Cisco WAP351 Mode d’emploi

Reboot and Reset Factory Default Settings on

the WAP351

Objective

Rebooting a device is used to shut down and restart the device with a saved configuration.

The factory default is used to restore the factory default configuration on the device to

remove any previous configurations.

The objective of this document is to show you how to reboot your WAP351 device and reset

it to the factory default.

Applicable Devices

• WAP351

Software Version

• 1.0.0.39

Reset to Factory Default

There are two ways to reset the Access Point to the factory default configuration:

• Hardware reset

• Reset with the use of the web configuration utility

Hardware Reset

Step 1. Press and hold the Reset button located at the back of the device for approximately

ten seconds with a pin.

The Access Point reloads and is set to the default configuration settings.

Step 2. Login with the default credentials. The default username is cisco, and the default

password is cisco.

Reset with the use of the Web Configuration Utility

Step 1. Log into the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reset the device, click the Reboot To Factory Default button.

A Confirm page appears:

Step 3. Click OK.

A Progress Bar appears:

Step 4. After the reboot is completed, login with the default credentials. The default

username is cisco, and the default password is cisco.

Rebooting the Device

There are two ways to reboot the Access Point:

• Hardware reboot

• Reboot with the use of the web configuration utility

Hardware Reboot

Step 1. Press the Power button to turn off the device. After 10 seconds have passed, press

the Power button a second time to power the device back on.

The Access Point reboots.

Reboot with the use of the Web-based utility

Step 1. Log in to the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reboot the device, click the Reboot button.

A Confirm page appears:

Step 3. Click OK to continue with reboot.

A Progress Bar appears:

Step 4. The Login Page appears. Login with the saved administration credentials.

Autres manuels pour WAP351

1

Table des matières

Autres manuels Cisco Point d'accès sans fil

Cisco

Cisco Catalyst 9130 Manuel utilisateur

Cisco

Cisco 500 Series Manuel de l'opérateur

Cisco

Cisco WAP125 Manuel utilisateur

Cisco

Cisco Meraki MR78 Manuel utilisateur

Cisco

Cisco Small Business AP541N Mode d’emploi

Cisco

Cisco AIR-AP1010 - 1000 Series Lightweight Access... Manuel utilisateur

Cisco

Cisco Aironet Wave 2 Manuel d'installation

Cisco

Cisco 1552S Manuel utilisateur

Cisco

Cisco Meraki MR42 Manuel utilisateur

Cisco

Cisco Meraki MR45 Manuel utilisateur

Cisco

Cisco CISCO673-RF - 673 Router Manuel utilisateur

Cisco

Cisco WAP2000 Manuel utilisateur

Cisco

Cisco Meraki GR60 Manuel utilisateur

Cisco

Cisco Aironet 2600 Series Manuel utilisateur

Cisco

Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN... Manuel

Cisco

Cisco Aironet 1240AG Series Manuel

Cisco

Cisco AIR-AP1131G-A-K9 Manuel utilisateur

Cisco

Cisco AIR-AP1572IC Manuel

Cisco

Cisco Aironet 1300 Series Manuel

Cisco

Cisco WAP131 Manuel utilisateur

Cisco

Cisco Aironet 1530 Series, 1532 Manuel utilisateur

Cisco

Cisco Linksys WET610N Manuel utilisateur

Cisco

Cisco Cisco Aironet Wireless LAN Client Manuel utilisateur

Cisco

Cisco 1700 series Manuel

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur