Bushnell 119734C Manuel utilisateur
NINJA CAM
Model#: 119734C 03-15
Instruction Manual
Page Index
Introduction 5
Parts & Controls Guide 6-7
Battery and SD Card Installation 8
About the Setup Menu 9
Using the Setup Menu 9
SETUP MENU REFERENCE TABLE 10-11
Camera Operation 12
Mount the Camera 12
Power on the Camera 12
Test the Coverage Area 13
Secure the Camera 13
Viewing the Photos and Videos 14
Glossary 15
Technical Specications 16
Troubleshooting/FAQ 17-20
4
IMPORTANT NOTE
Congratulations on your purchase of one of the best trail cameras on the
market! Bushnell is very proud of this camera and we are sure you will be
pleased with it as well. We appreciate your business and want to earn your
trust. Please refer to the notes below and the instructions in this manual
to ensure that you are completely satised with this product.
If your Bushnell camera does not seem to be functioning properly
or if you are having photo/video quality issues, please check the
Troubleshooting/FAQ section on pages 17-20.
Problems are often due to something simple that was overlooked, or
require only changing one setting to solve.
If your problem continues after trying the solutions in the
Troubleshooting/FAQ section, please call Bushnell Customer Service
at (800) 423-3537. In Canada, call (800) 361-5702.
Bushnell recommends using 4 Energizer® Lithium AA batteries in this
camera to obtain maximum battery life.
Do Not Mix Old and New Batteries
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
Bushnell recommends using SanDisk® SD and SDHC Cards
(up to 32GB capacity) in this camera.
5
INTRODUCTION
Congratulations on your purchase of the Bushnell® 119734C Bone
Collector™ Ninja Camera. This camera is designed to record animal (or
human) activity in the outdoors with its still image and movie modes
and weatherproof, rugged construction. The 0.8 second trigger speed
captures even the fastest animals in the eld. Your Ninja Cam features a
compact, portable size and an extra long battery life.
Main Features:
• Compact Size (122mm x 100mm x 58mm)
• Long Battery Life (Up to 6 months)
• Trigger Time=<0.8 second
• Automatic IR Filter
• LCD Display
• 20 “Lo-Glow” LEDs
• Adjustable Photo Delay: 5~ 59 second ,1~ 10mins (default 10S)
• Multiple Shot Mode (3 images per trigger)
• 3.0 MP sensor (up to 12 MP image resolution via software interpolation)
• 640*480 (@ 30 fps) Video
• Supports up to 32 GB SD Card
• Date, Time & Moon Phase Imprint
• Auto Exposure
• Auto White Balance
• Power Supply: 4 AA batteries (lithium or alkaline)
• Mounting Socket (1/4”-20) for Standard Tripods
• Weatherproof
• Overwrite (Duty) option (user selectable) allows new photos/videos
to begin replacing oldest les when SD card is at max. storage
capacity, so recording will continue without interruption.
6
Parts and Controls Guide
Front of Camera
IR LED Array Detail
PIR
Indicator
(Setup
Mode
Only
Light
Sensor
Camera
Lens
PIR Motion
Sensor
Tripod
Socket
Padlock
Hole
Infrared
LED Array
7
Control Panel Detail
Parts and Controls Guide
Control Panel
(Front Unlatched & Opened)
Power
Switch
USB Port LCD
Display
SD Card
Slot
Battery
Compartment
8
BATTERY and SD CARD INSTALLATION
The Bushnell 119734C Bone Collector™ Ninja Cam is designed to operate
using 4 AA batteries. We recommend using Lithium (for longest life) or
Alkaline batteries.
NOTE: Always set the power switch to the OFF position when installing or
removing batteries.
Please make sure the batteries are inserted correctly, as indicated inside
the battery compartment. Incorrect voltage or polarity (+/-) will damage
the camera.
Do not mix old and new batteries.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
Memory
Your 119734C Bone Collector Ninja Cam has a memory card slot, to
accept SD cards up to 32GB max. capacity (sold separately).
Inserting an SD card
• Make sure the power switch is in the OFF position whenever adding
or removing memory.
• Insert an SD card into the card slot completely and oriented correctly
as shown by the icon above the slot (label up, contacts facing down
and notched corner on the right).
• To remove the SD memory card, depress the SD card and pull out
the card gently.
Using a new, blank SD card is recommended. If the SD card has been used
in another device, please make sure to format using the Format option
in the Ninja Cam’s Setup menu before you set the camera to capture
photos/videos. New cards are ready to use straight from the package.
9
ABOUT THE SETUP MENU
Slide the power switch to the ON position. You’ll see“WAIT”on the display,
then the setup menu screen. Before you start using the camera, you’ll no
doubt want to set the date/time so they are imprinted correctly on your
photos, and maybe change the trigger delay time and image resolution
to your preferences. This is done by editing the settings of an item listed
in the Setup Menu.
To enter the Setup Menu at any time, press the SETUP button (to left of
the power switch).
USING THE SETUP MENU
The Setup Menu has 6 dierent items (described in detail on pages 10 & 11),
which appear on a list in the left frame of the display. Here’s how to edit
(change) the setting of a menu item:
1. Select the menu item you want to edit by pressing the UP or DOWN
button until the item is blinking. Note: you can see the current/
default setting for each item (without changing it) in the main center
frame as you move up and down the list of items.
2. Press the OK button.
3. You can now select the setting you prefer for the selected item
by pressing the UP or DOWN button. The setting displayed in the
center frame will blink until you press OK to conrm it is the setting
you want to save.
4. To exit the Setup menu at any time, simply press the SETUP button.
SETUP MENU DISPLAY
SELECTED
MENU
ITEM
CURRENT
SETTING OF
SELECTED ITEM
Indicates Photo (1P or 3P) or Movie Mode
Battery Level
10
Menu
Item
Settings
(Bold=default)
Description
Date set year, month,
and day
Press OK and use the UP/DOWN
keys to change the year setting, then
press OK again and repeat these
steps to also set the current month
and day. Press OK after setting the
day to go to the next menu item
(setting Time).
Time set hour and
minute
Press OK and use the UP/DOWN
keys (to change the setting) then OK
again ( to move to the next eld) to
set the current hour (24-hr format
only, “00”=midnight, “12”=noon) and
minute.
Delay set minutes (0-
10) or seconds
(5-59)
Default delay
time= 10 sec.
Selects the length of time that the
camera will “wait” until it responds
to any additional triggers from the
PIR after an animal/human is rst
detected and remains within the
sensor’s range. During this user set
“ignore triggers” interval, the camera
will not capture photos/videos. This
prevents the card from lling up
with too many redundant images.
Settings begin with 10 second
default time. Press OK, set the delay
time in minutes (if desired), press OK
and set the delay in seconds.
The following table lists all of the menu items, their available settings,
and a description of their functions:
Table des matières
Autres manuels Bushnell Caméra de repérage
Bushnell
Bushnell 119908D Manuel utilisateur
Bushnell
Bushnell Trophy Cam 119636C Manuel utilisateur
Bushnell
Bushnell TROPHY CAM HD AGRESSOR 119873C Manuel utilisateur
Bushnell
Bushnell Trophy Cam 119676C Manuel utilisateur
Bushnell
Bushnell Trail Sentry 119302 Manuel utilisateur
Bushnell
Bushnell CORE DS-4K Manuel utilisateur
Bushnell
Bushnell 119438 Manuel utilisateur
Bushnell
Bushnell TROPHY CAM 119626C Manuel utilisateur
Bushnell
Bushnell 119439 Manuel utilisateur
Bushnell
Bushnell TROPHY CAM HD ESSENTIAL 119736C Manuel utilisateur
Bushnell
Bushnell Trophy Cam HD 119676 Manuel utilisateur
Bushnell
Bushnell Trail Scout 11-9600 Manuel utilisateur
Bushnell
Bushnell CELLUCORE 24 Manuel utilisateur
Bushnell
Bushnell Trophy Cam 98-1559 / 1-10 Manuel utilisateur
Bushnell
Bushnell CELLUCORE 20 Manuel utilisateur
Bushnell
Bushnell TROPHY 119598 Manuel utilisateur
Bushnell
Bushnell Trophy Cam 119435 Manuel utilisateur
Bushnell
Bushnell TRAIL SENTRY 119320C Manuel utilisateur
Bushnell
Bushnell TRAIL SENTRY 11-9000 Manuel utilisateur
Bushnell
Bushnell 119437 Manuel utilisateur
