Craftsman 919.167243 Manuel utilisateur

Owner's Manuam

PermanentJy Lubricated

Tank Mounted

AIR COMPRESSOR

ModeJ No.

Safety Guidelines

Assembly

Operation

Maintenance

Service and Adjustments

Repair Parts

CALIT|ON: Read the Safety Guidelines

and All instructions CarefulIy Before

Operating.

Sears, Roebuck and Co., Hoffman Estates, mL(}0179 U.S.A.

Visit our Craftsman website: www, sears,com/craftsman

A09706 R_v,0 1/s/0._

WARRANTY ................................................ 2

SPECiFiCATiON CHART ..................................... 3

SAFETY GUiDELiNES ...................................... 3-8

GLOSSARY ................................................ 9

ACCESSORIES ............................................ 9

DUTY CYCLE .............................................. 9

ASSEMBLY ............................................... 10

iNSTALLATiON ......................................... 11-12

OPERATION ........................................... 13-15

MAINTENANCE ............................................ 16

SERVICE AND ADJUSTMENTS ............................ 17-18

STORAGE ................................................ 18

TROUBLESHOOTING GUIDE ............................. 19-21

REPAIR PARTS ......................................... 22-25

ESPANOL .............................................. 26-46

REPAIR PROTECTION AGREEMENTS ......................... 47

HOW TO ORDER REPAIR PARTS ...................... back cover

FULL ONE YEAR WARRANTY AiR COMPRESSOR

If this CRAFTSMAN Air Compressor fails due to a defect in material or

workmanship within one year from the date of purchase, Sears will at

its option repair or replace it free of charge. Contact your nearest Sears

Service Center (1-800-4-MY-HOME O) to arrange for repair, or return the Air

Compressor to the place of purchase for replacement.

If this Air Compressor is used for commercial or rental purposes, this warranty

applies for only ninety days from the date of purchase.

This warranty gives you specific legal rights and you may have other rights

which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

A09706 2= ENG

ModeB Ne. 919-167243

Running HP 1.5

Sore 1.875"

Stroke 1.25"

Voltage-Single Phase 120V

Minimum Branch Circuit Requirement 15 amps

Fuse Type Time Delay

Air Tank Capacity 15

Approx. Cut-In 120

Approx. Cut-out 150

SCFM @ 40 psig 4.9

SCFM @ 90 psig 3.5

Refer to Glossary for abbreviations.

This manual contains information that is important for you to know and

understand. This information relates to protecting YOUR SAFETY and

PREVENTING EQUIPMENT PROBLEMS. To help you recognize this

information, we use the symbois below. Please read the manual and pay

attention to these symbols.

situation which, if not avoided, will result

in death or serious injury.

_ Indicates a potentially

' hazardous s tuat on

which, if not avoided, could result in

death or serious in'_

_ Indicates a potentially

hazardous situation

which, if not avoided, _ result in minor

or moderate injury..

_Used without the

safety alert symbol

indicates a potentially hazardous situation

which, if not avoided, may result in

re err dama e.

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains

chemicals known (to the State of California) to cause cancer, birth defects

or other reproductive harm. Some exampme of these chemicals are:

lead from lead-based paints

crystalline silica from bricks and cement and other masonry products

arsenic and chromium from chemically-treated Bumber

Your risk from these exposures varies, depending on how often you do

this type of work. To reduce your exposure to these chemicals: work in

a wen ventilated area, and work with approved safety equipment, always

wear MSNA/NIOSN approved, proper_y fitting face mask or respirator when

using such teems.

When using air teems, basic safety precautions shoumd always be followed

to reduce the risk of of personal injury.

3-ENG A09706

Gave these instructions

Improper operation or maintenance of this product could result in serious injury and

property damage. Read and understand all warnings and operation instructions before

using this equipment.

WARNING: Risk of explosion or fire _,i

What Could Happen How To Prevent It

mtis normal for electrical contacts within Always operate the compressor in a

the motor and pressure switch to spark, well ventilated area free of combustible

materiame, gasoline, or somvent vapors.

mfelectrical sparks from compressor if spraying flammable materials, locate

come into contact with flammable compressor at least 20 feet away from

vapors, they may ignite, causing fire or spray area. An additional length of hose

e×plosion, may be required.

Store flammable materials in a secure

location away from compressor.

Restricting any of the compressor

ventilation openings will cause serious

overheating and could cause fire.

Unattended operation of this product

couM resumt in personal injury or

property damage. To reduce the risk

of fire, do not anew the compressor to

operate unattended.

Never place objects against or on top

of compressor. Operate compressor in

an open area at least 12 inches away

from any wan or obstruction that would

restrict the flow of fresh air to the

ventilation openings.

Operate compressor in a clean, dry well

ventilated area. Do not operate unit

indoors or in any confined area.

Always remain in attendance with the

product when it is operating.

ABways disconnect eRectrical power by

moving pressure switch lever to the off

position and drain tank daily or after

each use,

A09706 4= ENG

WARNING: Risk of Bursting "_1

Air Tank: The following conditions could lead to a weakening of the tank, and result

in a violent tank explosion and could cause property damage or serious injury.

What Could Happen How To Prevent it

FaiRure to properly drain condensed Drain tank daily or after each use, If tank

water from tank, causing rust and develops a leak, replace it immediately

thinning of the steeB tank. with a new tank or replace the entire

corn presser

Modifications or attempted repairs to

the tank.

Unauthorized modifications to the

unRoader valve, safety valve, or any

other components which control tank

pressure,

Excessive vibration can weaken the

air tank and cause rupture or

explosion

ATTACHMENTS &ACCESSORIES:

Exceeding the pressure rating of air

tools, spray guns, air operated

accessories, tires, and other inflatables

can cause them to explode or fly apart,

and could result in serious injury.

Never drill into, weld, or make any

modifications to the tank or its

attachments.

The tank is designed to withstand specific

operating pressures. Never make

adjustments or parts substitutions to

alter the factory set operating

pressures,

For essential control of air pressure, you

must install a pressure regulator and

pressure gauge to the air outlet (if not

equipped} of your compressor. Follow the

equipment manufacturers recommendation

and never exceed the maximum allowable

pressure rating of attachments. Never use

compressor to inflate small low

pressure objects such as children's

toys, footbaHs, basketbaHs, etc.

i D iii_,

WARNING: Risk from FrayingObjects

What Coumd Happen How To Prevent It

The compressed air stream can cause

soft tissue damage to exposed skin and

can propel dirt, chips, loose particles,

and small objects at high speed,

resulting in property damage or personal

injury.

Always wear ANSI Z87.1 approved

safety glasses with side shieRds when

using the compressor.

Never point any nozzle or sprayer

toward any part of the body or at other

peopBe or animals.

Always turn the compressor oft and

bleed pressure from the air hose and tank

before attempting maintenance, attaching

tools or accessories.

5= ENG A09706

WARNING: Risk of Electticam Shock

What CouBd Happen

Your air compressor is powered by

eRectricity, Like any other electrically

powered device, If it is not used

property it may cause eRectric shock.

Repairs attempted by unqualified

personneB can result in serious injury

or death by electrocution.

Electrical Grounding: Failure to provide

adequate grounding to this product

could result in serious injury or death

from electrocution.

See grounding instructions.

Now To Prevent it

Never operate the compressor outdoors

when it is raining or in wet conditions.

Never operate compressor with

protective covers removed or damaged.

Any electricam wiring or repairs required

on this product should be performed by

authorized service center personnel in

accordance with national and local

electrical codes.

Make certain that the electrical circuit

to which the compressor is connected

provides proper eBectrical grounding,

correct voltage and adequate fuse

protection.

WARNING: Risk to Breathing

What Could

The compressed air directly from your

compressor is not safe for breathing.

The air stream may contain carbon

monoxide, toxic vapors, or solid

particles from the tank. Breathing these

contaminants can cause serious injury

or death.

Sprayed materials such as paint, paint

solvents, paint remover, insecticides,

weed killers, may contain harmful

vapors and poisons.

Now To Prevent It

Air obtained directly from the compressor

shouM never be used to supply air for

human consumption. In order to use air

produced by this compressor for

breathing, suitable filters and in-line

safety equipment must be property

installed. In-line filters and safety

equipment used in conjunction with the

compressor must be capabBe of treating

air to aH appBicable local and federam

codes prior to human consumption.

Work in an area with good cross

ventilation. Read and follow the safety

instructions provided on the label or

safety data sheets for the materiaBs

you are spraying. Use a NmOSH/MSHA

approved respirator designed for use

with your specific application.

A09706 6-ENG

WARNING: Risk of Burns

What Could Happen How To Prevent it

Touching exposed metal such as the

compressor head or outlet tubes, can

result in serious burns.

Never touch any exposed metal parts

on compressor during or immediately

after operation. Compressor win remain

hot for several minutes after operation.

Do not reach around protective shrouds

or attempt maintenance until unit has

been allowed to cool

WARNING: Risk from Moving Parts _

What Could Happen New To Prevent mt

Moving parts such as the pulley, Never operate the compressor with

flywheel, and belt can cause serious guards or covers which are damaged or

injury if they come into contact with you removed.

or your clothing.

Attempting to operate compressor with Any repairs required on this product

damaged or missing parts or should be performed by authorized

attempting to repair compressor with service center personnel

protective shrouds removed can expose

you to moving parts and can result in

serious injury.

WARNING: Risk of Falling

What Could Happen

A portable compressor can fan from

a table, workbench, or roof causing

damage to the compressor and could

result in serious injury or death to the

operator.

Now To Prevent It

Always operate compressor in a stable

secure position to prevent accidental

movement of the unit. Never operate

compressor on a roof or other elevated

position. Use additionaB air hose to

reach high locations.

7-ENG A09706

B,_ i,ll

WARNING: Risk of Serious Injury or Property DamageWhen Transporting Compressor

(Fire, Inhalation, Damage to Vehicle Surfaces)

What Could Happen

Oil can leak or spill and could result in

fire or breathing hazard; serious injury or

death can result, oil leaks will damage

carpet, paint or other surfaces in vehicles

or trailers.

How To Prevent it

Always place COMPRESSOR on a

protective mat when transporting to

protect against damage to vehicle from

leaks. Remove COMPRESSOR from

vehicle immediately upon arrival at your

destination.

iiiiiiiii_.... B'_ i'l

WARNING: Risk of Unsafe Operation

How To Prevent it

What Could Happen

Unsafe operation of your air compressor

could lead to serious injury or death to

you or others.

Review and understand all instructions

and warnings in this manual.

Become familiar with the operation and

controls of the air compressor.

Keep operating area clear of all persons,

pets, and obstacles.

Keep children away from the air

compressor at aH times.

Do not operate the product when

fatigued or under the influence of

alcohol or drugs. Stay alert at all times.

Never defeat the safety features of this

product.

Equip area of operation with a fire

extinguisher.

Be not operate machine with missing,

broken, or unauthorized parts.

SAVE THESE INSTRUCTIONS

A09706 8-ENG

Become familiar with these terms

before operating the unit.

Ot=M: Cubic feet per minute.

Set=M: Standard cubic feet per

minute; a unit of measure of air

delivery.

PSlG: Pounds per square inch

gauge; a unit of measure of pressure.

Code Certification: Products that

bear one or more of the following

marks: UL, CUL, ETL, CETL, have

been evaluated by OSHA certified

independent safety laboratories and

meet the applicable Underwriters

Laboratories Standards for Safety.

Cut-In Pressure: While the motor

is off, air tank pressure drops as

you continue to use your accessory.

When the tank pressure drops to a

certain Iow level the motor wilI restart

automatically. The low pressure

at which the motor automatically

restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air

compressor is turned on and begins

to run, air pressure in the air tank

begins to build. It builds to a certain

high pressure before the motor

automatically shuts off, protecting

your air tank from pressure higher

than its capacity. The high pressure

at which the motor shuts off is called

"cut-out" pressure.

Branch Circuit: Circuit carrying

electricity from electrical panel to

outlet.

This unit is capable of powering the following Accessories. The accessories are

available through the current Power and Hand Tool Catalog or full-line Sears

stores.

Accessories

® In Line Filter

+ Tire Air Chuck

® Quick Connector Sets

(various sizes)

+ Air Pressure Regulators

+ Oil Fog Lubricators

+ Air Hose: 1/4", 3/8" OR 1/2" LD. in

various lengths

Refer to the selection chart located

on the unit to select the tools this unit

is capable of powering.

This air compressor pump is

capable of running continuously.

However, to prolong the life of your

air compressor, it is recommended

that a 50%-75% average duty

cycle be maintained; that is, the air

compressor pump should not run

more than 30-45 minutes in any given

hour.

