CAS SW-1S Series Manuel utilisateur
2
3
CONTENTS
PRECAUTIONS.................................................. 4
PREFACE ............................................................... 6
NAMES AND FUNCTIONS.......................... 6
OPERATIONS...................................................... 9
1. Simple Weighing Mode ..................................... 9
2. Weighing with Tare............................................ 9
3. Changing Unit of Weight ................................ 10
4. Hold Function (SW-1S , SW-1W )................. 10
5. Comparator Function (SW-1C only).............11
6. Counting Function (SW-1C only) ................. 12
7. How to Use Print(Option)............................... 14
8. How to Set Auto Power Off ............................ 20
BATTERY MAINTENACE......................... 21
ERROR MESSAGE......................................... 21
SPECIFICATIONS .......................................... 22
4
PRECAUTIONS
5
PRECAUTIONS
6
PREFACE
Thank you for purchasing CAS SW-1S/1C / 1W Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the SW-1S/1C/1W
Series. Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
DISPLAY & KEYBOARD
■SW-1S, SW-1W (HOLD Version)
7
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to make the weight of commodity stable.
This weight is average value.
Used to turn on and off the scale.
■SW-1S, SW-1W (Unit Version, Option)
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to convert the unit of weight.
Used to turn on and off the scale.
8
■SW-1C
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to change the unit of weight, and shown as following sequence
on the display. [Kg] J[WL on or off] J[PCS] J[Kg]
Used to turn on and off the scale.
9
OPERATIONS
■Turn on the scale by pressing key. Then, the display will show all the segments and
count up "0" to "9". You may stop this automatic counting by pressing the key.
■When you turn on the display, make sure that platter is empty. Otherwise, display will show
"Err 1", an error of initial zero range. Please refer to "ERROR MESSAGE" section for
more information on page21.
■When the weight becomes stable the display shows the stable sign ( ○) on.
■You may need to make it "0.000" by pressing key unless the display indicate "0.000"
under the empty platter.
1. Simple Weighing Mode
①Place a commodity on
the platter.
②Remove the commodity
from the platter.
2. Weighing with Tare
■TARE means the weight of container being used for a commodity.
■TARE key function is to subtract the weight of the container from full weight loaded.
Place a container on①
the platter.
②Press the key. ③Place a commodity into
the container, then the
display will show only the
weight of the commodity.
10
④Remove container and
commodity, then the display
will show the weight of the
container with "-" symbol.
⑤Press the key, then
display will show the
"0.000".
3. Changing Unit of Weight (SW-1S,SW-1W,Unit ver. only)
■Press the key in the simple weighing mode.
You may select kg, lb, or oz as the unit of weight.
4. Hold Function (SW-1S,SW-1W,Hold ver. only)
②"HOLD" will be displayed
twice
③Then average value will be
show twice And the "HOLD"
function will be removed
automatically
①When the weight is
unstable, press the key.
11
5. Comparator Function - HI / LOW Limit Setting
(SW-1C only)
①Press the key until
the display shows "WL
OFF". "WL OFF" means
that comparator function
is not activated.
②Press key to activate
this function. The display
shows "WL ON".
③Press key once to set
up the low limit. The display
shows "0.000" and the first
number flashes.
④Press the key to have
number increase. To move
flash to next digit, press
the key.
⑤Press key to set up
HIGH limit. The display shows
"0.000" and you can change
these numbers by pressing
key. If you want to move
to next digit you can go by
pressing key.
⑥If you set up HIGH limit
you can go out by pressing
key, and "WL on"
message on the display.
⑦If you set up HIGH limit and LOW limit incorrectly, "Err" will be shown on the display.
Then you may need to set it up again. For example, LOW LIMIT=2.990 kg and HIGH
LIMIT=1.990 kg this is incorrect setting because HIGH limit is lower than the LOW limit.
When HIGH and LOW limit are set as the same or above maximum capacity it still shows
"Err" message.
Autres manuels pour SW-1S Series
5
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels CAS Échelle
CAS
CAS PD-II Manuel utilisateur
CAS
CAS DL Series Manuel utilisateur
CAS
CAS CL5000 Series Manuel utilisateur
CAS
CAS PR Series Manuel utilisateur
CAS
CAS SW-1S Series Manuel utilisateur
CAS
CAS AP-US Series Manuel utilisateur
CAS
CAS CAU Series Manuel utilisateur
CAS
CAS EB Series Manuel utilisateur
CAS
CAS PR Plus-B Manuel utilisateur
CAS
CAS EB-WS-6 Manuel utilisateur
CAS
CAS CI-1580A Manuel utilisateur
CAS
CAS Poscale Manuel utilisateur
CAS
CAS 25AC Manuel utilisateur
CAS
CAS DB-II Manuel utilisateur
CAS
CAS AD-1 Manuel utilisateur
CAS
CAS MW-II Series Manuel utilisateur
CAS
CAS CT100 Series Manuel utilisateur
CAS
CAS CASTON II Manuel utilisateur
CAS
CAS SW-1S Series Manuel utilisateur
CAS
CAS DB-1H Manuel utilisateur
