Christie Vivid Red Mode d’emploi

When the lamp reaches the end of its service life, the image will become

darker and colors lose their richness. When the lamp has been operating for

1400 hours or longer, the lamp status LED indicator will flash green, and the

message "The lamp is reaching its limits. Please replace the lamp as soon as

possible" will be displayed on the screen. Even though the lamp may still be

working, replace the lamp to maintain optimal projector performance. When

the lamp has been operated for 1500 hours, the message " LAMP

EXPIRED!!" will be shown on the screen, replace the lamp immediately.

DO NOT TOUCH THE LAMP immediately after it has been used. It will be

extremely hot. Allow the fan to finish its cooling process, then turn the

projector off, and disconnect the power cord. Allow at least for

the lamp to cool down before handling.

DO NOT REMOVE ANY SCREWS except the lamp cover screw and two

lamp housing screws. Removing other screws could result in electric

shock to the user.

If continuing to use the lamp after the replacing lamp message has been

displayed on screen, the lamp bulb may shatter, and pieces of glass

may scatter inside the projector and out into the room. Do not touch

them as the pieces of glass may cause injury. If this happens, contact

your dealer for lamp replacement.

one hour

CAUTION

VIVID Red

Lamp Replacement Instructions

To Replace the Lamp:

To Reset the Lamp Timer:

1. Loosen the lamp cover screw and remove the lamp cover.

2. Loosen the two screws securing the lamp housing. Remove the lamp

housing by pulling on the handle.

3. Insert a new lamp housing until it is plugged into the socket.

4. Secure it in place with the two screws.

5. Re-attach the lamp cover.

6. Tighten the lamp cover screw.

7. Reset the lamp timer.

1. Press Left button, Menu button, and Up button within one second on the

control keypad or remote control to enter engineering menu as shown:

2. Go to lamp reset sub-menu and move the cursor to Reset option. Press

Right button to select.

3. Lamp timer will reset to 0 hour usage.

There are two air filter sponges in the bottom of the Vivid Red projector to

capture dust or dirt and should be replaced whenever the lamp module is

replaced. The temperature will rise and the lamp will fail to light when the air

filters inside of the projector become dirty and clogged. Replacement will be

required more often if the projector is used in the a particularly dusty

environment.

Replacing the

Air Filter

1. Unplug the power cord from the socket.

2. Remove the small filter holder and

unscrew the big air filter screw.

3. Detach the air filters.

4. Replace the air filters.

5. Install the air filters.

6. Re-install the filter covers.

Table des matières

Autres manuels Christie Projecteur

Christie

Christie Matrix 3500 Manuel utilisateur

Christie

Christie Lcd projector Manuel utilisateur

Christie

Christie Boxer 30 Manuel d'utilisation et d'entretien

Christie

Christie 38-VIV306-01 Manuel utilisateur

Christie

Christie LW751i Document technique

Christie

Christie L2K1500 Manuel utilisateur

Christie

Christie H Series Manuel utilisateur

Christie

Christie Vivid LX33 Manuel utilisateur

Christie

Christie GS Series Manuel utilisateur

Christie

Christie DWX555-GS Manuel utilisateur

Christie

Christie Vista S5 Manuel utilisateur

Christie

Christie Mirage SST Instructions de montage

Christie

Christie DWU951 Manuel utilisateur

Christie

Christie DS Series Manuel utilisateur

Christie

Christie 103-011100-01 Manuel utilisateur

Christie

Christie CP2000-M Manuel d'installation et d'exploitation

Christie

Christie P35GPSZ-MT Manuel utilisateur

Christie

Christie Roadie 25K Manuel utilisateur

Christie

Christie LX505 Manuel utilisateur

Christie

Christie Roadster S+ Manuel utilisateur

Christie

Christie G Series Guide de l'utilisateur

Christie

Christie Q Series Manuel utilisateur

Christie

Christie LW502 Manuel utilisateur

Christie

Christie LX400 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur