Burkert 6440 Manuel utilisateur

Type 6440

2/2-way solenoid valve, servo-assisted

Operating Instructions

We reserve the right to make technical changes without notice.

Operating Instructions 2306/00_ENen_ 00815439 / Original DE

Type 6440

Contents

CONTENTS

1 About this document..................................................................................................................................4

1.1 Manufacturer .................................................................................................................................... 4

1.2 Used symbols................................................................................................................................... 4

1.3 Terms and abbreviations .................................................................................................................. 5

2 Safety instructions......................................................................................................................................6

2.1 Intended use..................................................................................................................................... 6

2.2 Safety................................................................................................................................................ 6

3 Product description....................................................................................................................................9

3.1 Product structure.............................................................................................................................. 9

3.2 Type label ....................................................................................................................................... 10

4 Technical data ..........................................................................................................................................11

4.1 Standards and Directives ............................................................................................................... 11

4.2 Operating conditions ...................................................................................................................... 11

4.3 Circuit function ............................................................................................................................... 12

5 Installation ................................................................................................................................................13

5.1 Preparatory work ............................................................................................................................ 13

5.2 Installation of socket variants ......................................................................................................... 13

5.3 Installation of cartridge variants ..................................................................................................... 14

5.4 Flange variant installation ............................................................................................................... 16

5.5 Coil installation ............................................................................................................................... 17

5.6 Cable plug installation .................................................................................................................... 18

6 Electrical connection................................................................................................................................19

6.1 Cable plug Type 2518, plug shape A according to DIN EN175301-803....................................... 19

6.2 Automotive plugs for IP6K9K coil variants ..................................................................................... 20

7 Faults ........................................................................................................................................................21

8 Logistics....................................................................................................................................................22

8.1 Transport and storage .................................................................................................................... 22

8.2 Disposal .......................................................................................................................................... 22

Type 6440

About this document

1 ABOUT THIS DOCUMENT

The document is an important part of the product and guides the user to safe installation and operation.

The information and instructions in this document are binding for the use of the product.

Before using the product for the first time, read and observe the whole safety chapter.

Before starting any work on the product, read and observe the respective sections of the document.

Keep the document available for reference and give it to the next user.

Contact the Bürkert sales office for any questions.

Further information concerning the product at country.burkert.com.

1.1 Manufacturer

Bürkert Fluid Control Systems

Christian-Bürkert-Str. 13−17

D-74653 Ingelfingen

The contact addresses are available at country.burkert.com in the menu Contact.

1.2 Used symbols

DANGER!

Warns of a danger that leads to death or serious injuries.

WARNING!

Warns of a danger that can lead to death or serious injuries.

CAUTION!

Warns of a danger that can lead to minor injuries.

NOTICE!

Warns of property damage that can damage the product or the installation.

Indicates important additional information, tips and recommendations.

Refers to information in this document or in other documents.

Indicates a step to be carried out.

Indicates a result.

Menu Indicates a software user-interface text.

Type 6440

About this document

1.3 Terms and abbreviations

The terms and abbreviations are used in this document to refer to following definitions.

Device 2/2-way solenoid valve; servo-assisted, type 6440

bar Unit for relative pressure

Type 6440

Safety instructions

2 SAFETY INSTRUCTIONS

2.1 Intended use

The device is designed to control the flow rate of media. The permitted media are listed in Technical

data [}11].

Prerequisites for safe and trouble-free operation are correct proper transportation, storage, installation,

start-up, operation and maintenance.

The instructions are part of the device. The device is intended exclusively for use within the scope of these

instructions. Uses of the device that are not described in these instructions, the contractual documents or

the type label can lead to severe personal injury or death, damage to the device or property and dangers for

the surrounding area or the environment.

Do not mechanically load the device.

Only trained and qualified personnel may install, operate and maintain the device. See qualification of

persons in Safety [}6]

Use the device only in conjunction with third-party devices and components recommended and author-

ized by Bürkert.

Use the device only when it is in perfect condition.

2.2 Safety

Qualification of personnel working with the device

Improper use of the device can lead to serious personal injury or death. To avoid accidents when working

with the device, the following minimum requirements must be met:

Carry out work on the device within the scope of these instructions in a safety-compliant manner.

Detect and avoid dangers when working on the device.

Understand the instructions and implement the information contained therein accordingly.

Responsibility of the operator

The operator is responsible for observing the location-specific safety regulations, also in relation to person-

nel.

Observe the general rules of technology.

Install the device according to the regulations applicable in the respective country.

The operator must make hazards arising from the location of the device avoidable by providing appropri-

ate operating instructions.

Only use authorised devices in a potentially explosive atmosphere

There are variants for this device type that may be used in Ex areas. These variants are identified by a sep-

arate Ex type label. The scope of delivery for these variants includes additional instructions identified with

the ATEX logo.

Only use devices that are approved for this type of potentially explosive atmosphere.

Note the information on the separate Ex type label for usage in an Ex area.

Follow the additional instructions identified with the ATEX logo for usage in an Ex area.

Type 6440

Safety instructions

Changes and other modifications, spare parts and accessories

Changes to the device, incorrect installation or use of non-approved devices or components create hazards

that can lead to accidents and injuries.

Do not make any changes to the device.

Do not mechanically load the device.

Observe the operating instructions of the device or component used.

Only use the devices in conjunction with approved devices or components.

Spare parts and accessories that do not meet Bürkert’s requirements may impair the operational safety of

the device and cause accidents.

To ensure operational safety, only use original parts from Bürkert.

Operation only after proper transport, storage, installation, start-up or maintenance.

Improper transport, storage, installation, start-up or maintenance endanger the operational safety of the

device and can cause accidents. This can lead to serious personal injury or death.

Only carry out works which are described in these instructions.

Only carry out works using suitable tools.

Have all other works carried out by Bürkert only.

Technical limit values and media

Non-compliance with technical limit values or unsuitable media can damage the device and lead to leaks.

This can cause accidents and seriously injure or kill people.

Comply with limit values. See Technical data [}11] and information on the type label.

Only feed media into the media ports that are listed in the chapter Technical data [}11].

Observe the safety data sheet for the media used.

Medium under pressure

Medium under pressure can seriously injure people. In the event of overpressure or pressure surges, the

device or lines can burst. Pneumatic lines that are defective or not securely fastened can come loose and

swing around.

Before working on the device or system, switch off the pressure. Vent or empty the lines.

Adhere to the permitted pressure ranges of the medium.

Comply with the permitted temperature ranges of the medium.

Electric shock due to electrical components

Touching live parts can result in severe electric shock. This can lead to serious personal injury or death.

Before working on the device or system, switch off the power supply. Secure it against reactivation.

Observe any applicable accident prevention and safety regulations for electrical devices.

Hot surfaces and fire hazard

The surface of the device can become hot with fast-switching actuators or with hot media.

Wear suitable protective gloves.

Keep highly flammable substances and media away from the device.

Type 6440

Safety instructions

Working on the device

Working on the device that has not been powered down, unauthorised switching on or uncontrolled start-

up of the system can cause accidents. This can lead to serious personal injury or death.

Only work on the device when it is not in use.

Ensure that the device or system cannot be switched on unintentionally.

Only start the process in a controlled manner following disruptions. Observe sequence:

1. Apply supply voltage or pneumatic supply.

2. Charge the device with medium.

Type 6440

Product description

3 PRODUCT DESCRIPTION

Type 6440 is a pilot-operated and compact 2/2-way piston valve with the following properties:

Safe opening via a force pilot operated piston system.

Vibration-proof, screwed coil system

Increased leak proofing through welded core guide tube.

Optimised for use in hydrogen applications, such as fuel cells or electrolysis.

3.1 Product structure

Fig.1: Type 6440 socket variants

1 Coil 2 Valve body

3 Type label 4 Nut for coil attachment

Fig.2: Typ 6440 flange variant FK14/FK17

1 Coil 2 4 M4 screws (variant FK14) or M5 screws

(variant FK17)

3 Valve body 4 Type label

5 Nut for coil attachment

Type 6440

Product description

Fig.3: Type 6440 cartridge variant FC16/FC17

1 Coil 2 2 M6 screws (variant FC16) or 4 M5 screws

(variant FC17)

3 Retaining plate 4 Valve body

5 Type label 6 Nut for coil attachment

3.2 Type label

1 2 3 4 5

14 6

13 7

Fig.4: Type label Type 6440 (example)

1 Type 2 Circuit function

3 Orifice 4 Sealing material

5 Body material 6 Operating pressure

7 Cold power (tolerance ±10%) 8 Ambient temperature

9 CE marking 10 Manufacture code

11 Article number 12 Indication for disposal

13 Operating voltage 14 Port connection

Table des matières

Autres manuels Burkert Unité de contrôle

Burkert

Burkert 3280 Manuel utilisateur

Burkert

Burkert 2301 Series Manuel utilisateur

Burkert

Burkert 0127 Manuel utilisateur

Burkert

Burkert ME44 Manuel utilisateur

Burkert

Burkert 6510 Manuel utilisateur

Burkert

Burkert 2100 series Mode d’emploi

Burkert

Burkert 2101 Manuel utilisateur

Burkert

Burkert 5470 Manuel utilisateur

Burkert

Burkert 6240 Manuel utilisateur

Burkert

Burkert 2301 Series Manuel utilisateur

Burkert

Burkert 2300 Series Manuel utilisateur

Burkert

Burkert 6240 Manuel utilisateur

Burkert

Burkert 8181 Manuel utilisateur

Burkert

Burkert 2012 Manuel utilisateur

Burkert

Burkert 8690 Manuel utilisateur

Burkert

Burkert 0290 Manuel utilisateur

Burkert

Burkert 0340 Manuel utilisateur

Burkert

Burkert PTB 00 ATEX 2202 X Manuel utilisateur

Burkert

Burkert AirLINE 8652 Manuel utilisateur

Burkert

Burkert 3360 Manuel utilisateur

Burkert

Burkert 2651 Manuel utilisateur

Burkert

Burkert 2101 Manuel utilisateur

Burkert

Burkert 2060 Manuel utilisateur

Burkert

Burkert 6022 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur