................................... 31

11. Block Diagram (MB95710M Series)......................... 33

12. Block Diagram (MB95770M Series)......................... 34

13. CPU Core................................................................... 35

14. Memory Space .......................................................... 36

15. Areas For Specific Applications ............................. 38

16. I/O Map (MB95710M Series)..................................... 39

17. I/O Map (MB95770M Series)..................................... 45

18. I/O Ports (MB95710M Series)................................... 51

18.1 Port 0................................................................. 52

18.2 Port 1................................................................. 56

18.3 Port 2................................................................. 61

18.4 Port 4................................................................. 64

18.5 Port 5................................................................. 66

18.6 Port 6................................................................. 69

18.7 Port 9................................................................. 72

18.8 Port A ................................................................ 74

18.9 Port B ................................................................ 77

18.10 Port C .............................................................. 79

18.11 Port E .............................................................. 82

18.12 Port F............................................................... 85

18.13 Port G .............................................................. 87

19. I/O Ports (MB95770M Series)................................... 90

19.1 Port 0................................................................. 91

19.2 Port 1................................................................. 95

19.3 Port 2............................................................... 100

19.4 Port 6............................................................... 103

19.5 Port 9............................................................... 106

19.6 Port A .............................................................. 108

19.7 Port B .............................................................. 111

19.8 Port C .............................................................. 113

19.9 Port E .............................................................. 116

19.10 Port F............................................................. 119

19.11 Port G ............................................................ 121

20. Interrupt Source Table ........................................... 124

21. Pin States In Each Mode........................................ 125

22. Electrical Characteristics....................................... 131

22.1 Absolute Maximum Ratings............................. 131

22.2 Recommended Operating Conditions ............. 133

22.3 DC Characteristics .......................................... 134

22.4 AC Characteristics........................................... 139

22.5 A/D Converter................................................. 155

22.6 Flash Memory Program/Erase Characteristics 159

23. Sample Characteristics.......................................... 160

24. Mask Options.......................................................... 166

25. Ordering Information.............................................. 167

26. Package Dimension................................................ 168

Document History Page............................................... 171

Sales, Solutions, and Legal Information .................... 172

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 4 of 172

1. Product Line-up

1.1 MB95710M Series

Part number

Parameter

MB95F714J MB95F716J MB95F718J MB95F714M MB95F716M MB95F718M

Type Flash memory product

Clock

supervisor

counter

It supervises the main clock oscillation and the subclock oscillation.

Flash memory

capacity 20 Kbyte 36 Kbyte 60 Kbyte 20 Kbyte 36 Kbyte 60 Kbyte

RAM capacity 512 bytes 1 Kbyte 2 Kbyte 512 bytes 1 Kbyte 2 Kbyte

Power-on reset Yes

Low-voltage

detection reset Yes No

Reset input Selected through software With dedicated reset input

CPU functions

• Number of basic instructions : 136

• Instruction bit length : 8 bits

• Instruction length : 1 to 3 bytes

• Data bit length : 1, 8 and 16 bits

• Minimum instruction execution time : 61.5 ns (machine clock frequency = 16.25 MHz)

• Interrupt processing time : 0.6 µs (machine clock frequency = 16.25 MHz)

General-

purpose I/O

• I/O port : 75

•CMOSI/O :71

• N-ch open drain : 4

• I/O port : 74

•CMOSI/O :71

• N-ch open drain : 3

Time-base timer Interval time: 0.256 ms to 8.3 s (external clock frequency = 4 MHz)

Hardware/

software

watchdog timer

• Reset generation cycle

Main oscillation clock at 10 MHz: 105 ms (min)

• The sub-CR clock can be used as the source clock of the software watchdog timer.

Wild register It can be used to replace 3 bytes of data.

8/12-bit

A/D converter

8 channels

8-bit or 12-bit resolution can be selected.

8/16-bit

composite timer

2 channels

• The timer can be configured as an “8-bit timer × 2 channels” or a “16-bit timer × 1 channel”.

• It has the following functions: interval timer function, PWC function, PWM function and input capture

function.

• Count clock: it can be selected from internal clocks (seven types) and external clocks.

• It can output square wave.

External

interrupt

8 channels

• Interrupt by edge detection (The rising edge, falling edge, and both edges can be selected.)

• It can be used to wake up the device from different standby modes.

On-chip debug • 1-wire serial control

• It supports serial writing (asynchronous mode).

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 5 of 172

UART/SIO

3 channels

• Data transfer with UART/SIO is enabled.

• It has a full duplex double buffer, variable data length (5/6/7/8 bits), an internal baud rate generator

and an error detection function.

• It uses the NRZ type transfer format.

• LSB-first data transfer and MSB-first data transfer are available to use.

• Both clock asynchronous (UART) serial data transfer and clock synchronous (SIO) serial data transfer

are enabled.

I2C bus

interface

1 channel

• Master/slave transmission and reception

• It has the following functions: bus error function, arbitration function, transmission direction detection

function, wake-up function, and functions of generating and detecting repeated START conditions.

8/16-bit PPG

2 channels

• Each channel can be used as an “8-bit timer ×2 channels” or a “16-bit timer ×1 channel”.

• The counter operating clock can be selected from eight clock sources.

16-bit reload

timer

1 channel

• Two clock modes and two counter operating modes are available to use.

• It can output square wave.

• Count clock: it can be selected from internal clocks (seven types) and external clocks.

• Two counter operating modes: reload mode and one-shot mode

Event counter

• The event counter function is implemented by configuring the 16-bit reload timer and 8/16-bit com-

posite timer ch. 1.

• When the event counter function is used, the 16-bit reload timer and 8/16-bit composite timer ch. 1

become unavailable.

LCD controller

(LCDC)

• COM output: 4 or 8 (max) (selectable)

• SEG output: 36 or 40 (max) (selectable)

- If the number of COM outputs is 4, the maximum number of SEG outputs is 40, and the

maximum number of pixels that can be displayed 160 (4 ×40).

- If the number of COM outputs is 8, the maximum number of SEG outputs is 36, and the

maximum number of pixels that can be displayed 288 (8 ×36).

• LCD drive power supply (bias) pins: 5 (max)

• Duty LCD mode

• LCD standby mode

• Blinking function

• Internal divider resistor whose resistance value can be selected from 10 kΩor 100 kΩthrough software

• Interrupt in sync with the LCD module frame frequency

• Inverted display function

Watch counter

• Count clock: four selectable clock sources (125 ms, 250 ms, 500 ms or 1 s)

• The counter value can be selected from 0 to 63. (The watch counter can count for one minute when

the clock source is one second and the counter value is set to 60.)

Watch prescaler Eight different time intervals can be selected.

Comparator 1 channel

Part number

Parameter

MB95F714J MB95F716J MB95F718J MB95F714M MB95F716M MB95F718M

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 6 of 172

Flash memory

• It supports automatic programming (Embedded Algorithm), and program/erase/erase-

suspend/erase-resume commands.

• It has a flag indicating the completion of the operation of Embedded Algorithm.

• Flash security feature for protecting the content of the Flash memory

Standby mode

There are four standby modes as follows:

• Stop mode

• Sleep mode

•Watchmode

• Time-base timer mode

Package LQH080

Part number

Parameter

MB95F714J MB95F716J MB95F718J MB95F714M MB95F716M MB95F718M

Number of program/erase cycles 1000 10000 100000

Data retention time 20 years 10 years 5 years

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 7 of 172

1.2 MB95770M Series

Part number

Parameter

MB95F774J MB95F776J MB95F778J MB95F774M MB95F776M MB95F778M

Type Flash memory product

Clock

supervisor

counter

It supervises the main clock oscillation and the subclock oscillation.

Flash memory

capacity 20 Kbyte 36 Kbyte 60 Kbyte 20 Kbyte 36 Kbyte 60 Kbyte

RAM capacity 512 bytes 1 Kbyte 2 Kbyte 512 bytes 1 Kbyte 2 Kbyte

Power-on reset Yes

Low-voltage

detection reset Yes No

Reset input Selected through software Dedicated

CPU functions

• Number of basic instructions : 136

• Instruction bit length : 8 bits

• Instruction length : 1 to 3 bytes

• Data bit length : 1, 8 and 16 bits

• Minimum instruction execution time : 61.5 ns (machine clock frequency = 16.25 MHz)

• Interrupt processing time : 0.6 µs (machine clock frequency = 16.25 MHz)

General-

purpose I/O

• I/O port : 59

•CMOSI/O :55

• N-ch open drain : 4

• I/O port : 58

•CMOSI/O :55

• N-ch open drain : 3

Time-base timer Interval time: 0.256 ms to 8.3 s (external clock frequency = 4 MHz)

Hardware/

software

watchdog timer

• Reset generation cycle

Main oscillation clock at 10 MHz: 105 ms (min)

• The sub-CR clock can be used as the source clock of the software watchdog timer.

Wild register It can be used to replace 3 bytes of data.

8/12-bit

A/D converter

8 channels

8-bit or 12-bit resolution can be selected.

8/16-bit

composite timer

2 channels

• The timer can be configured as an “8-bit timer × 2 channels” or a “16-bit timer × 1 channel”.

• It has the following functions: interval timer function, PWC function, PWM function and input capture

function.

• Count clock: it can be selected from internal clocks (seven types) and external clocks.

• It can output square wave.

External

interrupt

8 channels

• Interrupt by edge detection (The rising edge, falling edge, and both edges can be selected.)

• It can be used to wake up the device from different standby modes.

On-chip debug • 1-wire serial control

• It supports serial writing (asynchronous mode).

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 8 of 172

UART/SIO

3 channels

• Data transfer with UART/SIO is enabled.

• It has a full duplex double buffer, variable data length (5/6/7/8 bits), an internal baud rate generator

and an error detection function.

• It uses the NRZ type transfer format.

• LSB-first data transfer and MSB-first data transfer are available to use.

• Both clock asynchronous (UART) serial data transfer and clock synchronous (SIO) serial data transfer

are enabled.

I2C bus

interface

1 channel

• Master/slave transmission and reception

• It has the following functions: bus error function, arbitration function, transmission direction detection

function, wake-up function, and functions of generating and detecting repeated START conditions.

8/16-bit PPG

2 channels

• Each channel can be used as an “8-bit timer ×2 channels” or a “16-bit timer ×1 channel”.

• The counter operating clock can be selected from eight clock sources.

16-bit reload

timer

1 channel

• Two clock modes and two counter operating modes are available to use.

• It can output square wave.

• Count clock: it can be selected from internal clocks (seven types) and external clocks.

• Two counter operating modes: reload mode and one-shot mode

Event counter

• The event counter function is implemented by configuring the 16-bit reload timer and 8/16-bit com-

posite timer ch. 1.

• When the event counter function is used, the 16-bit reload timer and 8/16-bit composite timer ch. 1

become unavailable.

LCD controller

(LCDC)

• COM output: 4 or 8 (max) (selectable)

• SEG output: 28 or 32 (max) (selectable)

- If the number of COM outputs is 4, the maximum number of SEG outputs is 32, and the

maximum number of pixels that can be displayed 128 (4 ×32).

- If the number of COM outputs is 8, the maximum number of SEG outputs is 28, and the

maximum number of pixels that can be displayed 224 (8 ×28).

• LCD drive power supply (bias) pins: 4 (max)

• Duty LCD mode

• LCD standby mode

• Blinking function

• Internal divider resistor whose resistance value can be selected from 10 kΩor 100 kΩthrough software

• Interrupt in sync with the LCD module frame frequency

• Inverted display function

Watch counter

• Count clock: four selectable clock sources (125 ms, 250 ms, 500 ms or 1 s)

• The counter value can be selected from 0 to 63. (The watch counter can count for one minute when

the clock source is one second and the counter value is set to 60.)

Watch prescaler Eight different time intervals can be selected.

Comparator 1 channel

Part number

Parameter

MB95F774J MB95F776J MB95F778J MB95F774M MB95F776M MB95F778M

MB95710M Series

MB95770M Series

Document Number: 002-09307 Rev. *D Page 9 of 172

2. Packages And Corresponding Products

Ο: Available

Flash memory

• It supports automatic programming (Embedded Algorithm), and program/erase/erase-

suspend/erase-resume commands.

• It has a flag indicating the completion of the operation of Embedded Algorithm.

• Flash security feature for protecting the content of the Flash memory

Standby mode

There are four standby modes as follows:

• Stop mode

• Sleep mode

•Watchmode

• Time-base timer mode

Package LQD064

LQG064

Part number

Package

MB95F714J MB95F716J MB95F718J MB95F714M MB95F716M MB95F718M

LQH080 ΟΟΟΟΟΟ

Part number

Package

MB95F774J MB95F776J MB95F778J MB95F774M MB95F776M MB95F778M

LQD064 ΟΟΟΟΟΟ

LQG064 ΟΟΟΟΟΟ

Part number

Parameter

MB95F774J MB95F776J MB95F778J MB95F774M MB95F776M MB95F778M

Number of program/erase cycles 1000 10000 100000

Data retention time 20 years 10 years 5 years

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cypress Microcontrôleur

Cypress

Cypress EZ-USB FX3 CYUSB3KIT-001 Manuel utilisateur

Cypress

Cypress CYALKIT-E03 Manuel

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

Cypress

Cypress FM3 Series Manuel utilisateur

Cypress

Cypress CY3641 Manuel utilisateur

Cypress

Cypress WirelessUSB CY3635 N:1 Manuel utilisateur

Cypress

Cypress FR81S CY91F52 Series Mode d'emploi

Cypress

Cypress MB96640 Series Manuel utilisateur

Cypress

Cypress EZ-PD CY4502 Manuel utilisateur

Cypress

Cypress CY8CKIT-001 Manuel utilisateur

Cypress

Cypress S29XS128R Manuel utilisateur

Cypress

Cypress CY14NVSRAMKIT-001 Manuel utilisateur

Cypress

Cypress CY3276 Manuel utilisateur

Cypress

Cypress CapSense CY8CMBR2010 Mode d’emploi

Cypress

Cypress CE219490 Manuel utilisateur

Cypress

Cypress CY8CKIT-030 Manuel utilisateur

Cypress

Cypress PSoC 5 CY8CKIT-050A Manuel utilisateur

Cypress

Cypress S6J3200 Series Manuel utilisateur

Cypress

Cypress FM0+ S6E1C-Series Manuel utilisateur

Cypress

Cypress PERFORM MB96630 Series Manuel utilisateur

Cypress

Cypress CY8C28623-24LTXI Manuel utilisateur

Cypress

Cypress PSoC 4 Manuel utilisateur

Cypress

Cypress CY8CKIT-042-BLE Manuel utilisateur

Cypress

Cypress PSoC CY8CKIT-048 Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur