Cypress MB2146-301A-E Manuel utilisateur

THIS SPEC IS OBSOLETE

Spec No

002

07496

Spec Title

MB2146

301A

E F2MC

8FX Family for

MB95FV100D

101 MCU Board Operation Guide

Replaced by

NONE

MB2146-301A-E

F2MC-8FX Family for MB95FV100D-101

MCU Board Operation Guide

Doc. # 002-07496 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): +1.408.943.2600

www.cypress.com

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 2

Copyrights

and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or refer-

enced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United

States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as spe-

cifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property

rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with

Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable

license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code

form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organi-

zation, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resell-

ers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that

are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely

for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software

is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without fur-

ther notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in

this document. Any information provided in this document, including any sample design information or programming code, is

provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test

the functionality and safety of any application made of this information and any resulting product. Cypress products are not

designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weap-

ons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including

resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where

the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical

component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure

of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and

hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress

products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities,

including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-USB, F-RAM, and

Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list

of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners.

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 3

Preface

Thank you for purchasing the MCU board for the F2MC-8FX family MB95FV100D-101 (model

number: MB2146-301A-E).

The MB2146-301A-E is a development support tool for developing and evaluating applied products

based on the F2MC-8FX family of microcontrollers manufactured by Cypress.

This manual is intended for engineers who use the MB2146-301A-E (referred to below as the MCU

board) to develop applied products based on Cypress F2MC-8FX family microcontrollers. The

manual describes how to handle the MCU board and its functions as well as the setting procedures.

Be sure to read this manual before using the MCU board.

■Using the product safely

This manual contains important information required for using the MB2146-301A-E safely. Be sure to

read through the manual before using the product and follow the instructions contained therein to

use it correctly.

In particular, carefully read the “Caution of the products described in this document” at the beginning

of this manual to understand the requirements for safe use of the product before using it.

After reading the manual, keep it handy for future reference.

■Warranty and liability disclaimers

The specifications of the product are subject to change without notice.

In no event shall Cypress be liable for any loss or damages whatsoever directly or indirectly arising

out of the use of the product.

■Product operating environment

The operating temperature for the product ranges from 5°C to 35°C and the operating relative

humidity from 20% to 80%. Avoid using the product in hot or humid environment and prevent

condensation.

The product is a printed circuit board unit without a chassis such that all of the electronic

components are exposed. Therefore, neither put anything on the product nor touch or let an

electrically charged material contact a metal part of it. Once the product has been powered, try to

keep those objects away from it which can short-circuit it or easily catch fire and burn. Use the

product as horizontal as possible and avoid operating it at a place exposed to strong vibration, dust,

or explosive gas.

Note that using the product not in the above operating environment may unexpectedly cause

personal injury to the user (or another person if present near the product) or physical damage to

properties around the product.

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 4

Preface

You should also keep the packaging materials used for shipping the product. They work well as they

are when you transport the product again, for example, if it becomes out of order and needs to be

repaired.

■Related manuals

Refer to the following manuals for additional information:

❐Hardware manual of the MCU used

❐Data sheet of the MCU used

❐“MB2146-09A-E BGM Adapter Operation Manual”

❐Related “Header board operation manuals”

❐“SOFTUNE Workbench Operation Manual”

❐“SOFTUNE Workbench User’s Manual”

■European RoHS compliance

Products that have a “-E” suffix at the end of the part number are products that conform to the

European RoHS.

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 5

Preface

■Caution of the products described in this document

The following precautions apply to the product described in this manual.

CAUTION

Indicates a potentially hazardous situation which, if not avoided appropriately, may

result in minor or moderate injury and/or damage to the product or the equipment

to which the product is connected, to software resources such as data, or to other

properties.

Cuts, Damage

Before moving the product, be sure to turn off all the power supplies and unplug the

cables. Watch your steps when carrying the product. Do not use the product in an

unstable location such as a place exposed to strong vibration or a sloping surface.

Doing so may let the product fall, resulting in an injury or fault.

Cuts

The product has some sharp-pointed or edged parts inevitably exposed, such as

jumper plugs. Use meticulous care in handling the product not to get injured with

such pointed parts.

Damage

Neither put anything on or apply shock to the product. Once the product has been

powered, do not carry it.

Doing either may cause a fault due to overloading or shock.

Damage

Since the product contains many electronic components, keep it away from direct

sunlight, high temperature, and high humidity to prevent condensation. Do not use

or store the product where it is exposed to much dust or a strong magnetic or

electric field for an extended period of time.

An adverse operating or storage environment can cause a fault.

Damage Use the product within the ranges of its general specifications.

Operating it outside the range of any general specification may cause a fault.

Damage

To prevent electrostatic breakdown, do not let your finger or an object touch any

metal part of the connector. Before handling the product, touch a metal object (such

as a door knob) to discharge static electricity from your body.

Damage

Before turning the power on, in particular, be sure to finish making all the required

connections. To set up and use the product, follow the instructions given in this

document.

Using the product incorrectly or inappropriately may cause a fault.

Damage

Before plugging or unplugging any cable for this product, be sure to turn the power

supply off. When unplugging a cable, remove it while holding the connector without

pulling the cable itself. Pulling the cable itself or bending it may expose or

disconnect the cable core, resulting in a fault.

Damage

Because the product has no casing, it is recommended that it be stored in the

original packaging. Re-transporting the product may damage it to cause a fault.

Keep the packaging materials used for shipment of the product and use them when

re-transporting it.

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 6

Contents

1. Product Outline 7

1.1 Product Configuration ..................................................................................................8

1.2 Appearance and Part Name ........................................................................................9

2. Checking the Delivered Product 10

3. Connections 11

3.1 Connecting the MCU board to the header board.......................................................11

3.2 Connecting the MCU board to the BGM adapter.......................................................12

3.3 Note on Connection ...................................................................................................13

3.4 Disconnection ............................................................................................................13

4. How to Setup 14

4.1 How to the switch and jumper plug on a MCU board setup.......................................14

4.2 How to Oscillator Mounting on a MCU board ............................................................15

4.3 Handling Notes ..........................................................................................................15

4.4 Setting of the Switch and Jumper Plug......................................................................16

4.5 Setting of the Clock Input Selector Switch (SW2)......................................................17

4.6 Setting of the Product Selector Switch (SW3) ...........................................................18

4.7 Setting of the Sub Clock Selector Jumper Plug (S1) .................................................18

4.8 Setting of the LVD2 Detection Voltage Selector Jumper Plug (S2) ...........................19

5. Product Specifications 20

5.1 General Specifications...............................................................................................20

5.2 Functional Explanation ..............................................................................................20

5.3 Clock Settings............................................................................................................22

5.4 Header Board Specifications .....................................................................................23

5.5 Connector Socket Specifications ...............................................................................24

5.6 Pin Assignment of Header Board I/F Connector........................................................25

Revision History 27

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 7

1. Product Outline

The MB2146-301A-E is the MCU board (model number: MB2146-301A-E) mounting an evaluation

MCU for the F2MC-8FX Family of Cypress 8-bit microcontrollers. The F2MC-8FX evaluation

environment, consists of a combination of three products: the header board, MCU board, and BGM

adapter (model number: MB2146-09A-E) as shown in Figure 1-1.

For more information please visit our following websites:

www.cypress.com/documentation/development-kitsboards/mb2146-301a-e

www.cypress.com/documentation/development-kitsboards/mb2146-09a-e

Figure 1-1. System configuration

MB2146-09

BGM adapter

MCU board

Header board

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 8

Product Outline

1.1 Product Configuration

Tables 1-1 lists the product configuration in the MCU board package. Table 1-2 lists optional parts for

the MCU board package that can be purchased separately.

Table 1-1. Product configuration

* : Neither the oscillator nor the capacitor is bundled with the MB2146-301A-E. Therefore, prepare them separately.

Table 1-2. Optional parts

*1: To use the BGM adapter, you need additional tools such as debugger software.

