Craftsman 486.245452 Manuel utilisateur

Owner's Manual

CRRFrSMRH°

ELECT IC ASSIST KiT

MODEL NO. 486.245452

For Sleeve Hitch Models

486.24535, 486.24536, 486.24586 & 475 76 50=01

DO NOT RETURN TO STORE

For Missing Parts or Assembly

Questions Call 1-866-576-8388

CAUTION:

Before using this product, read

this manual and follow all Safety

Rules and Operating Instructions.

Safety

Assembly

Operation

Maintenance

Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com/craftsman

PRINTED IN U.S.A. FORM NO. 42551 (04/05/12)

SAFETY RULES .......................................................... 2

FULL SIZE HARDWARE CHART ................................ 3

CARTON CONTENTS ................................................. 4

ASSEMBLY .................................................................. 4

OPERATION ................................................................ 6

MAINTENANCE .......................................................... 6

REPAIR PARTS ILLUSTRATION ................................ 7

REPAIR PARTS LIST ................................................... 7

PARTS ORDERING/SERVICE ..................... Back Page

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. A

defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com

This warranty is void if this product is ever used while providing commercial services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

DO NOT RETURN TO STORE for Missing Parts or Assembly Questions

Call 1-866-576-8388 Attachment Hotline

Any power equipment can cause injury if operated improperly or ifthe user does not understand how to operate the equipment.

Exercise caution at all times, when using power equipment.

• Read this owners manual and your vehicle and

sleeve hitch owners manuals before using this

electric assist kit with the sleeve hitch.

Do not allow children to operate vehicle or sleeve

hitch.

Do not allow adults to operate the vehicle or sleeve

hitch without proper instructions.

Keep all nuts and bolts tight and be sure the

equipment is in safe operating condition.

Look for this symbol to point out important safety precautions. It means--Attention!! Become

alert!! Your safety is involved.

The model number and serial numbers will be found on a

decal attached to the frame.

You should record both the serial number and the date of

purchase and keep in a safe place for future reference.

MODEL NUMBER:

SERIAL NUMBER:

DATE OF PURCHASE:

486.245452

_jA B

C/E

\\\\\

KEY

QTY.

DESCRIPTION

Hex Bolt, 1/2" x 2-3/4"

Hex Bolt, 3/8" x 1"

Hex Lock Nut, 1/2"

Hex Nylock Nut, 3/8"

KEY

QTY.

DESCRIPTION

Flat Washer, 1/2"

Clevis Pin, 1/2" x 2"

Hair Cotter Pin, 3/32"

CARTON CONTENTS

Mount Bracket Assembly

Switch with Wiring

Linear Actuator

TOOLS REQUIRED FOR ASSEMBLY

(2) 9/16" Wrenches or Adjustable Wrenches

(2) 3/4" Wrenches or Adjustable Wrenches

PREPARING THE SLEEVE HITCH

• Remove the bolt and nut that attach the lift link to the

sleeve hitch frame. Remove the handle and the pivot

brackets from the sleeve hitch frame. See figure 1.

ATTACHING THE ELECTRIC ASSIST KIT

• Attach the mount bracket assembly to the sleeve

hitch frame using four 3/8" x 1" hex bolts and 3/8"

nylock hex nuts. See figure 2.

SLEEVE HITCH FRAME

318"x 1" \

HEX BOLT 3/8" NYLOCK NUT

MOUNT

BRACKET

ASSEMBLY

FIGURE 2

486.24535 SLEEVE HITCH

REMOVE PIVOT

BRACKETS

LIFT LINK

REMOVE

BOLT AND NUT

FIGURE 1

•iMPORTANT: Connect to a 12 volt power source only.

Insert the 1/2" x 2-3/4" hex bolt into the lower shaft of

the actuator and then screw a 1/2" hex lock nut as far

as possible onto the bolt. See figure 3.

Place up to five 1/2" flat washers between the anchor

brackets on the lift assembly and insert the end of

the 1/2" x 2-3/4" hex bolt through the anchor brackets

and the washers. Screw a second 1/2" hex lock nut

onto the bolt so that it is flush with the end of the bolt.

Screw the first nut back against the anchor brackets

and tighten both nuts securely. See figure 3.

1/2" FLAT

WASHERS

1/2" HEX

LOCK NUT

1/2" X 2-3/4"

HEX BOLT

HEX

LOCK NUT

To connect the switch to the tractor battery, attach

the terminal on the red wire (with fuse) to the positive

post of the battery and the terminal on the black wire

to the negative post of the battery.

Route the flexible conduit to the rear of the tractor

avoiding hot engine parts, moving parts and pinch

points. Connect the plug on the conduit wires to the

plug on the actuator wires.

On some tractors the switch can be permanently

attached to the tractor dash. If the battery is located

under the hood and you wish to attach the switch to

the tractor dash:

a. Determine if there is a location that provides

adequate clearance to mount the switch inside the

dash. Drill a 1/2" hole in that location. Do not drill

a hole larger than 1/2".

b. Remove the hex nut from the actuator switch

and then screw the round nut to about the mid-

point on the threads.

c. Insert the switch into the hole you drilled in the

tractor's dash and secure it with the hex nut you

removed from the switch.

FIGURE 3

Place the other end of the actuator between the

anchor brackets on the mount bracket assembly.

Insert the 1/2" x 2" clevis pin through the anchor

brackets, securing it with the 3/32" hair cotter pin. See

figure 4.

1/2" X 2" CLEVIS PIN

3/32" HAIR COTTER PIN

FIGURE 4

Keepclearofthelinearacutator,thesleevehitchand

theattachedimplementwhenraisingandlowering.

Thelinearactuatorisequippedwithasafetyclutch.

Whentheactuatorreachestheendofit'sstrokethe

clutchwillslipandmakealoudclickingsound.

• Cleanoffaftereachuse.

Storeinadrylocation.

PARTS FOR MODEL 486.245452 ELECTRIC ASSIST KiT

REF

PART NO

42549

64941

43343

HA23505

43001

HA21362

QTY

REF

Linear Actuator 7

Mount Bracket Assembly 8

Hair Cotter Pin, 3/32" x 2-5/16" 9

Clevis Pin, 1/2" x 2" 10

Hex Bolt, 3/8-16 x 1"

PART NO QTY

43262 2 Hex Lock Nut, 1/2-13

1540-59 5 Flat Washer

43510 1 Hex Bolt, 1/2-13 x 2-3/4"

42550 1 Switch with Fuse

42551 1 Owners Manual

Ny!ock Nut, 3/8:1

To order replacement parts, call Sears Parts Direct 1-800-252-1698

or go to www.searspartsdirect.com

Table des matières

Autres manuels Craftsman Accessoires

Craftsman

Craftsman 572.530331 Manuel utilisateur

Craftsman

Craftsman 486.24218 Manuel utilisateur

Craftsman

Craftsman 316.792420 Manuel utilisateur

Craftsman

Craftsman 486.24635 Manuel utilisateur

Craftsman

Craftsman 358.792442 Manuel utilisateur

Craftsman

Craftsman 358.792443 Manuel utilisateur

Craftsman

Craftsman 351.264271 Manuel utilisateur

Craftsman

Craftsman 509347 Manuel utilisateur

Craftsman

Craftsman 358.792450 Manuel utilisateur

Craftsman

Craftsman 358.792401 Manuel utilisateur

Craftsman

Craftsman SP6721 Instructions d'utilisation

Craftsman

Craftsman 315.175320 Manuel utilisateur

Craftsman

Craftsman FRONT BUMPER 486.245981 Manuel utilisateur

Craftsman

Craftsman BACKWALL WITH METAL PEGBOARD Manuel utilisateur

Craftsman

Craftsman 486.246212 Manuel utilisateur

Craftsman

Craftsman 358.792440 Manuel utilisateur

Craftsman

Craftsman 351.240870 Manuel utilisateur

Craftsman

Craftsman 944.511573 Manuel utilisateur

Craftsman

Craftsman ASF 486.246213 Manuel utilisateur

Craftsman

Craftsman 214.50145 Manuel utilisateur

Craftsman

Craftsman 706.101330 Manuel utilisateur

Craftsman

Craftsman 390.2519 Manuel utilisateur

Craftsman

Craftsman 875.59750 Manuel utilisateur

Craftsman

Craftsman 358.792430 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur