Carrier 33CSPGMR-01 Manuel utilisateur

This unique accessory will allow you to copy stored

information from a thermostat. Then the information

may be loaded into other thermostats, without the

need to manually enter each item.

With the EZ Programmer your options are:

• Copy all data from a thermostat (time, day of

week, time period programming, and advanced

setup information).

• Load just the time and day of week to

a thermostat.

• Load just the time period programming

to a thermostat.

• Load all data to a thermostat (time, day of week,

time period programming, and advanced setup

information).

Page 2

The EZ Programmer has a unique location in its

memory to store data from each thermostat

model that it iscompatible with.

The EZ Programmer will automatically recognize

the thermostat model that it is connected to

and upload the correct data for that model.

The EZ Programmer over writes only the existing

data for the model being downloaded. All

other models' data is untouched.

Examples of how this programmer can be used

include:

•Extract programming data from a thermostat

in the shop and upload it to thermostat(s) in

the field.

• An easy way to make the same program

changes on multiple thermostats at the same

location.

• An easy way to change the time on multiple

units.

Page 3

The accessory connector of the

programmer =s inserted into the

accessory jack.

Accessory release button

Accessory jack located on

thermostat bottom

Accessory connector

The LED will glow green

when connected to a

compatible thermostat

To release the programmer from

the thermostat: press and hold

the accessory release button

on the front panel of the thermostat,

while pressing the release button,

remove the programmer.

Page 4

After the accessory connector

of the programmer is inserted

into the accessory jack of a

compatible thermostat:

OThe LED will flash red a

number of times based

on the model of the

thermostat it recognizes.

Reconnect, if the red/green

LED does not flash at all.

Red/Green LED 1 flash = 33CS400-01

2 flashes = 33CS420-01

3 flashes = 33CS450-01

The LED will turn green when

the programmer is ready to

continue.

_1 The LED will turn red during

operation and back to green

when finished.

CAUTION Do not remove the Ez Programmer from the

_ hermostat while the LED is red. If the LED is

red longer than 3 seconds, remove it from the

thermostat as this is an abnormal condition.

In this case let the programmer sit 5 seconds,

then reconnect and retry the previous operation.

Page 5

ALL

This button, when pressed, will

copy (download) all the stored

data from the connected thermostat

to the programmer. The LED will turn red,

then will turn green when complete.

TIME

PERIOD

CLOCK

ONLY

ALL

This button, when pressed, will

copy (upload) the time period

programming from the programmer

to the connected thermostat.

The LED will turn red, then turn

green when complete.

This button, when pressed, will

copy (upload) the time & day of

week from the programmer to the

connected thermostat.

The LED will turn red, then will

turn green when complete.

See note on page 9.

This button, when pressed, will

copy (upload) all the stored data

from the programmer to the

connected thermostat.

The LED will turn red, then turn green

when complete.

Page 6

To u_01oad All data programming:

ALL

This button, when pressed, will

copy (upload) all the stored data

from the programmer to the

connected thermostat.

The LED of the programmer will turn

red, then turn green when copying is

complete.

To download All data:

This button, when pressed, will

o opy (download) all the stored data

from the connected thermostat to

the programmer.

ALL The LED of the programmer will

tturn red, then turn green when

copying is complete.

Page 7

To u_01oad Time Period programming:

This button, when pressed will

copy (upload) all the time period

data from the programmer to the

connected thermostat.

The LED of the programmer will

turn red, then turn green when

copying is complete.

TIME

PERIOD

Page 8

To u_oload Time & Day of Week:

This button, when pressed, will

copy (upload) the time & day

of the week from the programmer

to the connected thermostat.

The LED of the programmer will

turn red, then turn green when

copying is complete.

Note: If connected to a thermostat

that does not have a clock, the

programmer will not try to transfer

the clock information. In this case

the LED will not flash red.

Page 9

To completely erase all of

the contents of the

programmer and restore

it to its factory default

values, insert a paperclip

into this hole and depress

the small reset switch.

Screw holding the

battery cover.

replace the battery:

Remove the screw holding

the battery cover.

Slide off the battery cover

& replace it with a CR-2032,

or equivalent battery.

The internal clock will

need to be reset after

replacing the battery.

To do this, connect the

programmer to a

compatible thermostat

with a clock and day of

the week display.

Confirm the current day

and time, then press _"

Page t0

Ce manuel convient aux modèles suivants

Autres manuels Carrier Télécommande

Carrier

Carrier OSK102 Manuel utilisateur

Carrier

Carrier WTC-IR-LB Manuel utilisateur

Carrier

Carrier 40 series Manuel utilisateur

Carrier

Carrier NTC Manuel utilisateur

Carrier

Carrier RG10L/BGEF Manuel utilisateur

Carrier

Carrier RG66B3/BGEF Manuel utilisateur

Carrier

Carrier rg05 Manuel utilisateur

Carrier

Carrier RBC-AMS54E-UL Manuel utilisateur

Carrier

Carrier split room air conditioner remote control Manuel utilisateur

Carrier

Carrier RG10L/BGEFU1 Manuel utilisateur

Carrier

Carrier Aquasnap Plus 33AW-RC1 Manuel utilisateur

Carrier

Carrier Infinity SYSTXCCRWF01 Manuel utilisateur

Carrier

Carrier 40RC003603 Manuel utilisateur

Carrier

Carrier 40KMC Manuel utilisateur

Carrier

Carrier RG10A2/BGEF Manuel utilisateur

Carrier

Carrier RG66B3/BGEF Manuel utilisateur

Carrier

Carrier 33TB-AC01 Manuel utilisateur

Carrier

Carrier Cavius 9001 Manuel utilisateur

Carrier

Carrier SYSTEM PILOT 33PILOT-01 Manuel utilisateur

Carrier

Carrier KSACN0101AAA Manuel utilisateur

Carrier

Carrier 40KMC Manuel utilisateur

Carrier

Carrier RG10L1/BGEF Manuel utilisateur

Carrier

Carrier Infrared Remote 2 Manuel utilisateur

Carrier

Carrier RG56V Series Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation