CAS DL Series Manuel utilisateur

2

3

CONTENTS

PRECAUTIONS................................................4

PREFACE..............................................................6

NAMESAND FUNCTIONS.....................6

INSTALLATIONS...........................................8

OPERATIONS.......................................................9

1. General Weighing.............................................9

2. Weighing withTare........................................10

3. Changing Unit of Weight..............................10

4. HOLD Function..............................................11

5. Comparator Function ...................................11

6.AUTO Power Off Function..........................13

BATTERYMAINTENANCE.................14

ERROR MESSAGE..........................................14

SPECIFICATIONS........................................15

4

5

6

PREFACE

Thank you for purchasing our CAS DL series.

These series have been designed with CAS reliability, under rigid quality control

and with outstanding performance. Your specialty departments can enjoy these

high quality reliable CAS products.

We believe that your needs will be satisfied and you will have reliability.

This manual will help you with proper operation and care of the DL series.

Please keep this handy for future reference.

NAMES AND FUNCTIONS

OVERALL VIEW

7

DISPLAYAND KEYBOARD

■KEY FUNCTIONS

KEYS FUNCTIONS

Used to set the zero point.

Used to input or cancel the weight of tare.

Usedto operate thefollowingsequence on the display.

[WEIGHT][HOLD][WLonor off] [WEIGHT]

Usedto turn onandoffthescale.

8

INSTALLATIONS

1. Insert and fasten the bracket support assembly screws.

2. Connect the load cell wire and power line to head.

3. Insert the support cover into the support.

4. Insert and fasten the screws.

9

OPERATIONS

■Turn on the display by pressing the ON/OFF key. Then the display will show

all the segments and count up "0" to "9". You may stop this automatic counting

by pressing the ZERO key.

■When you turn on the display, make sure that platter is empty.

Otherwise, display will show "Err", an error of initial zero range. Please refer

"ERROR MESSAGE" section for more information on page 16.

■When the weight becomes stable the display shows the stable sign(0) on.

■You may need to make it "0.0" by pressing the ZERO key unless the display

indicate "0.0" under the empty platter.

1. General Weighing

①Placea commodity on

theplatter. ②Remove the commodity

fromthe platter.

10

2. Weighing with Tare

■TARE means the weight of container being used for a commodity.

■TARE key function is to subtract the weight of the container from full weight

loaded.

①Placea container onthe

platter. ②PresstheTARE key. ③Place acommodityintothe

container,then the display

willshowonlythe weightof

thecommodity.

④Removecontainer and

commodity,thenthe display

willshowthe weight ofthe

containerwith "-" symbol.

⑤PresstheTARE key,then

displaywillshowthe "0.0".

3. Changing Unit of Weight (lb, kg)

■Press the MODE key first. Holding it, press the TARE key in the simple

weighing mode. The display shows the "UnIt" shortly and then you may select

lb, kg as the unit of weight.

11

4. HOLD Function

■When the weight is not stable, press the MODE key.

The display shows the “HOLd” and then press ZERO key.

The display will show average weight.

②Thedisplayshowsthe "HOLd".

③PressZEROkey.Then"HOLd"

displayblinkfortwo times.

④PressZERO key. Thenthe

displaywillshowthe average

weight.The average weight

blinkfor two times.

①Whenthe weight is

unstable,pres the MODEkey.

*NOTE : Stable indication(0) will not display in HOLD mode.

⑤Removethe commodityfrom

theplatter.

5. Comparator Function - HI / LOW Limit Setting

①PressTARE key toactivate

thisfunction. The display

shows"WLON".

②PresstheMODE keyuntil

thedisplayshows"WL

OFF"."WL OFF"means

thatcomparator function

isnot activated.

③PressZEROkeyonce to set

upthe low limit. Thedisplay

shows"0.0"and thefirst

numberflashes.

Autres manuels pour DL Series

1

Ce manuel convient aux modèles suivants

3

Table des matières

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur