Cisco NCS 1010 Manuel utilisateur

Prepare to Install Cisco NCS 1010

This chapter explains how to prepare for the Cisco NCS 1010 installation.

•Package Contents, on page 1

•Unpack and Verify Cisco NCS 1010, on page 2

Package Contents

You can order Cisco NCS 1010 as assembled chassis (NCS1010-SYS) or as empty chassis (NCS1010-SA)

along with the components. See PIDs for all PIDs of the NCS 1010 components.

The shipped package contains the following:

• Cisco NCS chassis.

• Accessory kit (NCS1010-ACC-KIT)―Includes all the hardware necessary for the chassis installation

on the 19" rack. You can order the accessory kits for ETSI (NCS1010-ETSI-KIT) and 23" ANSI

(NCS1010-23-KIT) racks as required. The following table describes the contents of the accessory kits.

Table 1: Accessory Kit Contents

ContentsAccessory Kit

This kit has the following items for chassis

installation on a 19" rack:

• Double hole ground lug (1x)

• M5 Pan head screws (2x)

• 12–24 Pan head screws (8x)

• External tooth washers (2x)

• Standoffs (2x)

• Left slide rail (1x)

• Right slide rail (1x)

• Protection cover (1x)

NCS1010-ACC-KIT

Prepare to Install Cisco NCS 1010

ContentsAccessory Kit

This kit has the following items for chassis

installation on an ANSI 23" rack:

• 23" rack to 19" rack adapter

• 12–24 Screws (14x)

NCS1010-23-KIT

This kit has the following items for chassis

installation on an ETSI rack:

• ETSI rack to 19" rack adapter

• M6 screws (8x)

• Ground adapter

NCS1010-ETSI-KIT

• Field replaceable modules such as PSUs, controller, fan trays, air filter, and line card (the variant of line

card that you have ordered).

• AC and DC power cables that you have ordered. See Supported Cables.

Unpack and Verify Cisco NCS 1010

Use this task to unpack and check if all the chassis modules that are required for installation have been shipped.

Procedure

Step 1 When you receive Cisco NCS 1010 equipment at the installation site, open the top of the box.

Step 2 Remove the accessory kits and foam inserts in the box. The box contains Cisco NCS 1010 and other items

that are needed for installation.

Step 3 To remove the chassis from the packaging, grasp the side of the chassis and lift it out of the box.

Use these lifting guidelines to avoid injury to yourself or damage to the equipment:

• Do not lift equipment alone; have another person help you to lift the equipment.

Prepare to Install Cisco NCS 1010

Unpack and Verify Cisco NCS 1010

Figure 1: Lifting Cisco NCS 1010

A fully loaded chassis can weigh as much as 19 kg (42 lb).

• Ensure that your footing is solid; balance the weight of the object between your feet.

• Lift the equipment slowly; never move suddenly or twist your body as you lift.

• Keep your back straight and lift with your legs, not your back. When bending down to lift equipment,

bend at the knees (not at the waist), to reduce the strain on your lower back muscles.

Step 4 Verify the following:

• Cisco NCS 1010 is not damaged. Check for a scratch, bend, discoloration, or deformation on the Cisco

NCS 1010 chassis.

• The modules that are shipped with the chassis or separately are not damaged.

Step 5 If there is any damage to the chassis or the modules, call your Cisco sales engineer for a replacement.

Prepare to Install Cisco NCS 1010

Unpack and Verify Cisco NCS 1010

Prepare to Install Cisco NCS 1010

Unpack and Verify Cisco NCS 1010

Autres manuels pour NCS 1010

Table des matières

Autres manuels Cisco Châssis

Cisco

Cisco ASR 5500 Guide d'installation

Cisco

Cisco NCS 4000 Series Manuel utilisateur

Cisco

Cisco Nexus 7018 Manuel utilisateur

Cisco

Cisco NCS 4016 Manuel utilisateur

Cisco

Cisco C4200 Manuel utilisateur

Cisco

Cisco CRS-1 - Carrier Routing System Router Manuel utilisateur

Cisco

Cisco ASA5500-HW - Hardware Accessory Kit Network... Manuel

Cisco

Cisco TelePresence Server 7010 Mode d’emploi

Cisco

Cisco UCS 5108 Manuel du système

Cisco

Cisco NCS 4000 Series Manuel

Cisco

Cisco cBR Series Manuel utilisateur

Cisco

Cisco CRS-1 - Carrier Routing System Router Manuel technique

Cisco

Cisco Firepower 4100/9300 Manuel utilisateur

Cisco

Cisco UCS 5108 Manuel utilisateur

Cisco

Cisco Nexus 7010 Mode d’emploi

Cisco

Cisco UCS S3260 Manuel utilisateur

Cisco

Cisco ONS 15454 Manuel utilisateur

Cisco

Cisco UCS C4200 Instructions d'installation et d'entretien

Cisco

Cisco Nexus 3000 series Mode d’emploi

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Manuel de service

Cisco

Cisco 6100 Guide de référence

Cisco

Cisco ASR 5000 Manuel utilisateur

Cisco

Cisco cBR Manuel utilisateur

Cisco

Cisco CRS-1 - Carrier Routing System Router Guide de l'utilisateur

Manuels Châssis populaires d'autres marques

Advantech

Advantech IPC-623 Series Manuel utilisateur

IMC Networks

IMC Networks iMcV/18 Manuel utilisateur

Chenbro

Chenbro RB13804N4WFT Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR665 V3 Manuel utilisateur

Wuntronic

Wuntronic PCI4DRQ Manuel utilisateur

EtherWAN

EtherWAN EMC400 Manuel utilisateur

Overland Storage

Overland Storage SnapSAN S1000 Mode d’emploi

Philips

Philips LC4.1E A Manuel utilisateur

Supermicro

Supermicro SCF418 Series Manuel utilisateur

Chenbro

Chenbro RM437 Series Manuel utilisateur

Pickering

Pickering 40-914 Manuel utilisateur

HP A7503-S Instructions de montage

Supermicro

Supermicro SC823MTQ-R700LPB Manuel utilisateur

SilverStone

SilverStone RMS08 Series Manuel utilisateur

NI cRIO-FRC II Manuel utilisateur

Pickering

Pickering 65-200 Manuel utilisateur

Allied Telesis

Allied Telesis AT-MMCR18 Manuel utilisateur

Hisense

Hisense MSD6586 Manuel utilisateur