CYP CHDBT-1H7CPL Manuel utilisateur

CHDBT-1H7CPL

1 by 8 HDMI over HDMI & CAT5e/6/7 Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 August 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 06/08/14 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................3

6.3 IR Cable Pin Assignment..................5

7. Connection Diagram ............................ 6

8. Specications ........................................ 7

8.1 CAT5e/6/7 Cable Specication .....8

9. Acronyms ............................................... 8

1. INTRODUCTION

The HDMI over HDMI and CAT5e/6/7 Splitter can split and distribute

a single HDMI input and 2-way IR control up to seven CAT5e/6/7

outputs and includes a simultaneous HDMI bypass output. It supports

resolutions up to 1080p Full HD, 4K×2K timing, 3D and multi-channel

digital audio formats (such as LPCM 7.1CH, Dol-by TrueHD, Dolby

Digital Plus and DTS-HD). The HDMI bypass output can be connected

to an HDMI display or cascaded to another splitter. The CAT5e/6/7

outputs can be connected to CAT5e/6/7 to HDMI Receivers to extend

the operating distance up to 60 meters with Power Over Cable

feature.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• HDMI over HDMI & CAT5e/6/7 Splitter

• IR Receiver x 1

• IR Blaster x 1

• 24V DC Power Adaptor

• Power Cord

• Operation Manual

4. SYSTEM REQUIREMENTS

• Source equipment with HDMI output connector

• Display TV/Monitor with HDMI input connector

• HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables

5. FEATURES

• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant

• Simultaneous HDMI and CAT5e/6/7 outputs

• Supports one HDTV and seven CAT5e/6/7 outputs

• Supports data rate from 250Mbps up to 3Gbps

• Supports wide range of PC resolutions from VGA to WUXGA and

HDTV resolutions up to 4Kx2K (3840x2160@24/25/30Hz & 50/60

YUV_420 and 4096x2160@24Hz & 50/60 YUV_420).

• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio transmission (32-192kHz sample rate)

• Supports distances up to 60 meters through CAT5e/6/7 cables

• Supports selection of Standard or TV EDID settings

• Supports Power over Cable (PoC) feature

• Supports USB service port

• Supports Bidirectional IR control

• The 3D signal display follow by display TV’s EDID

Note:

1.This system was tested with CAT6/23AWG cables, results may vary

with cables of a different specication.

2.Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI

cable and display in order for proper image displaying.

3.The PoC function is designed for powering compatible Receiver

units only non-PoC Receivers will need their own power supply.

Receivers of another brand may not be compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER SYNC

HDMI

LINK LINK 1LINK 2LINK 3LINK 4 LINK 5 LINK 6 LINK 7

CAT5e/6/7 OUT

1 2 3 4

1POWER LED: Once the power supply is connected the LED will

illuminate.

2SYNC: This LED will illuminate when the HDMI input port connected

to an active source.

3HDMI LINK: This LED will illuminate when HDMI output is connected

to TV or display monitor.

4LINK 1~7: The link LED will illuminate when both the input source

and output display signals are connected through CAT cable.

6.2 Rear Panel

1HDMI OUTHDMI IN 234567

SERVICE

CAT5e/6/7 OUT

STD TV

DC 24V

IR IN IR OUT

EDID

1 2 3 6 7 84 5

1HDMI IN: Connect with source equipment such as DVD/Blu-ray or

PS3 player.

2HDMI OUT: Connect to HDMI display for instant image display or

cascade with another family type Transmitter.

3CAT5e/6/7 OUT 1~7: Connect these ports to CAT5e/6/7 to HDMI

Receivers with CAT5e/6/7 cable to extend the signal up to 60m.

4IR IN: Connect with IR Extender to receive IR signal from Transmitter

side and blast out at Receiver side. Ensure that remote controller

being used is within the direct line-of-sight of the IR Extender.

5IR OUT: Connect with IR Blaster to blast out the IR signal received

from the Receiver side. Place the IR Blaster in direct line-of-sight of

the equipment to be controlled.

6EDID STD/TV: The default factory setting is on STD, leave as it is

when the display is properly. When in TV mode the unit will detect

the 1st CAT5e/6/7 output’s EDID when it obtain a 4Kx2K EDID and

send out the signal accordingly to other output ports. If the 1st

CAT5e/6/7 output is without a 4Kx2K's EDID the unit will detect all

output's EDID and send out the signal that all outputs can accept.

This device obtain the last memory function therefore, the device

will use the last output port 1's EDID when output port 1 is not

connected to a display after power cycling or switching in

between the EDID setting.

Switch to STD to use build-in EDID if the display has problem.

STD EDID’s video at 1080p@60Hz and audio at LPCM 2CH.

7SERVICE: This slot is reserved for factory service only.

8DC 24V: Plug the 24V DC power supply into the unit and connect

the adaptor to an AC outlet.

6.3 IR Cable Pin Assignment

Power

IR Blaster Signal

IR Signal

Power

Grounding

IR Extender

IR Blaster

Table des matières

Autres manuels CYP Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur

Expert

Expert EX-9543 Manuel utilisateur