9+ ENG A09706

Contents of Carton

1 - Air Compressor

2- Wheels

2 - Shoulder Bolts, 3/8-16

2 - Hex Nuts, 3/8-16

2 - Molded Foot Bumpers

2 - Screws, 1/4 x 1.50

1- Handle

1 - Handle Grip

2 - Screws, #10-16 x 1.00

Tools Required for

1 - 9/16" socket or open end

wrench

1 - 3/8" socket

installing Handles,

Wheels, and Molded Foot

The wheems

and handme do

not provide adequate cmearance,

stability or support for pulling the

unit up and down stairs or steps,

The unit must be lifted, or pushed

up a ramp.

1. Submerge handle grip into warm

soapy water to make installation

easier. Remove handle grip from

soapy water and slide onto

handle.

2. Slide handle through holes in

compressor saddle onto tabs.

Secure with screws, one on each

side.

Compressor Saddme

HandRe Screw

It wHmbe necessary

to brace or

support one side of the unit when

installing the wheems because the

compressor will have a tendency

to tip,

3. InstalI one shoulder bolt

and one nut for each wheel.

Tighten securely. The outfit

wilI sit leve! if the wheels are

properly installed.

Wheel

4. Clean and dry underside of

air tank Ieg opposite wheels.

Remove the protective strip from

the adhesive backed molded

foot bumpers. Attach the foot

bumpers to the bottom of Ieg

on each end. Press firmly into

place.

Molded Foot

A09706 10-ENG

Autres manuels pour 919.167243

Table des matières

Langues :

Autres manuels Craftsman Compresseur d'air

Craftsman

Craftsman 919.167610 Manuel utilisateur

Craftsman

Craftsman 919.16644 Manuel utilisateur

Craftsman

Craftsman 919.165190 Manuel utilisateur

Craftsman

Craftsman 919.165280 Manuel utilisateur

Craftsman

Craftsman 16923 Manuel utilisateur

Craftsman

Craftsman 919.152120 Manuel utilisateur

Craftsman

Craftsman 919.724571 Manuel utilisateur

Craftsman

Craftsman 919.152160 Manuel utilisateur

Craftsman

Craftsman 919.195414 Manuel utilisateur

Craftsman

Craftsman 919.727350 Manuel utilisateur

Craftsman

Craftsman 919.167551 Manuel utilisateur

Craftsman

Craftsman 919.184193 Manuel utilisateur

Craftsman

Craftsman 919.165380 Manuel utilisateur

Craftsman

Craftsman 919.165520 Manuel utilisateur

Craftsman

Craftsman 919.165612 Manuel utilisateur

Craftsman

Craftsman 919.176980 Manuel utilisateur

Craftsman

Craftsman 919.184192 Manuel utilisateur

Craftsman

Craftsman 919.167783 Manuel utilisateur

Craftsman

Craftsman 919.167460 Manuel utilisateur

Craftsman

Craftsman 919.152145 Manuel utilisateur

Craftsman

Craftsman 919.167802 Manuel utilisateur

Craftsman

Craftsman 919.155730 Manuel utilisateur

Craftsman

Craftsman 921.16472 Manuel utilisateur

Craftsman

Craftsman 919.167240 Manuel utilisateur

Manuels Compresseur d'air populaires d'autres marques

Sparmax

Sparmax DC-25XR Manuel utilisateur

KAESER

KAESER M122 Manuel utilisateur

GMC

GMC GAC1500 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton Air Compressor Manuel utilisateur

Fini

Fini F3GST2TK Manuel utilisateur

Industrial Air

Industrial Air CP1580325 Manuel de programmation

Campbell Hausfeld

Campbell Hausfeld RP3300 Guide de démarrage rapide

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuel utilisateur

Hitachi

Hitachi EC99S Manuel de l'opérateur

Parkside

Parkside PKO 270 A1 Manuel utilisateur

Sullair

Sullair 185 Manuel utilisateur

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuel utilisateur

Ferm

Ferm CRM1046 Manuel utilisateur

BE AC153 Manuel utilisateur

RIDGID

RIDGID OF25150A Manuel utilisateur

Johnson Controls

Johnson Controls QUANTUM LX Manuel

Sears

Sears Craftsman 919.167463 Manuel utilisateur

Ring Automotive

Ring Automotive RAC700 Manuel utilisateur