Cisco 9645 Manuel utilisateur

Overview

This guide provides phone operating instructions and feature descriptions for the Cisco IP Phone multiline

model 6945. The Cisco IP Phone 6945 has four lines.

•Physical Description of Cisco Unified IP Phone 6945, page 1

Physical Description of Cisco Unified IP Phone 6945

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

OL-24413-01 1

DescriptionName

Functions as traditional handset and indicates an incoming call (flashing

red) or new voice message (steady red).

Handset with indicator

light

Displays information such as incoming/outgoing call status, directories,

line status, phone configuration options, and soft key tabs. Also, shows

dedicated phone line labels.

LCD screen2

Depending on configuration, programmable buttons provide access to:Line buttons3

• Phone lines and intercom lines (line buttons)

•Speed-dial numbers (speed-dial buttons, including the BLF speed-dial

features)

• Call features (for example, a Privacy button)

Buttons light to indicate status:

• Green, steady: Active call, answering call or two-way intercom call

• Green, flashing: Held call

• Amber, steady: Privacy in use, one-way intercom call, or DND active

• Amber, flashing: Incoming call or reverting call

• Red, steady: Remote line in use or parked

• Red, flashing: Remote line on hold

Depending on how your system administrator sets up the phone, enable soft

key options displayed on your phone screen.

Soft key buttons4

Transfers active calls to another extension.Transfer button5

Initiates a conference call.Conference button6

Places the call on hold.Hold button7

The navigation pad allows you to scroll up and down on the LCD screen.

Allows you to scroll through menus, highlight items, and display speed

Navigation Pad and Select

(center) button

dials list if you press down when the phone is on-hook. Display phone

numbers from your Placed Calls if you press up when the phone is on-hook.

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

2OL-24413-01

Overview

Physical Description of Cisco Unified IP Phone 6945

DescriptionName

Toggles headset on and off. When the headset is on, the button is lit.Headset button9

Toggles speaker on and off. When the speakerphone is on, the button is lit.Speaker button10

Functions as traditional telephone keypad.Dial pad11

Toggles mute on and off.Mute button12

Increases or decreases handset, headset, ringer, or speakerphone volume.Volume button13

Provides access to message (voice mail) system.Messages button14

Provides access to phone settings such as call history, user preferences,

phone configuration (including administration settings, device configuration,

Application button15

network configuration, and other common configurations), and phone model

information.

Provides access to phone directories.Contacts button16

Phone handset.Handset17

Phone Screen

Displays date, time, and directory number.Header1

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

OL-24413-01 3

Overview

Phone Screen

Displays text label and icon for phone or intercom line, speed-dial

numbers, or services, depending on your configuration.

Line text label with icon2

During a call, displays details for the primary line. If not on a call,

displays line text label and other information such as placed calls,

speed dials, and phone menu listings.

Primary line details and other

phone information

Displays line label and call details for the secondary line and other

phone information such as placed calls, speed dials, and phone

menu listings.

Secondary line details and other

phone information

Displays soft keys for available features or actions.Soft key labels5

Phone Connections

This section shows and describes the connectors on your Cisco Unified IP Phone 6945.

Access port (10/100 PC) for connecting your phone

to your computer

5DC adapter port (DC48V) for phones not

provided with inline power

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

4OL-24413-01

Overview

Phone Connections

Auxiliary port6AC-to-DC power supply (optional)2

Handset connection7AC power cord (optional)3

Analog headset connection (optional)8Network port (10/100 SW) for connecting

to the network

Footstand

If your phone is placed on a table or desk, the footstand can be connected to the back of the phone for a higher

or lower viewing angle, depending on your preference.

Footstand slots for a lower viewing angle2Footstand slots for a higher viewing angle1

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

OL-24413-01 5

Overview

Footstand

Higher Viewing Angle

Lower Viewing Angle

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

6OL-24413-01

Overview

Higher Viewing Angle

Adjusting the Handset Rest

You can adjust the handset rest of a wall-mounted phone so that the receiver does not slip out of the cradle.

Procedure

Step 1 Set the handset aside and pull the square plastic tab from the handset rest.

Step 2 Rotate the tab halfway (180 degrees).

Step 3 Hold the tab between two fingers, with the small notches (in the corners) facing you.

Step 4 Make sure the tab lines up evenly with the slot in the cradle.

Step 5 Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the

handset to the handset rest.

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

OL-24413-01 7

Overview

Adjusting the Handset Rest

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

8OL-24413-01

Overview

Adjusting the Handset Rest

Table des matières

Autres manuels Cisco Téléphone IP

Cisco

Cisco 7941G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 7925G - Unified Wireless IP Phone VoIP Manuel utilisateur

Cisco

Cisco 8865 Manuel utilisateur

Cisco

Cisco 7821/41 Manuel utilisateur

Cisco

Cisco 7821 Comment utiliser

Cisco

Cisco 7931G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 7945 Series Manuel utilisateur

Cisco

Cisco 7970 Series Manuel utilisateur

Cisco

Cisco Cisco 7960 Manuel utilisateur

Cisco

Cisco 8831 Guide de référence rapide

Cisco

Cisco Cisco 7940 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Cisco

Cisco 6945 Series Manuel utilisateur

Cisco

Cisco 7965G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco Small Business Pro SPA 504G Manuel utilisateur

Cisco

Cisco 8861 Manuel utilisateur

Cisco

Cisco 7975G - Unified IP Phone VoIP Manuel

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Mode d’emploi

Cisco

Cisco SPA 508G Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Cisco

Cisco 7942G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco Small Business SPA525G2 Manuel utilisateur

Cisco

Cisco 7821 Manuel utilisateur

Cisco

Cisco 8841 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur