CYP OR-HD22S Manuel utilisateur
OPERATION MANUAL
OR-HD22S
v1.3 HDMI 2 x 2 Matrix Switcher
Precautions
Failure to follow the precautions described below may cause damage to this v1.3
HDMI Matrix and void the warranty.
• DO NOT open the case. This will void the warranty, if you nd a problem with
this product, please return it to your retailer or seller who will assist you or
provide you with a solution.
• DO NOT use third-Party AC adaptors or power cords. This may damage the
Matrix.
• DO NOT bump, jar or drop the product because it may cause damage and void
the warranty.
• DO NOT allow liquids to come into contact with the Matrix because they may
cause damage.
Table of Contents
Finden Sie ab Seite 9.
1. Introduction 1
2. Application 1
3. Package Contents 1
4. System Requirements 2
5. Features 2
6. Operation Controls and Functions 3
6.1 Rear Panel 3
6.2 Front Panel 4
7. Remote Control 5
8. RS-232 Protocol 6
8.1 Command Sets 7
10. Connection Diagram 8
11. Specications 9
1. Introduction
Thank you for purchasing this HDMI V1.3 Matrix. As HDMI products become
increasingly popular, users often have multiple HDMI sources and displays. This
HDMI matrix provides an excellent and convenient solution for connecting all
of your HDMI equipment. You can select which source to view on each display
using the remote control. This matrix can also transfer deep colour video and
bitstream audio with maximum performance. It supports HDMI 1.3, HDCP 1.1
and DVI 1.0.
Please follow this manual to start enjoying the benets of this Matrix. We
suggest you keep it in a safe place for future reference.
2. Application
• Multi-source / multi-display control.
• Home entertainment integration.
• Multi-task project presentation.
• Showroom Display.
• Advertising display control.
3. Package Contents
• 2 by 2 v1.3 HDMI Matrix.
• Remote Control CR33 (with Battery)
• IR Receiver
• Power Cord
• 5V DC power supply adaptor.
• Operation Manual.
Page 1
Page 2
4. System Requirements
HDMI source device(s) and HDMI display device(s).
5. Features
• v1.3HDMI, HDCP 1.1 and DVI 1.0 compliant.
• Supports digital video formats in Deep Color (12bit) and new lossless digital
audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio).
• The HDMI input is compensated, clock / phase adjusted and jitter eliminated
so the output is a brand new standard HDMI signal.
• LEDs on each output illuminate to indicate which input is selected.
• Compatible with all HDMI sources and displays.
• Supports a wide range of PC and HDTV resolutions, from VGA to UXGA and 480i
to 1080p including 1080p24fps.
• Supports RS-232 control.
• Supports IR remote control and IR extender.
• Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
• Supports LPCM 7.1 channel audio from each independent HDMI output.
• At 1080p/8-bit & 12-bit resolution, the Input/ Output can run up to 15/15
metres.
• Switchable EDID function, choose between built in EDID or read the external
EDID of connected display.
• The HDCP and HDMI/DVI LEDs will illuminate accordingly to dene the input
source’s format.
• When HDMI signal progresses through the system, it is re-timed, and level-
compensated.
• High performance v1.3 HDMI Matrix with two inputs,two outputs and remote
control allowing you to link all your favourite HDMI devices and enjoy your
music, movies and games.
Page 3
6. Operation Controls and Functions
1. Remote control sensor.
2. Power button & LED Indicator: Press the button to turn the unit on/off. The
LED lights green when power is on and red when the power is off.
3. Input select ‘A’ button/indicators: Press this button repeatedly to cycle
through your inputs and select which source to route to the HDMI A output.
When the source is connected via HDMI the HDMI/DVI LED will illuminate.
If the source is connected via a DVI adaptor then the light will remain off.
When the input source has HDCP copy protection implemented the HDCP
light will illuminate.
4. Input select ‘B’ button/indicators: Press this button repeatedly to cycle
through your inputs and select which source to route to the HDMI B output.
When the source is connected via HDMI the HDMI/DVI LED will illuminate.
If the source is connected via a DVI adaptor then the light will remain off.
When the input source has HDCP copy protection implemented the HDCP
light will illuminate.
6.1 Front Panel
12 3 4
Page 4
1. IR IN: Place the IR receiver end of cable in front of your display and connect
jack end to IR input, you can then use the supplied remote control to switch
sources when the matrix is out of sight.
2. RS-232: Connect the COM port of your PC for distant control via RS-232.
Commands and settings can be found in section 8 of this manual.
3. EDID control switch: setting is either: STD(internal) or TV(external)*
*Note:
Please Leave the EDID switch in the default factory setting of ‘TV’ if the displays are working
correctly, the unit will read the EDID data from display connected to the rst hdmi output and
store it. If the rst device is connected via a DVI adaptor, the matrix will move on to the second
output to check for a HDMI connection. The detection priority of the matrix is v1.3 HDMI, v1.2
HDMI, DVI. If you experience any display problems with the EDID switch in the TV position, you
can set the EDID switch to STD, the unit will then use its built in EDID which supports 1080p
12bit(max) video (does not support xvYCC) and pcm 2 channel audio.
Please note that If you change the EDID switch’s setting on the Matrix then you have to reboot
(power off, unplug and turn on again) for your selection to take effect.
4. HDMI OUTPUTS A&B: Connect each of these output ports to a HDMI display.
The device supports repeater function and each output port can supports 16
key sets of KSV and 2 outputs can support a total of 32 key sets of KSV.
5. HDMI INPUT 1 & 2: Connect these input ports to HDMI or DVI (via adaptor,
not supplied) outputs of your source equipment such as DVD player or set-
top-box.
6. DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to
an AC wall outlet.
6.2 Rear Panel
2
13 4 5 6
Page 5
7. Remote Control
1. Power: Press the button to turn the unit
On/Off.
2. Input Select for HDMI OUT ‘A’: Press 1 or
2 to select the required input source for
HDMI OUT A.
3. Input Select for HDMI OUT ‘B’: Press 1 or
2 to select the required input source for
HDMI OUT B.
*Note: buttons labeled C&D have no effect on
this model
1
2
3
A
D
C
B
OUTPUT
OUTPUT
OUTPUT
OUTPUT
POWER
CR-33
Page 6
OR-HD22S Remote Control Console
PIN Denition
→
←
PIN Denition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
8. RS-232 Protocol
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1bit
Flow Control: None
Page 7
8.1 Command Sets
COMMAND ACTION
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 11 Output A select Input 1
PORT 12 Output A select Input 2
PORT 13 (No Function)
PORT 14 (No Function)
PORT 21 Output B select Input 1
PORT 22 Output B select Input 2
Table des matières
Autres manuels CYP Commutateur matriciel
CYP
CYP CPLUS-V4H2HPIP Manuel utilisateur
CYP
CYP CPLUS-1082VA Manuel utilisateur
CYP
CYP PUV-1210PL-RX Manuel utilisateur
CYP
CYP MA-421 Manuel utilisateur
CYP
CYP CDPS-U10H2HFS Manuel utilisateur
CYP
CYP CMSI-8H8HS Manuel utilisateur
CYP
CYP OR-HD88S Manuel utilisateur
CYP
CYP HDBT PU-4H4HBTE-4K Manuel utilisateur
CYP
CYP CDPS-UA6H2HFS Manuel utilisateur
CYP
CYP CPLUS-V4H4HPA Manuel utilisateur
CYP
CYP PUV-44XPL-4K22-KIT Manuel utilisateur
CYP
CYP CMPRO-4H4H Manuel utilisateur
CYP
CYP EL-42M-PIP Manuel utilisateur
CYP
CYP CMSI-8H8CVL Manuel utilisateur
CYP
CYP CMSI-3232 Manuel utilisateur
CYP
CYP CMPRO-U8H8CVPL Manuel utilisateur
CYP
CYP CDPS-44SM Manuel utilisateur
CYP
CYP OR-44U-4K22 Manuel utilisateur
CYP
CYP CDPS-44SM Manuel utilisateur
CYP
CYP SM-2X4-HDMI-LC Manuel utilisateur
