Bosch GLR225 Instructions de montage

IMPORTANT: IMPORTANT : IMPORTANTE:

Read Before Using Lire avant usage Leer antes de usar

Operating/Safet Instructions

Consignes de fonctionnement/sécurité

Instrucciones de funcionamiento seguridad

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com

Call Toll Free for

Consumer Information

& Service Locations

Pour obtenir des informations

et les adresses de nos centres

de service après-vente,

appelez ce numéro gratuit

Llame gratis para

obtener información

para el consumidor

ubicaciones de servicio

For English Version Version française Versión en español

See page 6 Voir page 25 Ver la página 43

GLR225

-2-

123456

b c d ea

feg

-3-

1.6 ft

-4-

0.8 ft

2.4 ft

-5-

GLR225

DLA001

DLA002

6035961428

2609170085

1609203X36

1 609 203 X48

Rangefinder

-6-

LASER RADIATION. AVOID

DIRECT EYE EXPOSURE. DO NOT stare

into the laser light sour e. Never aim light

at another person or obje t other than the

workpie e. Laser light can damage

your eyes.

Read all instru tions. Failure to follow all

instru tions listed below may result in ele tri

sho k, fire and/or serious injury.

Do not direct the laser beam at persons or animals and do

not stare into the laser beam yourself. This tool produces

laser class 2 laser radiation and complies with 21 CFR

1 4 .1 and 1 4 .11 except for deviations pursuant to

Laser Notice No. 5 , dated June 24, 2 7. This can lead to persons

being blinded.

General Safety Rules

WARNING

Working safely with the

rangefinder is possible only

when the operating and safety

information are read

ompletely and the

instru tions ontained therin

are stri tly followed. Never

make warning labels on the

Rangefinder unre ognizable.

Never aim the beam at a

workpie e with a refle tive

surfa e. Bright shiny reflective

sheet steel or similar reflective

surfaces are not recommended

for laser use. Reflective surfaces

could direct the beam back

toward the operator.

Take are to re ognize the

a ura y and range of the

devi e. Measurement may not

be a urate if used beyond the

rated range of the devi e.

Use of ontrols or adjustments

or performan e of pro edures

other than those spe ified

herein may result in hazardous

radiation exposure.

The use of opti al instruments

with this produ t will in rease

eye hazards.

Have the rangefinder repaired

only through qualified

spe ialist using original spare

parts. This ensures that the

safety of the rangefinder

is maintained.

Do not allow hildren to use

the rangefinder without

supervision. They could

Safety Rules for Rangefinder

WARNING

-7-

unintentionally blind other persons.

Do not point the laser beam at

persons or animals and do not

look into the laser beam

yourself, not even from a

large distan e.

Do not use the laser viewing

glasses as safety goggles. The

laser viewing glasses are used

for improved visualization of the

laser beam, but they do not

protect against laser radiation.

Do not use the laser viewing

glasses as sun glasses or in

traffi . The laser viewing glasses

do not afford complete UV

protection and reduce color

perception.

WARNING: Be sure to read and

understand all instructions in this

manual before using this product.

Failure to follow all instructions

may result in hazardous radiation

exposure, electric shock, fire,

and/or bodily injury.

CAUTION: Use of controls or

adjustments or performance of

procedures other than those

specified in this manual, may result

in hazardous radiation exposure.

CAUTION: The use of optical

instruments with this product will

increase eye hazard.

IMPORTANT: The following

labels are on your rangefinder for

your convenience and safety.

They indicate where the laser

light is emitted by the level.

ALWAYS BE AWARE of their

location when using the level.

ALWAYS: Make sure that any

bystanders in the vicinity of use

are made aware of the dangers

of looking directly into the

rangefinder.

DO NOT remove or deface any

warning or caution labels.

Removing labels increases the risk

of exposure to laser radiation.

DO NOT stare directly at the laser

beam or project the laser beam

directly into the eyes of others.

Serious eye injury could result.

DO NOT place the rangefinder in

a position that may cause anyone

to stare into the laser beam

intentionally or unintentionally.

Serous eye injury could result.

DO NOT use any optical tools

such as, but not limited to,

telescopes or transits to view the

laser beam. Serious eye injury

could result.

ALWAYS remove the batteries

when cleaning the laser light

aperture to laser lens.

DO NOT operate the rangefinder

around children or allow children

to operate the rangefinder.

Serious eye injury could result.

ALWAYS turn the rangefinder

“OFF” when not in use. Leaving

the rangefinder “ON” increases

the risk of someone inadvertently

staring into the laser beam.

Safe Operating Procedures

DO NOT operate the rangefinder

in combustible areas such as in

the presence of flammable

liquids, gases or dust.

ALWAYS position the rangefinder

securely. Damage to the

rangefinder and/or serious injury to

the user could result if the

rangefinder falls.

ALWAYS use only the accessories

that are recommended by the

manufacturer of your rangefinder.

Use of accessories that have been

designed for use with other

rangefinders could result in

serious injury.

DO NOT leave rangefinder “on”

unattended in any operation mode.

ALWAYS repair and servicing

must be performed by a qualified

repair facility. Repairs performed

by unqualified personnel could

result in serious injury.

DO NOT use this rangefinder for

any purpose other than those

outlined in this manual. This

could result in serious injury.

DO NOT disassemble the

rangefinder. There are no user

serviceable parts inside.

Disassembling the laser will void

all warranties on the product. Do

not modify the product in any

way. Modifying the rangefinder

may result in hazardous laser

radiation exposure.

-8-

Recycle raw materials & batteries instead of disposing of waste. The

unit, accessories, packaging & used batteries should be sorted for

environmentally friendly recycling in accordance with the

latest regulations.

WARNING: Batteries can

explode or leak, and can cause

injury or fire. To reduce this risk:

ALWAYS follow all instructions

and warnings on the battery label

and package.

DO NOT short any battery

terminals.

DO NOT charge alkaline batteries.

DO NOT mix old and new

batteries. Replace all of them at

the same time with new batteries

of the same brand and type.

DO NOT mix battery chemistries.

DISPOSE of batteries per local

code.

DO NOT dispose of batteries

in fire.

KEEP batteries out of reach of

children.

REMOVE batteries if the device

will not be used for several months.

Electrical Safety Procedures

Environment Protection

INTENDED USE

The rangefinder is intended for

measuring distances, lengths,

heights, clearances and for

calculating areas and volumes.

The rangefinder is suitable for

interior and exterior construction

site measuring.

PRODUCT FEATURES

The numbering of the product

features shown refers to the

illustration of the rangefinder on

the graphic page.

1 Reference point button

2 Memory retrieve button”M=”

3 Memory add button “M +”

4 MIN., MAX. measurement

button

5 Length, area and volume

measurement

6 Vial level

7 Display

8 Alignment aid

9 Laser warning label

10 Measurement button

11 Indirect measurement and

multi-surface area

measurement button

12 Memory subtraction

button ”M –”

13 Continuous laser

beam/change “unit of

measure” button

14 On/Off/Clear Button ”C”

15 Extension pin

16 Latch of the extension pin

17 1/4” threaded hole for

mounting optional tripod*

18 Latch of battery lid

19 Battery lid

20 Serial number label

21 Laser beam outlet

22 Reception lens

23 Protective case

24 Hand strap

25 Laser viewing glasses*

26 Laser target plate*

27 Hand strap mounting post

DISPLAY ELEMENTS

a Measured values stored

b Battery indication

Problem temperature

indicator

d Measured value/result

e Unit of measure

f Measurement reference point

g Laser switched on

h Individual measured value (for

length measurement: result)

i Measure mode indicators

Length measurement

Area measurement

Volume measurement

Indirect length measurement

Wall surface measurement

Minimum measurement

Maximum measurement

* Optional A essories

-9-

Functional Description

MIN

MAX

Arti le number

Dimensions

Measuring range

Distance measuring accuracy

–typical accuracy

Measuring duration

–typical

–maximum

Lowest indication unit

Operating temperature

Storage temperature

Relative air humidity, max.

Laser class

Laser type

Laser beam diameter (at 25°C/

77 °F), approx.

–at 33 ft (1 m) distance

–at 23 ft (7 m) distance

Batteries

Rechargeable battery

Battery service life, approx.

–Individual measurements,

approx.

–Continuous measurement

mode, approx..

3610K16610

2 5/16” x 4 x 1/14”

(58 x 1 x 32mm)

2 in ... 23 ft ( . 5 ... 7 mA)

±1/16 inB (±1.5 mm)

< .5 s

4 s

1/16 in; . 5 ft; 1mm

+14°F … + 122°FC

(– 1 °C ... +5 °C)

– 4 °F ... +158 °F

(–2 °C ... +7 °C)

9 %

635 nm, <1 mW

1/4 in (6 mm)

1 5/8 in (42 mm)

4 x 1.5 V AAA (LR 3)

4 x 1.2 V AAA (KR 3)

3 D

5 HoursD

-10-

GLR225 Laser Rangefinder

Technical Data

Table des matières

Autres manuels Bosch Instrument de mesure

Bosch

Bosch ShockWatch SpotBot BLE Manuel utilisateur

Bosch

Bosch Intellic EFAS-4.10 Manuel d'instructions

Bosch

Bosch GLM 80 Manuel utilisateur

Bosch

Bosch PMD 10 Manuel utilisateur

Bosch

Bosch GDB 350 WE Professional Manuel utilisateur

Bosch

Bosch LR40G Instructions de montage

Bosch

Bosch GLM 40 Manuel utilisateur

Bosch

Bosch PTD 1 Manuel utilisateur

Bosch

Bosch GRL 400 H Professional Manuel utilisateur

Bosch

Bosch D-tect200C Instructions de montage

Bosch

Bosch GLM 50 C Instructions de montage

Bosch

Bosch Professional GLM 50-27 CG Manuel utilisateur

Bosch

Bosch Quigo Manuel utilisateur

Bosch

Bosch Zamo Manuel utilisateur

Bosch

Bosch BEA 070 Manuel utilisateur

Bosch

Bosch PDO 6 Manuel utilisateur

Bosch

Bosch GIM 60 Professional Manuel utilisateur

Bosch

Bosch gll3-80 P Manuel utilisateur

Bosch

Bosch GLL 3 X Professional Manuel utilisateur

Bosch

Bosch GLM 500 Professional Manuel utilisateur

Bosch

Bosch LTE 65EU Manuel utilisateur

Bosch

Bosch GOL 20 D Manuel utilisateur

Bosch

Bosch GIC 120 C Professional Manuel utilisateur

Bosch

Bosch GLM400CL Instructions de montage

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur