CYP DCT-2 Manuel utilisateur
DCT-2
Digital Audio Converter with Dual Outputs
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 24/12/12 Updated format/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel.........................................2
6.2 Rear Panel .........................................2
6.3 Left Panel ...........................................3
6.4 Top Panel ...........................................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
9. Acronyms ............................................... 6
1
1. INTRODUCTION
The Digital Audio Converter with Dual Outputs will convert between
Coaxial and Optical digital audio formats. This compact and
convenient unit accepts a stereo or surround (up to 5.1 channels)
audio signal through either Coaxial cable or Optical cable, and
passes the unchanged signal to both its Coaxial and Optical output
ports. With its built-in signal enhancement feature, the unit also serves
as a repeater of digital audio signals to extend up to double the
transmission distance.
2. APPLICATIONS
• Convert an Optical digital signal to a Coaxial digital signal
• Convert a Coaxial digital signal to an Optical digital signal
• Distribute digital audio to 2 locations
• Extend your Optical or Coaxial cable distances
3. PACKAGE CONTENTS
• Digital Audio Converter with Dual Outputs
• 5 V/1.2 A Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Digital audio source device such as DVD or CD player with Optical or
Coaxial cables and audio output device such as an amplier or AV
receiver with Optical or Coaxial digital input.
5. FEATURES
• Supports two-way conversion: coaxial to optical or optical to
coaxial
• Supports input audio signals from 2 channels to up to 5.1 channels,
output signal follows input
• Supports signal enhancement of S/PDIF audio and extends the
transmission distance, through coaxial and/or optical cables
• Select one input from coaxial or optical input ports, and send
the S/PDIF audio signal to both coaxial and optical output ports
simultaneously
• Compact and easy to use
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2
To slink
Coax
In
1
Coaxial In: Connect to the output of an S/PDIF digital audio source
device such as DVD player or set-top box, using Coaxial cable.
2
Toslink In: Connect to the output of an S/PDIF digital audio source
device such as CD player or Media Streamer, using Optical cable.
6.2 Rear Panel
1 2
Coax
To slink
Out
1
Toslink Out: Connect to the input of an S/PDIF digital audio
equipment such as an amplier, using Optical cable.
2
Coaxial Out: Connect to the input of your S/PDIF digital audio
equipment such as an AV Receiver, using Coaxial cable
3
6.3 Left Panel
1 2
DC 5V
To s
Coaxial
1
Tos/Coaxial: Selects the current audio source, either optical or
coaxial.
2
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC wall outlet.
6.4 Top Panel
Coax to Toslink
2 way Converter
& Repeater
1
1
POWER LED: The LED will illuminate when the power is connected.
4
7. CONNECTION DIAGRAM
Coax to Toslink
2 way Converter
& Repeater
DVD PlayerSet-top Box
Digital Audio Input
(Optical)
Digital Audio
Output (Optical)
AV Receiver AV Receiver
Digital Audio Input
(Coaxial)
Digital Audio
Output (Coaxial)
Power
Supply
5
8. SPECIFICATIONS
Input Ports 1×Coaxial (RCA connector)
1×Optical Fiber (TOSLINK connector)
Input Format LPCM 2 CH, Compressed audio Dolby
Digital 2/5.1 CH & DTS 2/5.1 CH
Output Ports 1×Coaxial (RCA connector)
1×Optical Fiber (TOSLINK connector)
Power Supply 5 V/1.2 A switching power adaptor (with
universal plug, CE/FCC/UL certied)
Dimensions 58 mm (W)×46 mm (D)×24 mm (H)
Weight 25 g (Unit only)
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0 °C~ 40 °C
Power Consumption 0.7 W
Table des matières
Autres manuels CYP Convertisseur de média
CYP
CYP AU-D2 Manuel utilisateur
CYP
CYP CM-330 Manuel utilisateur
CYP
CYP AU-1 Manuel utilisateur
CYP
CYP SY-P291 Manuel utilisateur
CYP
CYP CLUX-16EN Manuel utilisateur
CYP
CYP CPCD-3A Manuel utilisateur
CYP
CYP CSC-5500 Manuel utilisateur
CYP
CYP AU-22DD Manuel utilisateur
CYP
CYP CLUX-DVI2SDIA Manuel utilisateur
CYP
CYP AU-D1 Manuel utilisateur
CYP
CYP CPRO-SE2DD Manuel utilisateur
CYP
CYP CP-280H Manuel utilisateur
CYP
CYP CP-259H Manuel utilisateur
CYP
CYP SY-720SC Manuel utilisateur
CYP
CYP PU-160ETH Manuel utilisateur
CYP
CYP CSC-V102P Manuel utilisateur
CYP
CYP CETH-4HDI Manuel utilisateur
CYP
CYP PRO-SDIHDMI Manuel utilisateur
CYP
CYP CP-267 Manuel utilisateur
CYP
CYP CLUX-14S Manuel utilisateur
