BOXLIGHT cp-710k Manuel utilisateur
Downloaded From projector-manual.com Boxlight Manuals
1
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference. (2)
This device must accept any interference received, including interference that may
cause undesired operation.
Information to User:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
Shielded interface cable, if any, must be used in order to comply with emission
limits.
Downloaded From projector-manual.com Boxlight Manuals
2
Contents
1、Overview........................................................................................................3
2、Accessories.....................................................................................................4
3、Definitions of Buttons and Indicators ............................................................5
4、Explanation of Indicator Status......................................................................7
5、Setting Up.......................................................................................................9
6、Connecting Projector.....................................................................................11
7、Operating OSD(On Screen Display) Menu...................................................14
8、Maintenance..................................................................................................20
9、Appendix.......................................................................................................21
Downloaded From projector-manual.com Boxlight Manuals
3
Overview
Features
zPortable projector with compact design and light weight：6.8 lbs / 3.1kg.
zExcellent display with high brightness and contrast ratio.
zHighly compatible with various computer and video input signals within a
horizontal frequency range of 15 to 80kHz and a vertical frequency range of 43
to 85kHz. (VGA to SXGA)
zManual zoom control enables user to adjust the screen between 40” (1.33m) to
200”(6.67m).
zVersatile capabilities with vertical keystone correction, freeze, blank and PIP
function
zDigital zoom adjustment providing user with highlight and focus function on
pivotal discussion at a presentation
zHandy remote control with mouse and laser pointer function
Warnings
zThe projector is designed to operate on a power supply of 90～265Vac
50/60Hz. Ensure that your power supply fits this requirement before attempting
to use your projector.
zDo not stare directly into the lens if possible. Eye damage could result.
zThe projector should never be placed near or over a radiator or heat
register
zNever expose the projector to rain or use near water; also, do not spill liquid of
any kind on it.
zDo not cover the ventilation slots and openings. These allow air circulation and
cooling to the projector to protect it from overheating.
zDo not overload wall outlets and extension cords as this can result in fire or
electric shock.
zTo turn off the projector, press Power button to display the message and press
again to turn off. After projector is turned off, cooling fan keeps operating;
during the cooling period, the projector cannot be turned on again.
zTurn off the projector and disconnect power cord if it is not to be used for an
extended period of time.
zDo not attempt to service this projector yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service technicians from your authorized dealer.
zWhen replacement parts are required, make sure the parts are of the same type
from your authorized dealer.
Downloaded From projector-manual.com Boxlight Manuals
4
Accessories
Standard Accessories
Optional Accessories
zLamp
zAir filter
zCarry bag
zRS232 Cable
You can purchase these spare parts from your authorized dealer or service center.
zUser’s Manual zS-Video Cable
zPower Cord zDVI to D-Sub Converter
zVideo Cable (RCA Type) zRCA-PC Audio Cable
zD-Sub 15pin Cable
zRemote Control (with two AA
Batteries)
zPC-PC Audio Cable
zUSB Cable
Downloaded From projector-manual.com Boxlight Manuals
5
Definition of Buttons and Indicators
Remote Control
Buttons and Indicators of Control Panel
Downloaded From projector-manual.com Boxlight Manuals
6
Definition of Button Function
Button Function (In Normal Working Mode)
Power zPress Power button to turn on the projector.
zPress Power button twice to turn off the projector.
Menu zPress Menu button to display OSD menu.
Exit zPress Exit button to close OSD menu.
Source zPress Source button to select input signal with the sequence o
f
VGA, AV, S-Video and DVI.
V Keystone zPress V Keystone and ÎÍbutton to correct keystone distortion.
Volume zUsed to increase and decrease volume
Laser zLaser Pointer
Auto zUsed to operate image quality Auto Adjustment (only for VGA)
L/R zL: Left Click button of the mouse
R: Right Click button of the mouse
Track ball zUsed to move the cursor
Mute zPress Mute button to cut off sound and press again to restore to
the previous level
Blank zPress Blank button to blank out the screen and press again to
restore the image
Freeze zPress Freeze button to freeze image on-screen and press again to
cancel Freeze function
Enlarge
(+/-) zPress Enlarge +/- button to enlarge or reduce the image and press
ÏÐÎ Íbutton to move the image.
P/P zDisplay PIP Quick Menu
Downloaded From projector-manual.com Boxlight Manuals
7
Explanation of Indicator Status
Condition ⊙Fan
(Red)
⊙Ready
(Green)
⊙Lamp
(Orange) Status
Off On Off Standby Mode
Off Off On Normal Working Mode
Normal
Off Flash Alternately Once a Sec. Heat Dissipation
Flash Off On
Fan Error (Stage 1)
Flash Flash Alternately Once a Sec. Fan Error (Stage 2)
Off Off Off No Power
Abnormal
Off Off Flash Lamp Error
Projector in Standby Mode
zWhen pressing Power button on Remote Controller or Control Panel, Ready
indicator is on; the projector is in standby mode and ready to enter the normal
working mode.
Projector in Normal Working Mode
zWhen the projector is entering normal working mode, Ready indicator will
turn off and Lamp indicator will turn on. If no any error happens, it will stay
the same during operation.
Projector in Heat Dissipation Status
zWhen pressing Power button twice on Remote Controller or Control Panel to
turn off the projector, cooling fan will keep operating and for the time being,
Fan indicator is off and Lamp indicator and Ready indicator are flashing
alternately once a second. Before both Lamp and Ready indicators turn off,
the projector cannot be turned on again.
Fan Error
zWhen a fan error is detected during operation (Stage 1), there is an image of
fan warning on the screen and the system will proceed to self-detection. At
this time, Fan indicator keeps flashing, Ready indicator is off and Lamp
indicator is on. If fan error consists continuously after system self-detection,
Downloaded From projector-manual.com Boxlight Manuals
8
Ready and Lamp indicators will flash alternately to enter stage 2; the projector
will turn off automatically and go into heat dissipation status. Please contact
your authorized dealer for fan replacement.
No Power
zMake sure that the power cord is well connected to wall outlet and the switch
is on; if three indicators are still off, Power Supply error might happen. Please
contact your authorized dealer for service.
Lamp Error
zWhen Lamp indicator keeps flashing during operation, there is a problem of
Lamp Error.
zAlso, when a projected image becomes dark or image color turns into
unnatural one, lamp replacement is required.
zFor safety reasons, replace with a lamp module of the same type and order it
through your authorized dealer.
Downloaded From projector-manual.com Boxlight Manuals
9
Setting Up
Location for Operation
zPlace the projector on a level surface and in a dry area free from dust and
moisture.
zOperate the projector on a flat projection surface and in a darkened
environment to provide best image.
zTo install the projector on the ceiling, please contact a qualified technician. Do
not attempt to mount the projector on a ceiling yourself.
Positioning Projector
zEnsure that the projected image is exactly perpendicular to the screen to avoid
image distortion.
zProjection size can be focused from 40” to 200”.
zRefer to the figures below to adjust the size of screen you desire.
Projection Distance / Size Table
Projection Size/inch Project Distance /m Project Distance/m
40” 1.33 1.64
50” 1.67 2.05
60” 2 2.46
100” 3.33 4.1
150” 5 6.15
200” 6.67 8.2
Downloaded From projector-manual.com Boxlight Manuals
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BOXLIGHT Projecteur
BOXLIGHT
BOXLIGHT CP-300t Manuel utilisateur
BOXLIGHT
BOXLIGHT CP-14t Manuel utilisateur
BOXLIGHT
BOXLIGHT MP-385t Manuel utilisateur
BOXLIGHT
BOXLIGHT ProjectoWrite7 P7 WX32N Manuel utilisateur
BOXLIGHT
BOXLIGHT CP-320t Manuel utilisateur
BOXLIGHT
BOXLIGHT CP-310t Manuel utilisateur
BOXLIGHT
BOXLIGHT CP-306t Manuel utilisateur
BOXLIGHT
BOXLIGHT PRO6501DP Manuel utilisateur
BOXLIGHT
BOXLIGHT Seattle X22N Manuel utilisateur
BOXLIGHT
BOXLIGHT ProjectoWrite5 Manuel de programmation
BOXLIGHT
BOXLIGHT CP-300t Manuel utilisateur
BOXLIGHT
BOXLIGHT CP-300t Manuel utilisateur
BOXLIGHT
BOXLIGHT Beacon CP720e Manuel utilisateur
BOXLIGHT
BOXLIGHT 9000-INT Manuel utilisateur
BOXLIGHT
BOXLIGHT ProjectoWrite6 Manuel utilisateur
BOXLIGHT
BOXLIGHT MP-58i Manuel utilisateur
BOXLIGHT
BOXLIGHT MP-650i Manuel utilisateur
BOXLIGHT
BOXLIGHT CP-635i Manuel utilisateur
BOXLIGHT
BOXLIGHT XD-10m Manuel utilisateur
BOXLIGHT
BOXLIGHT Seattle Series Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
