Bose QC25 Manuel utilisateur

BTunes for Bose QC25

User’s manual

Content

■Before use…………………………………………………...…1

1. Overview ....................…………………………………...…….1

2. Charging the BTunes…………………………………………….2

■Getting started…………………….……………………………2

1. Powering on/off the BTunes............................................................2

2. Installation..................... ..............................................................3

3. Pairing /Connecting....................................................................3

1)Pairing the BTunes with Bluetooth cellphone.........……………3

2)Pairingthe BTunes with Bluetooth transmitter.............................4

3)Pairing the BTunes with multi-point devices.............................5

4. Battery display …………..…………………………………….5

5. Making a call..........................................……………………….6

6. Playing music..............................................................................8

7. LED indicator..............................................................................9

8. Factory reset..............................................................................10

■Care and maintenance………….………………………………10

■FAQs…………………………………..……………………….11

■Specifications……………………...………………………......12

Thank you for choosing the BTunes for Bose QC25. Please read this user’s

manual carefully before use.

■Before use

BTunes for Bose QC25 supports streaming CD quality music from your smart

devices, and make phone calls too.

1. Overview

2.5mm audio input jack

MFB Button

Microphone

LED indicator

USB charging jack

Volume down

Volume up

2. Charging the BTunes

When the BTunes need to be charged, it will emits “Battery low” and the red

LEDflashes instead of blue LED. Pleaserecharge the battery of the BTunes.

1) Plug the USB charging cable into the charging jack of a PC or a charger.

2) Plug the end of USB charging cable into the USB port on the BTunes.

RED light on→Charging

RED light off→Finished charging

3)It will take about 1.5 hours to finish charging.

Warning:

The battery is recyclable.

Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat, such as sunshine, fire or the like.

■Getting started

1. Powering on/off the BTunes

Function

Operation

LED indicator

Prompt tone

Power on

Press and hold MFB

button for 2 seconds

Blue LED on

Power on

Power off

Press and hold MFB

button for 3

seconds

Red LED on

Power off

Remarks:

◆The headset will prompt“Battery high”,“Battery medium”, “Battery low”

according to the status of battery.

◆The BTunes will power off automatically to save power if not connected

with devices within limited time.

2. Installation.

1) Plug the BTunes into BOSE QC25 on the left side.

2) Wear the headset according to L/R side.

3. Pairing /Connecting

1) Pairing the BTunes with Bluetooth cellphone

Prior to using the BTunes for the first time, you have to pair it with a

Bluetooth-enabled cellphone.

The general pairing procedures are as follows:

1) Place the BTunes and Bluetooth cellphone within 1 meter;

2) Press and hold MFB button about 7s and release it till red and blue LED

flash alternately, voice prompt “Pairing”.

3) Select “The BTunes QC25/5” from Bluetooth list on your cellphone to

pair/connect. After connected, the Blue LED flash twice every 4s and

prompt “Your device is connected”.

Remarks:

◆Pairing mode will last for 2 minutes, if not paired/connected with devices,

the BTunes will into standby mode.

◆After successful pairing, the BTunes and devices will remember each other,

they will not need to re-pair next time. When the BTunes is powered on, it

will connect to the last connected devices automatically.

◆Short press MFB button once when the BTunes not connected with device,

it will connect to the last connected device.

◆BTunes will disconnected with the devices when it out of effective range,

they can connected automatically backto effective range within 5 minutes;

if not connected, please short press MFB button.

2)Pairing the BTunswith Bluetooth transmitter

You can connect the BTunes with a Bluetooth transmitter to enjoy music

wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included in

accessories) for example. The pairing procedures are as follows:

1)_Keep the BTunes and transmitter within 1

meter ;

2) Make the BTunes enter pairing mode

3) Turn on the Bluetooth transmitter and

make it enter pairing mode. It will search for

Bluetooth devices automatically and send a

pairing request. After successful pairing and

connecting, blue LED of the BTunes flashes

twice every 4 seconds and prompt “Your device is connected”.

Remarks:

◆The pairing password of the BTunes is “0000”. So, the BTunes can only

pair with a Bluetooth transmitter whose pairing password is “0000”.

◆If pairing still fails after several tries, please refer to the Bluetooth

transmitter’s user’s manual for further information.

3）Pairing the BTunes with multi-point devices

The BTunes can connect with two Bluetooth devices at the same time.

The general pairing procedures are as follows:

1)Pairing the BTunes with device one.

2) Turn on the BTunes and make it enter into pairing mode again, and pair with

device two.

3) Operate device one to connect with the BTunes. The BTunes has already

connected with two devices in this moment.

Remark:

1)Power on multi-point:Standby mode or pairing mode,press MFB button and

volume up button simultaneously, release it till blue LED on 1s;

2)Power off multi-point:Standby mode or pairing mode, press MFB button and

volume down button simultaneously,release it till red LED on 1s .

3) To have a good user experience, it is better power off multi-point function if

connecting withonly one device.

4. Battery display

When the BTunes connected with iOS devices or some Android devices, it will

display the battery of the BTunes on the device. When the BTunes battery low,

the power symbol show red.

5. Making a call

1) Basic operation

Functions

Status of headset

Operation

Prompt tone

Cancel a call

Calling

Short press MFB

button once

call

terminated

Answer a call

Ringing

Short press MFB

button once

Answer

Reject a call

Ringing

Press MFB

about 2 seconds

Reject

End a call

During a call

Short press

MFB button

once

Call

terminated

Volume up

During a call

Press volume up

button

No prompt

tone

Volume down

During a call

Press volume

down button

No prompt

tone

Transfer

conversation

to cellphone

During a call

Press MFB

about 2 seconds

Transfer

audio

Transfer

conversation

to headset

During a call

Press MFB

about 2 seconds

Transfer

audio

Microphone

mute

During a call

Double click

MFB button

Mute on

Cancel mute

During a call

(microphone

mute)

Double click

MFB button

Mute off

Active voice

Assistant

Connected mode

or playing music

Double click

MFB button

No prompt

tone

Redial last

number

Connected mode

or playing music

Press MFB and

volume up

button

simultaneously

Last number

redial

Warning:Excessive pressure from earphones and headphones can cause

hearing loss.

Note:

When pressing the answer button on some cell phone, the call will be

transferred to the cell phone. You can switch the call to the BTunes through

transfer conversation or operating on the smart devices. Please refer to your

smart devices user manual for further information.

6.Playing music

Functions

Status of the

headset

Operation

Volume up

Playing music

Press button

Volume

down

Playing music

Press button

Last song

Playing music

Long press button about 2 seconds

Next song

Playing music

Long press button about 2 seconds

Pause

Playing music

Short press MFB once

play

Pausing

Short press MFB once

Table des matières

Autres manuels Bose Casque audio

Bose

Bose SoundSport Manuel utilisateur

Bose

Bose TriPort OE Manuel utilisateur

Bose

Bose SoundLink BH1 Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Bose

Bose TriPort Manuel utilisateur

Bose

Bose SoundTrue Manuel utilisateur

Bose

Bose SoundSport Manuel utilisateur

Bose

Bose QUIETCONTROL 30 Manuel utilisateur

Bose

Bose QuietComfort 3 Manuel utilisateur

Bose

Bose Lifestyle 35 Series II Manuel utilisateur

Bose

Bose SoundLink around-ear wireless headphones II Manuel utilisateur

Bose

Bose OE Audio Manuel utilisateur

Bose

Bose QuietComfort 25 Manuel utilisateur

Bose

Bose SIE2i Sport Manuel utilisateur

Bose

Bose QUIETCOMFORT 35 Manuel utilisateur

Bose

Bose Earbuds 500 Manuel utilisateur

Bose

Bose SoundTrue AE2 Manuel utilisateur

Bose

Bose SoundSport Manuel utilisateur

Bose

Bose OE2 Manuel utilisateur

Bose

Bose QUIETCOMFORT 35 II Manuel utilisateur

Bose

Bose AE2I Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Bose

Bose sleepbuds Mode d'emploi

Bose

Bose QUIETCOMFORT EARBUDS II Manuel utilisateur

Manuels Casque audio populaires d'autres marques

Sony

Sony MDR-NC8 Manuel utilisateur

AUSounds

AUSounds AU-Stream Manuel utilisateur

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuel utilisateur

Philips

Philips SHE3622 Manuel utilisateur

Insignia

Insignia NS-CAHBTSPORT Manuel utilisateur

Movie Vision

Movie Vision HP-400 Manuel utilisateur

MobiFren

MobiFren SM Pro Manuel utilisateur

Motorola solutions

Motorola solutions PMLN8120 Manuel utilisateur

Jaybird

Jaybird freedom Guide d'installation

Sony

Sony MDR-ED12LP Manuel utilisateur

HiFuture

HiFuture Tidy Buds Pro Manuel utilisateur

Creative

Creative CB2530 Manuel utilisateur

Renkforce

Renkforce RF FTVK-100 Manuel utilisateur

Philips

Philips SHQ3000 Manuel utilisateur

Sennheiser

Sennheiser 500371 Manuel utilisateur

Califone

Califone 2924AV Manuel utilisateur

Philips

Philips EARGEAR HE205 Series Manuel utilisateur

Technics

Technics EAH-AZ80 Manuel utilisateur