CAS ER Series Manuel utilisateur
ER Series
Price Computing Scale
OWNER’S MANUAL
CONTENTS
PRECAUTIONS 4
PREFACE 6
OVERALL VIEW OF ER SERIES 6
DISPLAY & KEYBOARD 7
OPERATIONS 11
1. Programming mode 11
Chapter 1. Basic Operation 12
Chapter 2. PLU Saving & Calling - up 13
Chapter 3. User's Set-up Mode 16
Chapter 4. Formatting Printing Receipt 20
2. Sales Mode 24
Chapter 5. Basic Operation 25
Chapter 6. Sales Transaction 27
Chapter 7. Discount & Payment 35
Chapter 8. Daily Total Sales Amount 37
ASCII CODE 39
ERROR MESSAGES 40
SPECIFICATION 41
45
PRECAUTIONS WARNING
Precautions when installing the scale. To ensure that you get the most from
your scale,pleasefollowthese instruction. Make sure to plug your scal into the proper power outlet. For maximum
performance,plug into apower outlet30minutes beforethe usage forwarm up.
Do not disassemble the scale.
When any damage or defect occurs,
contact your CAS
authorized dealer
immediately for
proper repair.
Do not overload beyond the maximum
weight limit.
Do not pull the plug by its cord when
unplugging. Damaged cord could cause
electric shock or fire.
To prevent from fire occurring, Do not
place or use the scale near flammable or
corrosive gas.
Avoid placing the scale near heater
or in direct sunlight.
Scale must be grounded to minimize
electricity static. This will minimize
defect or electric shock.
Insert plug firmly to wall outlet to
prevent electric shock. Use proper Adapter. Incorred adapter
could damage the scale.
To reduce electric shock or incorrect
reading, Do not spill water on the scale
or place it in humid condition.
Warning
For consistent and accurate reading,
maintain periodical check by your
CAS authorized dealer.
Avoid sudden shock to the scale.
Internal mechanism could be damaged.
Place the scale on firm and temperature
consistent environment.
Take the battery out when scale is not in
use for long time. Leakage from the
batteries is hazardous.
Keep the scale away from other
electromagnetic generating devices.
This may interfere with accurate
reading.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instruction.
Correct type of battery
Grab on the bottom of the scale when
moving. Do not hold by the platter.
Attention
By adjusting 4 corners of the scale, set
the scale even using the built in scale
leveling indicator.
7
6
PREFACE
OVERALL VIEW
Thank you for the purchasing of CAS ER series.
This series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy with
CAS product. We hope that CAS product meets your needs.
The user manual is designed to guide you to understand product operation and
proper care of product.
DISPLAY & KEYBOARD
LCD TYPE : Front Display
LCD TYPE : Rear Display
STADARD TYPE
POLE TYPE
VFD TYPE : Front Display
VFD TYPE : Rear Display
9
8
KEYBAORD
Table : Symbols on Display
SYMBOLS DESCRIPTION
To adjust zero
Tare on
Backlight on
Low battery warning
LCD TYPE : Front Display
LCD TYPE : Rear Display
VFD TYPE : Front Display
VFD TYPE : Rear Display
To input all of numerical data
Direct PLU keys
To save PLU
To call up PLU
To clear data
To set zero
To set or clear tare value
To turn on & off the scale or backlight (LCD version only)
To make several sales transaction by adding up
To make discount transaction
To multiply the same item when making sales transaction
To check total sales amount or finalize sales transaction
10 11
OPERATIONS
1. Programming Mode
Chapter 1. Basic Operation
a. Turning the scale on / off
b. Turning backlight on / off (a option in LCD version only)
c. Zero function
Chapter 2. PLU Saving & Calling-up
a. Saving unit price on PLU
b. Saving PLU name (option)
c. Calling up PLU
- Indirect PLU
- Direct PLU (M1~M5)
Chapter 3. User's Set-up Mode
a. Auto power-off
b. EL backlight on / off (backlight option in LCD version only)
c. Selecting printer
d. Option setting for daily total sales amount
Chapter 4. Formatting Printing Receipt
a. Using Printer
b. Receipt header setting
c. Receipt currency (unit) setting
d. Receipt date setting
Table : Key Functions
KEYS FUNCTIONS
12 13
Chapter 2. PLU Saving & PLU Calling-up
a. Saving unit price on PLU
This section explains how to save unit price in PLU.
Number of direct PLU may be different on product model.
“C” key is to clear data input.
Number of PLU Range Remarks
PLU 199 1~199
PLU name (option) 28 1~28
“C” key is to input, save a character, and move to next character (or byte).
“ZERO” key is to move previous character (or byte).
“TARE” key is to move next programming menu.
Press numeric key to input unit price you wish
to have. Ex) 1.99 Press “ M” key.
Press numeric key to input a PLU address.
Ex) PLU 10.
Chapter 1. Basic Operation
a. Turning the scale on / off
Press ON/OFF key to turn on. Press ON/OFF key to turn on.
b. Turning the backlight on / off (Option in LCD version only)
Press ON/OFF key again for a few seconds
under the power on. Press ON/OFF key again under the backlight
on.
c. Zero function
Press ZERO key to set zero point when the
weight is unstable.
14 15
c. Calling up a PLU
To call up indirect PLU saved
press appropriate numeric keys (address) and
“M ” key. Ex) PLU 10
To go back to normal weighing mode
press “C” key.
To call up direct PLU saved just
press appropriate direct PLU key. Ex) PLU 2 To go back to normal weighing mode
press “C” key.
“ ”
Press “ M” key to save it.
b. Saving PLU name (option)
If you have “28 PLU name inputting option” you may save the name of PLU
for 1~28.
“C” key is to input, save a character, and move to next character (or byte).
“ZERO” key is to move previous character (or byte).
“TARE” key is to move next programming menu.
Input appropriate ASCII codes to save the PLU
name. Ex) “APPLE” is “4, 1, C, 5, 0, C, 5, 0,
C, 4, C, C, 4, 5, C”
Press TARE key to exit to normal weighing
mode or C key up to maximum 8th byte. Then
automatically exit to normal weighing mode.
17
16
a. Auto power-off
This section explains how to set backlight on & off function and automatic off
function.
Select a option you wish to have by using
“TARE” key. Ex) 30 (minuets)
Options Description Remarks
NO No auto power-off.
10 (minutes) Auto power-off in 10 minutes when no use.
30 (minutes) Auto power-off in 30 minutes when no use.
60 (minutes) Auto power-off in 60 minutes when no use.
Chapter 3. User's Set-up Mode
This section explains how to set up the following functions.
To get into “User’s Set-up Mode” press
ON/OFF key pressing and holding ZERO key.
Functions Options Remarks
1. Auto power-off NO / 10 / 30 / 60
2. EL Backlight On/OFF OFF / ON / 3 / 5 / 10 When backlight option selected
in LCD version only
3. Printer selection NON / Top / EPSON /Dep-50
Press “ZERO” key to save current option and move to next function setting
mode.
Press “TARE” key to move to other next option.
19
18
c. Selecting the printer
This section explains how to select the printer option when you'd like to use the
printer connected to ER series.
Select the printer you’re using with ER by
pressing °”TARE” key. EX) DEP-50
Options Description Remarks
NON No printer in use
TOP Top printer interface
EPSON Epson printer interface
DEP-50 DEP-50 printer interface
b. EL backlight ON/OFF function
(Only when backlight option selected in LCD version)
This section explains how to set backlight on & off function and automatic off
function.
Options Description Remarks
OFF Backlight OFF
ON Backlight ON
3 (Seconds) Automatic backlight-off when not in use for 3 seconds.
5 (Seconds) Automatic backlight-off when not in use for 5 seconds.
10 (Seconds) Automatic backlight-off when not in use for 10 seconds.
Press “ZERO” key to move next function
setting, EL Backlight ON/OFF. Use “TARE” key to select one of backlight
auto power-off option or EL Backlight ON/OFF.
Ex) Select 5 seconds auto power-off option.
Press “ZERO” key to save current option and
move to next function setting.
Autres manuels pour ER Series
1
Table des matières
Autres manuels CAS Échelle
CAS
CAS CASTON II Manuel utilisateur
CAS
CAS 25AC Manuel utilisateur
CAS
CAS CL5000 Series Manuel utilisateur
CAS
CAS PD-I Instructions d'utilisation
CAS
CAS DL-60 Manuel utilisateur
CAS
CAS DB-1H Manuel utilisateur
CAS
CAS PB-II Manuel utilisateur
CAS
CAS SW-1S Series Manuel utilisateur
CAS
CAS ECB Series Manuel utilisateur
CAS
CAS CCB Series Manuel utilisateur
CAS
CAS HS-1 Manuel utilisateur
CAS
CAS CL5000 Series Manuel utilisateur
CAS
CAS EB-WS-6 Manuel utilisateur
CAS
CAS CL5500 Series Manuel utilisateur
CAS
CAS Poscale Manuel utilisateur
CAS
CAS NC-100 Manuel utilisateur
CAS
CAS PR-II Series Manuel utilisateur
CAS
CAS PR Series Manuel utilisateur
CAS
CAS SW-II Series Manuel utilisateur
CAS
CAS PDN Series Manuel utilisateur