*2: The header board is an interface board to connect the MCU board to your user system. Choose and purchase a type of header board which

is applicable to the production MCU to be used.

Name Model number Description

F2MC-8FX MCU board* MB2146-301A-E MCU board with built-in MB95FV100D-101

Name Model number Description

BGM adapter*1MB2146-09A-E ICE unit for F2MC-8FX

Header board*2MB2146-2xx Connector/package conversion header board

MB2146-301A-E F2MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A 9

Product Outline

1.2 Appearance and Part Name

The appearance of a MCU board and the part name are shown in Figure 1-2.

Figure 1-2. MCU board appearance figure

BGM

ADAPTER

SUB CLOCK

C B A

CLK

CLK S.V.

APB8

X0A

X1A

PRODUCT SELECT

LVD4

LVD3

LVD2

LVD1

LVD0

GNDVCC

LVD2OFFLVD1

MAIN CLOCK

1 2 3 4 1 2 3 4

ON ON

HEADER I/F CONNECTOR A

HEADER I/F CONNECTOR B

* : Note used during debugging.

(1) LVD2 detection voltage selector jumper plug*

(2) Voltage selector switch

(3) Product selector switch

(4) LVD selector switch

(5) Clock selector switch (SW1-1: CLK)

Clock supervisor selector switch (SW1-2 : CLK S.V.)

APB8 bus output selector switch (SW1-3: APB8) (for extension) *

C-pin selector switch (SW1-4: C)

(6) Clock input selector switch (SW2-1: X0, SW2-2: X1, SW2-3: X0A, SW2-4: X1A)

(7) Sub clock crystal oscillator mounting socket

(8) Main clock crystal oscillator mounting socket

(9) Sub clock selector jumper plug

(10) BGM adapter connector

(11) Header board I/F connector A

(12) Header board I/F connector B

(13) Evaluation MCU (MB95FV100D-101)

(14) Incorrect insertion prevention guard

Top view Bottom view

(1)

(5)

(7)

(3)

(9)

(8)

(13)

(14)

(12)

(2)

(4)

(10)

(6)

(11)

Table des matières

Autres manuels Cypress Microcontrôleur

Cypress

Cypress CY8CKIT-042 Manuel utilisateur

Cypress

Cypress FR MB91460 Series Manuel du propriétaire

Cypress

Cypress Perform PSOC 5LP PROTOTYPING KIT Manuel utilisateur

Cypress

Cypress CY8CKIT-041-41XX Manuel utilisateur

Cypress

Cypress CY3684 Manuel utilisateur

Cypress

Cypress CY8CKIT-026 Manuel utilisateur

Cypress

Cypress UNIVERSAL CAPSENS CY3280-BBM Manuel utilisateur

Cypress

Cypress CY8CKIT-046 Manuel utilisateur

Cypress

Cypress MB9BF568R Series Manuel utilisateur

Cypress

Cypress CY3280-CPM1 Manuel utilisateur

Cypress

Cypress CY3668 Manuel utilisateur

Cypress

Cypress Universal CapSense CY3280-22x45 Manuel utilisateur

Cypress

Cypress CY3280-BSM Manuel utilisateur

Cypress

Cypress CY3652 Manuel utilisateur

Cypress

Cypress EZ-PD CY4502 Manuel utilisateur

Cypress

Cypress CY3664-EXT Manuel utilisateur

Cypress

Cypress PSoC CY8CPROTO-062-4343W Manuel utilisateur

Cypress

Cypress EZ-USB CYUSB3KIT-001 Manuel utilisateur

Cypress

Cypress CY8CKIT-042 Manuel utilisateur

Cypress

Cypress WirelessUSB N:1 DVK Manuel utilisateur

Cypress

Cypress CY3660 enCoRe V Manuel utilisateur

Cypress

Cypress CY15FRAMKIT-002 Manuel utilisateur

Cypress

Cypress FR Series Manuel utilisateur

Cypress

Cypress CY15FRAMKIT-002 Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur