Clarke FP18 Manuel utilisateur

USER INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC0219 ISS 2

FRUIT PRESS

MODEL NO: FP18

PART NO: 3500327

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE product.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

ASSEMBLY AND USE

1 Trunnion

2 Pressure Plate

3 Threaded Centre Rod

4 Wooden Blocks (2 x Pairs)

5 Collar

6 Screw

7 Steel Band

8 Cage Slat

9 Base

10 Handle

11 Nylon Washer

12 Mesh Sack (Not Shown)

Before building up the press

components, the threaded central

rod must be fitted to the base. A

suitable spanner or an adjustable wrench will be required for this.

The legs should be bolted or screwed to a firm, solid base, using the holes in

the feet. (bolts not supplied)

Put the mesh sack, containing the fruit, into the cage and hanging over the

sides. Press down the fruit by hand. Harder fruits - apples, pears etc., should be

cut into small pieces and ideally crushed using a mallet or shredder before

placing in the sack.

Place the collars (5) on top of the fruit, ensuring they are central within the

cage, then add the wooden blocks (4), (if there is sufficient room) followed by

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

the pressure plate (2) on top of these, as shown in the illustration. Place a

container beneath the outlet spout in the base (9) ready to collect the juice.

Screw on the trunnion (1) and rotate the handle (10) to press the fruit down

into the cage. Never use an extension bar on the handle. The second pair of

blocks provided may be inserted when space allows, to force the collar as

near the base of the press as possible. If the blocks (4) were not used for the

first pressing, unscrew the trunnion, sufficient for more blocks to be inserted,

then screw down again.

After use, the complete press must be thoroughly washed in a mild detergent,

rinsed in clean water and dried.

If left unused for prolonged periods, coat all metal components with a thin film

of vegetable oil and store in a clean, dry environment. Check the press’s

condition before using again and wash thoroughly, rinse, dry and apply a film

of fresh vegetable oil to its metal components.

PRODUCT HYGIENE

IMPORTANT: Before use, ALL components must be scrupulously clean and

any traces of old oil removed to avoid the possibility of contamination of

the produce. Rinse thoroughly in clean water.

ENVIRONMENTAL PROTECTION

Do not dispose of this product with general household waste at the end of its

life. This product contains valuable raw materials and should be disposed of

appropriately at a recognised disposal facility.

SPARE PARTS

If required, spare parts are available from your Clarke dealer.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Outils électriques

Clarke

Clarke CAT82B Manuel

Clarke

Clarke CHG2000C Manuel utilisateur

Clarke

Clarke Metalworker CDP350V Manuel d'installation et d'exploitation

Clarke

Clarke CTILG 5060287 Instructions d'installation

Clarke

Clarke RI150LI Mode d’emploi

Clarke

Clarke CAT50 Manuel d'installation et d'exploitation

Clarke

Clarke PRO236 Manuel d'installation et d'exploitation

Clarke

Clarke Woodworker CBM1-C Manuel d'installation et d'exploitation

Clarke

Clarke STRONG-ARM CSA12F Mode d’emploi

Clarke

Clarke DU8 Manuel utilisateur

Clarke

Clarke CTC150 Mode d’emploi

Clarke

Clarke X-Pro CAT199 Manuel d'installation et d'exploitation

Clarke

Clarke CCRT266 Mode d’emploi

Clarke

Clarke Strong-Arm CSA30FPB Mode d’emploi

Clarke

Clarke CDP10B Manuel d'installation et d'exploitation

Clarke

Clarke MetalWorker CDP151B Manuel d'installation et d'exploitation

Clarke

Clarke CSB34 Mode d’emploi

Clarke

Clarke Strong-Arm ARBOR PRESS Series Manuel utilisateur

Clarke

Clarke CCT48 Mode d’emploi

Clarke

Clarke METALWAORKER CDP502F Mode d’emploi

Clarke

Clarke CDP152B Mode d’emploi

Clarke

Clarke Air CAT232 Manuel d'installation et d'exploitation

Clarke

Clarke COEBS1 Mode d’emploi

Clarke

Clarke CPSB100 Mode d’emploi

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel