CAS DB-1H Manuel utilisateur

9002-DBH-0033-2

2002. 3

DB-1H

Bench Scale

OWNER’S MANUAL

CAS Bldg. # 440-1, Sungnae-Dong,

Kangdong-Gu Seoul Korea

CONTENTS

PRECAUTIONS 4

PREFACE 6

NAMES AND FUNCTIONS 6

INSTALLATIONS 7

OPERATIONS 8

1. General Weighing 8

2. Weighing with Tare 9

ERROR MESSAGES 9

SPECIFICATIONS 10

SPECIFICATIONS FOR CE MARKED PRODUCT 11

Keep the scale away from strong EMI noises may cause incorrect weight

readings.

Do not subject the scale to sudden

temperature changes.

PRECAUTIONS

Place the scale on a flat and stable

surface.

If the scale is not properly

level, please adjust the 4 legs

at the bottom of the scale

(turn legs clockwise or

counterclockwise) so as to

center the bubble of the

leveling gauge inside the

indicated circle (See Fig.)

Do not subject the platter to sudden

shocks. This scale must be installed in a dry

and liquid free environment.

Leveling gauge

Make sure that you plug your scale into the proper power outlet.

Plug into a power outlet 30 minutes before operations.

PREFACE

NAMES AND FUNCTIONS

Thank you for purchasing our CAS DB-1H series scale.

These series have been designed with CAS reliability, under rigid quality control

and with outstanding performance. Your specialty departments can enjoy these

high quality reliable CAS products.

We believe that your needs will be satisfied and you will have reliability.

This manual will help you with proper operation and care of the DB-1H series.

Please keep this handy for future reference.

OVERALL VIEW

DISPLAY

PLATTER

LEVELING GAUGE

SUPPORT

DISPLAY

HEAD KEYBOARD

ADJUSTING BOLT

Max 300kg Min 1kg e=d=50g

NET kg

KEYBOARD

Turn the displays on or off.

Used to correct the zero point.

Used to enter a tare weight.

Used to clear a tare weight.

No function key.

KEYS FUNCTIONS

INSTALLATIONS

1. Insert the power line into the support.

Fasten with bolts and nuts as fig 1. 2. Fix a ground wire with bolt then

arrange the power line and loadcell

line as fig 2.

Power

line

Bushing

Ground wire

Bolt

Nut

Washer Head

Ground wire

Power line

Load cell

wire

fig. 1 fig. 2

3. Insert the support cover into the

support as fig 3. 4. Attach the head to the support.

Insert and fasten stop bolt as fig 4.

Support

Stop bolt

Support

cover

1. General Weighing

Wait until the display becomes zero state.

NET NET

Place the commodity on

the platter. Remove the commodity

from the platter.

NET NET NET

Place the container on the

platter. Press the key. Place the commodity in the

container.

NET NET NET

Remove the commodity

from the platter. Remove the container from

the platter, then you will

see tare weight with “

”.

Press “ ” key.

2. Weighing with Tare

Tare is the weight of container being used for a commodity.

The key subtracts the weight of the container.

ERROR MESSAGES

To help the customer’s understanding, this scale warns the user with proper error

message.

Please refer to the table below.

An error of the initial ZERO range

Failure of returning the normal mode

Failure of the analog module

Failure of the digital module

Condition codes are broken

1.Make sure the platter is empty

2.Make sure there is a platter on the scale

Call your CAS dealer

ERROR REASON SOLUTIONS

Err 1

Err 2

Err 10

Err 11

Err 12

OPERATIONS

When you turn on the power switch, the scale will count “00000” to “99999”.

Then the scale will read “0.00” in the weight display. This is called the ZERO

state. If the scale is not ZERO state though there is nothing on the platter,

press the key.

The display indicates if the scale is at zero or if there is a tare entered into the

scale by way of a and NET lamps.

fig. 3 fig. 4

2. Electrical conditions for LVD (Low Voltage Directive) testing.

Power source: AC 220V ~ 240V 50Hz, 250mA, 10W

Insulation class:

3. Environment Conditions for non-automatic weighing instrument.

This product is intended to be “indoor use”.

Altitude: less 2000m

Temperature range: 10°C 40°C

Maximum RH 80% (31°C), decreasing linearly to 50% RH at 40°C.

Supply voltage fluctuations: 10% of the normal voltage.

Installation category:

Pollution degree:

4. Capacity: 30kg 10g, 60kg 20g, 150kg 50g

5. How to connect the power supply

The power switch is located on the left side of the scale. Make sure that the

power switch is “OFF”.

Plug the scale into AC socket and make sure that the socket’s power is within

the scale’s operating range. Turn the power switch “ON”.

6. The socket-outlet shall be installed near the equipment and shall be easily

accessible.

7. Do not pour water directly on the scale. Use the plastic cleaner to clean your

scale.

8. Changes or modifications not expressly approved by manufacturer for

compliance could void the user’s authority to operate the equipment.

; Above statements can be applied to CE marked product.

SPECIFICATIONS

MODEL

CAPACITY

DISPLAY:

WEIGHT

DISPLAY DESIGNATORS

MAXIMUM TARE

POWER SOURCE

POWER CONSUMPTION

PLATTER SIZE (mm)

PRODUCT SIZE (mm)

Notice: Specifications are subject to change for improvement

without notice.

DB-1H

30kg 5/10g 60kg 10/20g 150kg 20/50g

Vacuum Fluorescent Display

5 DIGIT

and NET

-30.00kg -60.00kg -99.95kg

110/220V, 50/60Hz

APPROX. 10W

530(W) 406(D)

420(W) 635(D) 765(H)

IEC 417. NO. 5032

IEC 417. NO. 5019

ALTERNATING CURRENT

PROTECTIVE CONDUCTOR TERMINAL

SYMBOL PUBLICATION DESCRIPTION

1. Symbol Description

SPECIFICATIONS FOR CE MARKED PRODUCT

Autres manuels pour DB-1H

Table des matières

Autres manuels CAS Échelle

CAS

CAS LP-II Instructions d'installation et d'entretien

CAS

CAS LP-II Instructions d'installation et d'entretien

CAS

CAS LP-1000N Series Manuel utilisateur

CAS

CAS RETAIL WEIGHING SOLUTION CT100 Manuel utilisateur

CAS

CAS MW-II Series Manuel utilisateur

CAS

CAS BF-1255 Manuel utilisateur

CAS

CAS CI-200 Series Manuel utilisateur

CAS

CAS ER Series Manuel utilisateur

CAS

CAS PD-II Manuel utilisateur

CAS

CAS SC Series Manuel utilisateur

CAS

CAS K6 Manuel utilisateur

CAS

CAS ER PLUS SERIES Manuel utilisateur

CAS

CAS HE-13 Manuel utilisateur

CAS

CAS LP-1000 B Manuel utilisateur

CAS

CAS PR-C series Manuel utilisateur

CAS

CAS EC-II Series Manuel utilisateur

CAS

CAS PDS Manuel utilisateur

CAS

CAS SC-05P Manuel utilisateur

CAS

CAS PR-II Series Manuel utilisateur

CAS

CAS AD series Manuel utilisateur

CAS

CAS PD-I Instructions d'utilisation

CAS

CAS PDN Series Manuel utilisateur

CAS

CAS CASTON II Manuel utilisateur

CAS

CAS PD-II Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur