Christie DS Series Manuel utilisateur

DS Series

LWU1200-DS

User’s Manual (detailed)

Firmware upgrade of the projector

020-001901-01

LWU1200-DS

User's Manual - Firmware upgrade of the projector 020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

Firmware update of the projector

The update le may be published on our website to add functions or x defects.

The following is how to update the projector rmware by yourself.

Our website: http://www.christiedigital.com

►Follow the procedure for updating the rmware. Follow the instructions. When

the instructions are not followed, the projector may not start up correctly. Update

the rmware at your own responsibility.

• Never turn off the projector during the update. When the projector is

unexpectedly turned off, disconnect the power cord and allow the projector to

cool down sufciently. After the projector has sufciently cooled down, turn on

the projector again and start the rmware update again from the beginning.

• Never remove the USB storage device while using it for the update.

• When updating the rmware by using the Web Control screen, make sure that

the network is not disconnected during the update. Wireless LAN is more likely

to be disconnected than wired LAN. Wired connection is recommended.

• Updating cannot be cancelled after starting it.

• Firmware cannot be back to the old version.

• The network function of the projector cannot be used during the update.

• HTTP is used for uploading the update le. Conrm with a network

administrator that there is no restriction of the le uploading.

CAUTION

The network function does not work properly after the update

1. Connect the power cord and turn on the projector, after pulling out the power

cord and leaving the projector for more than one minute.

2. Conrm the network setting of the projector after waiting more than two minutes.

Some of the settings may return to the default after the rmware update.

3. When the projector does not work properly and there is no problem in the

network settings, please contact your dealer.

LWU1200-DS

User's Manual - Firmware upgrade of the projector 020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

Firmware update of the projector

1 Preparation

It is necessary to get an update le from our website.

The applicable update le can be selected from "Firmware Version" and "Model

Name" of the projector on our website.

Conrm "Model Name" and "Firmware Version", and download the update le.

1.1 Conrming the "Model Name" and "Firmware Version"

1. There are two conrmation methods.

• Select OPTION - SERVICE - FIRMWARE UPDATE in ADVANCED MENU of

the projector.

(The following is an example.)

Model Name LWU1200-DS

Firmware Version PRJ_LWU1200-DS_V0100

• Select Firmware Update from Main Menu in the Projector Web Control.

(The following is an example.)

Model Name LWU1200-DS

Firmware Version PRJ_LWU1200-DS_V0100

2. Take a note of the content of “Model Name” and “Firmware Version”.

1.2 Downloading the update le

Use a computer that can be connected to the Internet, and download the update

le from our website. For more information, please check our website.

NOTE • Do not change the name of an update le. The update may not be

performed correctly.

When the same update les are downloaded, subscripts may be added.

Make sure to use the le without subscripts.

(good example) PRJ_LWU1200-DS_V0100

(bad example) PRJ_LWU1200-DS_V0100(1)

LWU1200-DS

User's Manual - Firmware upgrade of the projector 020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

Firmware update of the projector

2 Update

There are two ways of update: "update using a USB storage device" and "update

using the Web Control via network connection".

Each method is as follows.

2.1 Update by using the USB storage device

○ Necessary equipment

USB storage device

• USB2.0 compliant

• Memory capacity 32GB or less (100MB or more space is required)

• FAT16 and FAT32 format are supported.

○Update procedure

1. Make a folder in a USB storage device to save an update le.

Create a "PRJ" folder using single-byte uppercase letters in the root directory of

a USB storage device.

[USB storage device] ----

►Make sure to save the update le as follows. If the update le is not saved

correctly, the projector cannot recognize it.

• Create "PRJ" folder in the root directory of a USB storage device.

• Name a folder using single-byte uppercase letters.

• Save only one update le of the model you want to update in “PRJ” folder.

If plural les are saved in this folder, the projector may not recognize the

update le correctly.

CAUTION

PRJ

2. Save the downloaded le in “PRJ” folder made in step 1.

3. Turn on the projector and the light source.

4. Insert the USB storage device to the projector after waiting at least two minutes.

Do not connect two or more USB storage devices.

5. Select OPTION - SERVICE - FIRMWARE UPDATE in ADVANCED MENU

of the projector.

File saved in the "PRJ" folder in the USB storage device is displayed. Make

sure that the le name is correct.

When the le name is not displayed, conrm step 1.

LWU1200-DS

User's Manual - Firmware upgrade of the projector 020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

Firmware update of the projector

6. When you perform the update, select “YES”.

7. The update is completed in about a few minutes, and the projector restarts

automatically.

The following message is displayed after rmware update has completed

normally.

The projector will automatically turn off the light source to reect the updated

rmware in the operation. After the light source is turned off for a short time, the

light source is automatically turned on again.

After the light source is turned on, conrm the rmware version in OPTION -

SERVICE - FIRMWARE UPDATE in ADVANCED menu.

LWU1200-DS

User's Manual - Firmware upgrade of the projector 020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

2.2 Update by Web Control via the network connection

○Necessary equipment

Computer that can be connected to a wired or wireless network by Web Control

• Use a browser which operation has been con rmed.

For more information, please check our website.

• Prepare a LAN cable or a router necessary for connection.

○Update procedure

1. Copy the downloaded update  le to the computer that can connect to the Web

Control.

2. Turn on the projector.

3. Select Firmware Update from Main Menu after connecting to Web Control.

Select the update  le saved in Computer by using the [Browse...] button.

When an appropriate  le is selected, the [Update Firmware] button gets ready

to be clicked.

4. Click the [Update Firmware] button to update.

Firmware update of the projector

5. The update is completed in about a few or several minutes (it depends on  le

transfer speed), and the projector restarts automatically.

Con rm the  rmware version in the Projector Web Control - Main Menu -

Firmware Update after the restart has been completed.

LWU1200-DS

User's Manual - Firmware upgrade of the projector 020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

Firmware update of the projector

NOTE • Do not operate the browser during the rmware update.

• The update may not be performed correctly if the device you are using goes

to sleep mode during the rmware update.

• The projector cannot be controlled or its settings cannot be changed from the

web screen during the rmware update.

• The rmware can also be updated by using a USB storage device. The update

by Web Control cannot be performed during the update by using a USB storage

device.

• The rmware update cannot be executed when STANDBY MODE in the

SETUP menu is set to NETWORK-WOL and the projector is in standby mode

(light source is not turned on).

Set STANDBY MODE to NORMAL or QUICK START, or turn on the power and

make sure the light source is on to execute the update.

•

The rmware update cannot be executed when the shutter function of the

projector is on. Please execute the rmware update with the shutter function off.

Corporateofﬁces Worldwide ofﬁces

Christie Digital SystemsUSA,Inc.

ph: 714 236 8610

ChristieDigitalSystemsCanadaInc.

ph: 519 744 8005

Africa

ph:+27(0)11 510 0094

Australia

ph:+61(0)73624 4888

Brazil

ph:+55(11)2548 4753

China (Beijing)

ph:+86 10 6561 0240

China (Shanghai)

ph:+86 21 6030 0500

Columbia

ph:+57(318)447 3179

Gemany

ph:+49(0) 221 99512 0

India

ph:+91(080)67089999

Japan(Tokyo)

ph:81 33599 7481

Korea(Seoul)

ph:+82 2702 1601

Mexico

Ph:+52 55 4744 1790

Singapore

Ph:+65 6877 8737

Spain

Ph:+34 91 633 9990

Middle East

Ph:+971(0)503 6800

United Kingdom

Ph:+44(0)118 9778000

United States (Arizona)

ph: 602 943 5700

Independant sales

consultant ofﬁces

Italy

ph: +39 (0) 2 9902 1161

Russia

ph: +36 (0) 1 47 48 100

For the most current technical documentation, visit www.christiedigital.com.

Autres manuels pour DS Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Christie Projecteur

Christie

Christie Roadster S+12K Mode d’emploi

Christie

Christie 4K10-HS Instructions de montage

Christie

Christie VIVID 38-VIV205-01 Manuel utilisateur

Christie

Christie DWU951 Manuel utilisateur

Christie

Christie 599 GS Series Manuel d'utilisation et d'entretien

Christie

Christie DS Series Manuel utilisateur

Christie

Christie Solaria One Manuel utilisateur

Christie

Christie CP2309-RGB Instructions de montage

Christie

Christie Vivid LX41 Manuel utilisateur

Christie

Christie LX501 Manuel utilisateur

Christie

Christie DWU851 Manuel utilisateur

Christie

Christie RoadRunner LX100 Manuel utilisateur

Christie

Christie CP4220 Manuel utilisateur

Christie

Christie LX700 Manuel utilisateur

Christie

Christie DS+750 Manuel utilisateur

Christie

Christie DS+5K Manuel utilisateur

Christie

Christie LX37 Manuel utilisateur

Christie

Christie Mirage 10000 Manuel utilisateur

Christie

Christie HS 2K Series Manuel utilisateur

Christie

Christie E Series Manuel utilisateur

Christie

Christie LX650 Manuel utilisateur

Christie

Christie LX380 Manuel utilisateur

Christie

Christie GraphXMASTER DLV1400-DX Manuel utilisateur

Christie

Christie CP2000-M Manuel d'installation et d'exploitation

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur