CAS SW-1S Series Manuel utilisateur
2
3
CONTENTS
PRECAUTIONS.................................................. 4
PREFACE ............................................................... 6
NAMES AND FUNCTIONS.......................... 6
ASSEMBLY METHOD (SW-1W ONLY) .... 7
OPERATIONS...................................................... 8
1. Simple Weighing Mode ..................................... 8
2. Weighing with Tare............................................ 8
3. Changing Unit of Weight .................................. 9
4. Auto-Power Off Function ............................... 10
BATTERY MAINTENACE..........................11
ERROR MESSAGE..........................................11
SPECIFICATIONS .......................................... 12
4
PRECAUTIONS
5
PRECAUTIONS
6
PREFACE
Thank you for purchasing CAS SW-1S/1N/1W series.
These series have been designed with CAS reliability, under rigid quality control and with
outstanding performance. Your specialty departments can enjoy these high quality reliable
CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the SW-1S/1N/1W series.
Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
DISPLAY & KEYBOARD
■SW-1S/1N/1W
7
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to convert the unit of weight.
Used to turn on and off the scale.
ASSEMBLY METHOD (SW-1W ONLY)
1
2
3
4
5
8
OPERATIONS
■Turn on the display by pressing key. Then, the display will show all the segments and
count up "0" to "9". You may stop this automatic counting by pressing the key.
■When you turn on the display, make sure that platter is empty. Otherwise, display will
show "Err 1", an error of initial zero range. Please refer to "ERROR MESSAGE" section
for more information on page 11.
■When the weight becomes stable the display shows the stable sign ( ○) on.
■You may need to make it "0.000" by pressing key unless the display indicate "0.000"
under the empty platter.
1. Simple Weighing Mode
①Place a commodity on
the platter. ②Remove the commodity
from the platter.
2. Weighing with Tare
■TARE means the weight of container being used for a commodity.
■TARE key function is to subtract the weight of the container from full weight loaded.
①Place a container on
the platter. ②Press the key. ③Place a commodity into
the container, then the
display will show only the
weight of the commodity.
9
④Remove container and
commodity, then the display
will show the weight of the
container with "-" symbol.
⑤Press the key, then
display will show the
"0.000".
3. Changing Unit of Weight ( lb, oz, kg , g)
■Press the UNIT key in the simple weighing mode.
You may select g, kg, lb, oz as the unit of weight.(SW-1S Unit conversion only)
■Press the UNIT key in the simple weighing mode.
You may select g, oz(Fraction), kg, lb, oz(Decimal) as the unit of weight.(SW-1N only)
①Press the UNIT key, then
display will show the
“oz(Decimal)” mode.
②Press the UNIT key, then
display will show the “g” mode.
③Press the UNIT key, then
display will show the
“oz(Fraction)” mode.
④Press the UNIT key, then
display will show the
“kg” mode
10
4. Auto-Power Off Function
Auto-Power off function is to automatically power off as time is set.
This function is helpful to save battery, which is not in use.
The following is the setting procedure of Auto-power off.
①When the scale is turned
off press key, holding
key. Then you will see the
"AP-10".(If you have set this
before, display will show
previous value.)
②Press the key until the
display shows the "AP-x0"
that you wish to take.
(Refer to TABLE 1.)
③Press the key, and
then the scale saves what
you programmed and shows
all the segments, counting up
"0" to "9".
TABLE 1.
DISPLAY FUNCTION
AP-00 Thisfunctiondoesnotautomaticallypoweroff.
AP-10 Thisfunctiondoesautomaticallypower offwhen the scale is not in use for 10 minutes.
AP-20 Thisfunctiondoesautomaticallypower offwhen the scale is not in use for 20 minutes.
AP-30 Thisfunctiondoesautomaticallypower offwhen the scale is not in use for 30 minutes.
* "e" value may be various on capacity of product model.
Please refer to "SPECIFICATION" on page 12. For example, a product model
which capacity is 2.000kg has 1g as "e" value
11
BATTERY MAINTENACE
LOW BATTERY WARNING
When the battery is low the display shows the "BATT" sign.
You can replace the battery new one.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
ERROR MESSAGE
Error Message
on Display
Description Solution
"Err 0" The "Err 0" occurs when scale is not stable. Remove unstable
facts.
"Err 1" The "Err 1" occurs when a current zero point has
shifted from the last span calibration. Please call your CAS
dealer.
"Err 3" The "Err 3" is an overload error. Please remove the
weight.
"Err 9"
The "Err 9" is no weight error. When scale is in
counting mode, you must load the weight.
If you have no weight on your scale, you can see
this error message.
Please load the
weight on your tray.
Autres manuels pour SW-1S Series
5
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels CAS Échelle
CAS
CAS PW-II Manuel utilisateur
CAS
CAS CL5500 Series Manuel utilisateur
CAS
CAS AP Plus-MX Manuel utilisateur
CAS
CAS ED Series Manuel utilisateur
CAS
CAS RETAIL WEIGHING SOLUTION CT100 Manuel utilisateur
CAS
CAS S2000 Jr. Series Manuel utilisateur
CAS
CAS DL Series Manuel utilisateur
CAS
CAS CL7200 series Manuel utilisateur
CAS
CAS PD-II Manuel utilisateur
CAS
CAS PR-II Manuel utilisateur
CAS
CAS CL5200 Series Manuel utilisateur
CAS
CAS SW-2 Manuel utilisateur
CAS
CAS ER JR series Manuel utilisateur
CAS
CAS LP 1.6 Series Manuel utilisateur
CAS
CAS EC-II Series Manuel utilisateur
CAS
CAS SW-1S Series Manuel utilisateur
CAS
CAS CBL Series Manuel utilisateur
CAS
CAS AD series Manuel utilisateur
CAS
CAS MWP Manuel utilisateur
CAS
CAS PR-II Series Manuel utilisateur
