Bushnell Yardage Pro 20-1925 Manuel utilisateur

Model: 20-1925

Lit. #: 98-0738/03-06

CONTENTS

English

Français

Español

Deutsch

Italiano

Português

Your Bushnell®YARDAGE PRO®X500 is a precision instrument designed to provide many years of enjoyment. This

booklet will help you achieve optimum performance by explaining its adjustments and features as well as how to care for

this precise laser rangefinding instrument. To ensure optimal performance and longevity, please read these instructions

before using your YARDAGE PRO X500.

In-View Display

Internal Yards to

Meters Switch Power Button

Objective Lens

Laser Receiver

Battery Compartment

Laser Transmit

ENGLISH

INTRODUCTION

Your Bushnell Yardage Pro X500 is the world’s most simple to use, yet advanced laser rangefinder. Using Digital

Technology and measuring a mere 4.2 x 3.6 x 1.9 inches, the 7.4 ounce Yardage Pro X500 delivers superb and accurate

range performance to +/- one yard. Range to a golf flag as far as 200 yards out, or to a tree 450 yards away for a reference

point. The single button operation allows outdoor enthusiasts to easily measure distance with confidence.

The Yardage Pro X500 emits invisible, eyesafe, infrared energy pulses. Sophisticated digital technology instantaneously

calculates distances by measuring the time it takes for each pulse to travel from the rangefinder, to the target, and

back.

The ranging accuracy of the Yardage Pro X500 is plus or minus one yard / meter under most circumstances. The

maximum range of the instrument depends on the reflectivity of the target. The maximum distance for most objects

is 450 yards / 411 meters while for highly reflective objects the maximum is 999 yards / 914 meters. Note: You will

get both longer and shorter maximum distances depending on the reflective properties of the particular target and the

environmental conditions at the time the distance of an object is being measured.

The color, surface finish, size and shape of the target all affect reflectivity and range. The brighter the color, the longer

the range. Red is highly reflective, for example, and allows longer ranges than the color black, which is the least

reflective color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a

larger target. The angle to the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface

is perpendicular to the flight path of the emitted energy pulses) provides good range while a steep angle on the other

hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of sunlight) will affect the ranging

capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely, very

sunny days will decrease the unit’s maximum range.

OPERATIONAL SUMMARY

While looking through the monocular, depress the power button once to activate the inview

display system (LCD). Aim the Yardage Pro X500 at a target at least 5 yards away, depress

and hold the power button down until range reading is displayed. Release the power button.

Note: Once activated, the Yardage Pro X500’s LCD will remain active and display the last

distance measurement for 30 seconds. You can depress the power button again at any time

to distance to a new target. As with any laser device, it is not recommended to directly view

the emissions for long periods of time with magnified lenses.

FEATURES

Your Yardage Pro X500’s LCD incorporates illuminated indicators that advise you unit of measure, when the laser is

active, the battery charge is low, and when a target has been acquired. A summary of these features is presented below:

UNIT OF MEASURE OPTIONS – The Yardage Pro X500 can be used to measure distances in yards or meters. The

unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, remove

the battery cover slide. Locate the internal yards to meter slide switch. To measure in yards, slide the switch to the “Y”

position. To measure in meters, slide the switch to the “M” position.

ILLUMINATING INDICATORS – Low Battery Charge ( ) When the low battery symbol is displayed in

the upper right-hand portion of the LCD, the battery charge is getting low and the 9-volt alkaline battery should be

replaced.

TARGET ACQUIRED: Informs the user that a distance measurement has been obtained. The message “TARGET

ACQUIRED” will appear in the top portion of the LCD. The distance measured will appear at the bottom of the

LCD in numerical form.

SPECIFICATIONS

OPTICAL DESIGN The Yardage Pro X500 features a Perma Focus monocular optical system for viewing your target.

A liquid crystal display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting,

yards / meters, and low battery indicators. Inherent in the manufacturing process are small black spots that appear in

the optical system. These are a natural characteristic of the LCD and cannot be fully eliminated in the manufacturing

process. They do not affect the distancing performance of the unit.

Dimensions: Pocket Size, measuring 4.2 x 3.6 x 1.9 inches

Weight: 7.4 oz.

Accuracy: +/- 1 yard

Magnification: 4x

Display: LCD (even and odd numbers)

Power Source: 9 volt alkaline battery (user supplied)

FOV: 320 ft. @ 1000 yards

Total Eye Relief: 20mm

Exit Pupil: 4 mm

Single Button Operation

Water resistant

Internal Yards to Meter switch

5-yard minimum, 999 yards to a reflective target, 200 yards to a golf flag, 450 yards to a tree

Includes case and strap

CLEANING

Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or fingerprints, clean

with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the

lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and

photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth

- never directly on the lens.

WARRANTY / REPAIR – TWO-YEAR LIMITED WARRANTY

Your Bushnell®product is warranted to be free of defects in materials and workmanship for two years after the date of

purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that

you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling,

installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return

postage prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell Outdoor Products Bushnell Outdoor Products

Attn.: Repairs Attn.: Repairs

8500 Marshall Drive 25A East Pearce Street, Unit 1

Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty

information. In Europe you may also contact Bushnell at: BUSHNELL Outdoor Products Gmbh

European Service Centre

MORSESTRASSE 4

D- 50769 KÖLN

GERMANY

Tél: +49 (0) 221 709 939 3

Fax: +49 (0) 221 709 939 8

This warranty gives you specific legal rights. You may have other rights which vary from country to country.

Before returning for repair, consult the Trouble Shooting Table.

TROUBLE SHOOTING TABLE

If unit does not turn on - LCD does not illuminate:

• Depress power button.

• Check and if necessary, replace battery.

If unit powers down (display goes blank when attempting to power the laser):

• The battery is either weak or low quality. Replace the battery with a good quality alkaline battery. Heavy Duty

alkaline batteries are NOT recommended.

There is no reset button to clear last range reading before ranging another target:

• The last range reading does not need to be cleared before ranging another target. Simply aim at the new target

using the LCD’s reticle, depress the power button and hold until new range reading is displayed.

If target range cannot be obtained:

• Make sure LCD is illuminated.

• Make sure that the power button is being depressed

• Make sure that nothing, such as your hand or finger, is blocking the objective lenses (lenses closest to the target)

that emit and receive the laser pulses.

• Make sure unit is held steady while depressing power button.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant

to Subpart B of Part 15 of FCC Rules.

Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Bushnell Jumelles

Bushnell

Bushnell 190125 Manuel utilisateur

Bushnell

Bushnell ImageView 98-0917/04-09 Manuel utilisateur

Bushnell

Bushnell Spectator Sport Series Manuel utilisateur

Bushnell

Bushnell ENGAGE X-10x42 Manuel utilisateur

Bushnell

Bushnell H2O 157050R Manuel utilisateur

Bushnell

Bushnell 26-04002.5x42 Manuel utilisateur

Bushnell

Bushnell 62-0001 Guide de démarrage rapide

Bushnell

Bushnell FUSION X Manuel utilisateur

Bushnell

Bushnell 260650 Manuel utilisateur

Bushnell

Bushnell Elite e2 Manuel utilisateur

Bushnell

Bushnell ENGAGE X Manuel utilisateur

Bushnell

Bushnell IMAGE VIEW 111024 Manuel utilisateur

Bushnell

Bushnell ImageView 118322 Manuel utilisateur

Bushnell

Bushnell POWERVIEW 2 Manuel utilisateur

Bushnell

Bushnell Bear Grylls Manuel utilisateur

Bushnell

Bushnell Night Vision 26-3150 Manuel utilisateur

Bushnell

Bushnell ImageView 18-0832 Manuel utilisateur

Bushnell

Bushnell Cabelas 20-3125 Manuel utilisateur

Bushnell

Bushnell ImageView 11-1210 Manuel utilisateur

Bushnell

Bushnell ImageView 111211 Manuel utilisateur

Bushnell

Bushnell ImageView 11-0832 Manuel utilisateur

Bushnell

Bushnell 23-2811 Manuel utilisateur

Bushnell

Bushnell Legend E Series Manuel utilisateur

Bushnell

Bushnell ImageView 18-0832 Manuel utilisateur

Manuels Jumelles populaires d'autres marques

Celestron

Celestron VistaPix 72218 Manuel utilisateur

Levenhuk

Levenhuk Atom Digital DNM200 Manuel utilisateur

ATN

ATN PS-15 Manuel utilisateur

Bresser

Bresser TOPAS 7x50 Manuel utilisateur

Berger & Schroter

Berger & Schroter LN-G3-B50 Manuel utilisateur

Leica

Leica geovid 8x42 HD-R Manuel utilisateur

Noblex

Noblex NF 8 x 42 inception Manuel utilisateur

Newcon Optik

Newcon Optik AN Series Manuel utilisateur

PHOTONIS

PHOTONIS VYPER Manuel utilisateur

ATN

ATN 6015-WPT Manuel utilisateur

Famous Trails

Famous Trails ViewCatcher DCB 822 Manuel utilisateur

AGM

AGM EXPLORATOR FSB50-640 Manuel utilisateur

Opticron

Opticron Marine-3 7x50 BIF.GA Guide d'installation

Kayoba

Kayoba 009129 Manuel utilisateur

Vixen

Vixen ARENA Series Manuel utilisateur

MAGINON

MAGINON NVB 60 Manuel utilisateur

Leica

Leica Geovid 56 Manuel utilisateur

Leica

Leica GEOVID PRO Manuel utilisateur