Clarke PC108 Instructions de montage

OPERATING & SAFETY

INSTRUCTIONS GC04/14

HEATING TORCH SETS

Models; PC108, PC109, PCSF109, PC216, PKP411,

PS555, PS560 & PLK1074

Part Nos: 3404115, 3404100, 3404105, 3404110, 3404125, 3404000,

3404005 & 3404135

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Heating Torch Set, designed for trade

use. They are all to be used only with propane gas and are supplied with a

standard 3/8”BSP (LH) hose.

Before attempting to use the product, it is essential that you read this manual

thoroughly and carefully follow all instructions given. In doing so you will

ensure the safety of yourself and that of others around you, and you can also

look forward to the product giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

1. ALWAYS follow all precautions regarding the use of Propane gas cylinders.

(see manufacturers/suppliers instructions)

2. Ensure the gas hose is in perfect condition before use. If in doubt, have it

replaced.

3. Ensure all connections are fully secure before use.

4. Never transport the gas bottle by holding the regulator or gas hose.

5. NEVER point the torch at any person or animal.

6. Take great care when placing the torch down. Do not allow it to come

into contact with flammable surfaces, or any surface which could be

damaged by heat. Use the stand supplied with the PLK1074 to support the

nozzles clear of any supporting surface.

7. Never use the torch in an explosive atmosphere, or where there is danger

of fire.

8. IMPORTANT! If used indoors, ensure there is adequate ventilation.

Please keep these instructions in a safe place for future reference.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

ASSEMBLY

NOTE: A bottle of propane gas is required for use with this equipment, capable of

delivering a pressure of 4 bar. (A regulator is provided)

1. Turn the knob on the regulator fully clockwise, then attach the

regulator to the gas bottle, ensuring it is tight.

2. Attach the hose supplied, to the regulator at one end, and the torch at

the other, noting that the hose connections have LEFT HAND THREADS, i.e.

turn them anticlockwise.

3. Attach the appropriate nozzle/burner to the torch where necessary.

If a nozzle/burner is already attached, remove it carefully, complete with

adapter (see illustration below). Unscrew the nozzle from the adapter and

replace with that of the desired type or size. Screw the adapter with nozzle

back on to the torch.

Note:

1. Model PKP411 requires the torch extension to be attached to the torch.

OPERATION

With the hose and regulator attached, and ensuring the gas tap on the torch

is closed, i.e. turned fully clockwise, open the gas regulator valve.

Gas will now be available at the torch, the volume of which will depend

upon the regulator valve opening.

Very gently, open the gas valve on the torch, ensuring the nozzle/burner is

pointing well away from people or property, and apply a flame to the end of

the burner. Model PKP411 is equipped with a piezo electric starter on the

torch extension. Press the button until ignition occurs. Adjust the gas valve

until the desired flame is achieved.

Some models have a control lever attached to the torch. This is used to

further regulate the gas flow and hence the intensity of the flame. When the

lever is released the flame will reduce to a pilot light.

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

In the case of the PC109 kit, the flame can also be adjusted by positioning

the clip-on sleeve provided, over the air holes in the circumferance of the

17mm screw-tipped nozzle.

Models PC216,

PKP411 and

PLK1074 have

a support arm

which can be

clamped to

the nozzle

extension to

steady the unit

at rest. This

should be

fitted to ensure the flame points upwards, away from any supporting surface.

MAINTENANCE

The torches are maintenance free, except for visual checks before use to

ensure all connections are secure, and the gas hose is in perfect condition. If

the nozzle becomes sooted, clean with a soft wire brush. DO NOT poke wire

etc, through the holes in the nozzle.

To remove the filter from the nozzle for cleaning, grasp the nozzle with a pair

of mole grips or very carefully secure in a vice, then unscrew the filter.

The parts on the following pages are all available from your CLARKE dealer.

COMPONENT PARTS

PLK 1074

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

PC 108

PC 109

PCSF 109

PC 216

Sleeve may be used to

adjust air mix by covering

holes as necessary to

produce desired flame.

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

PKP 411

PS 555

PS 560

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

SPARE PARTS LIST

feR noitpircseD oNtraP feR noitpircseD oNtraP

1ylbmessAeldnaH10901CFDI12renruBepiP12901FSCFDI

2yssAreggirT/eldnaH20114KFDI22renruBtalF22901FSCFDI

3yssAbo

nKlortnoC30901CFDI32rotpadAnorIgniredloS 32101KFDI

4mm08noisnetxE40901CFDI42norIgniredloS42101KFDI

5mm011noisnet

xE50801CFDI52ntxehtiwrenruBepiP52555SFDI

6mm053noisnetxE60612CFDI62ntxehtiwmm41elzzoN62555SFDI

7)tik(mm01noisnetx

E70065SFDI72ntxehtiwmm22elzzoN72555SFDI

8)tik(mm062noisnetxE80065SFDI82wen(rotalugeRsaG

)*elyts

*82555SFDI

9)P(mm

006noisnetxE90114PKFDI92pmalC92114PKFDI

01mm0051esoH01901CFDI03)elbaccni(retingIozeiP 03114PKFDI

11mm0002esoH1155

5SFDI13revoCnoisnetxE 13114PKFDI

21mm000,01esoH21612CFDI23dnatStroppuS 23114KFDI

31mm9elzzoN31901CFDI33hcnerWnepO3

3114KFDI

41mm21elzzoN41901CFDI4371tifoteveelslateM

elzzonpit-wercsmm

53meti

43901CFDI

51mm51elzzoN51901CFDI53elzzo

NpiTwercSmm7153901CFDI

61mm52elzzoN61801CFDI63mm0005esoH634701KLPFDI

71mm43elzzoN71801CFDI73renruBmm06niwT734701KL

PFDI

81mm84elzzoN81801CFDI83mm005noisnetxE834701KLPFDI

91mm85elzzoN91612CFDI93noitceSkroF934701KLPFDI

02mm06obruTel

zzoN02114PKFDI

ENVIRONMENTAL PROTECTION

Do not dispose of this product or its packaging with general

household waste. All tools, accessories and packaging contain

valuable raw materials and should be sorted, taken to a recycling

centre and disposed of appropriately.

Autres manuels pour PC108

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Outils

Clarke

Clarke METALWORKER CMSSCS Manuel utilisateur

Clarke

Clarke CMFT250 Mode d’emploi

Clarke

Clarke GWH8 Mode d’emploi

Clarke

Clarke Metalworker CPTN1 Mode d’emploi

Clarke

Clarke SBR305 Mode d’emploi

Clarke

Clarke CAT29B Manuel d'installation et d'exploitation

Clarke

Clarke CHT204 Manuel utilisateur

Clarke

Clarke CHT878 Manuel utilisateur

Clarke

Clarke CAT138 Manuel d'installation et d'exploitation

Clarke

Clarke CONTRACTOR CHJ110 Mode d’emploi

Clarke

Clarke CAT151 Manuel d'installation et d'exploitation

Clarke

Clarke CHT877 Manuel utilisateur

Clarke

Clarke X-PRO CAT170 Manuel d'installation et d'exploitation

Clarke

Clarke CHT 454 Manuel utilisateur

Clarke

Clarke X-PRO CAT208 Manuel d'installation et d'exploitation

Clarke

Clarke CAT66 Manuel utilisateur

Clarke

Clarke IT1500 Mode d’emploi

Clarke

Clarke Strong-Arm CFB600 Manuel utilisateur

Clarke

Clarke CMFT220 Mode d’emploi

Clarke

Clarke SBR760 Mode d’emploi

Clarke

Clarke CAT125 Manuel d'installation et d'exploitation

Clarke

Clarke KIT1100 Mode d’emploi

Clarke

Clarke CONTRACTOR CWJ700 Mode d’emploi

Clarke

Clarke CHT691 Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser