BIXOLON SPP-R200III Manuel d'instructions

Bluetooth Connection Manual

SPP-R200III

Mobile Printer

Rev. 1.00

http://www.bixolon.com

Rev. 1.00

- 2 -

SPP-R200III

■Table of Contents

1. Manual Information......................................................................................................3

2. Precautions ..................................................................................................................3

3. iOS MFi mode change .................................................................................................3

3-1 Set-up by printer button ............................................................................................3

3-2 iOS mode check .......................................................................................................3

4. Bluetooth Connection Instructions............................................................................4

4-1 iOS mode enable......................................................................................................4

4-2 Android mode(iOS mode disable).............................................................................6

5. Troubleshooting...........................................................................................................8

Rev. 1.00

- 3 -

SPP-R200III

1. Manual Information

This Bluetooth Connection Manual provides information on the connection of Bluetooth-

enabled iOS devices with the printer (SPP-R200III).

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Precautions

2-1 To connect the printer with another device via Bluetooth, the devices must be within

10m of one another. The connection is broken if the distance between devices

exceeds 10m.

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present.

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same frequen

cy is present, transmission may be interrupted. Separate the printer and Bluetooth-

enabled device from such interrupting devices by a distance of at least 5m.

3. iOS MFi mode change

You can switch over to MFi mode which allows you to have Bluetooth connection with iOS

devices. (Note: Make sure that MFi mode must be on.)

3-1 Set-up by printer button

- Turn on the printer power.

- Push the power button and feed button for 2 seconds while paper cover is opened.

- After beep sound, close the cover.

- Reboot the printer after checking below message.

iOS mode enable!!

Please Reboot Printer!!

- Repeat above procedure to make MFi mode disable.

3-2 iOS mode check

- Implement Self Test

- If firmware version is Vxx.xx STOBa, iOS mode will be disable.

- If firmware version is Vxx.xx STOBi, iOS mode will be enable.

Rev. 1.00

- 4 -

SPP-R200III

4. Bluetooth Connection Instructions

4-1 iOS mode enable

1) Select the icon. 2) Select “Bluetooth”.

3) Select the printer to connect. 4) Enter PIN. (default : 0000)

Rev. 1.00

- 5 -

SPP-R200III

5) Select “Pair”. 6) Bluetooth communication is available.

Rev. 1.00

- 6 -

SPP-R200III

4-2 Android mode(iOS mode disable)

1) Select the icon. 2) Select “Bluetooth”.

3) Select the printer to connect. 4) Enter PIN. (default : 0000)

Rev. 1.00

- 7 -

SPP-R200III

5) Select “OK”. 6) Bluetooth communication is available.

4-2-1 NFC Auto pairing

Referring to 4-2 Android mode, paring process will be simplified by means of using NFC Auto paring

function. (Only, the device should support NFC Read/Write function.)

1) Tap your host device to NFC tag 2) Enter PIN. (default : 0000)

on a printer. (Following process is the same as 5), 6) in 4-2)

Rev. 1.00

- 8 -

SPP-R200III

5. Troubleshooting

5-1 Please follow the guide below if Bluetooth is not searched on iOS device.

1) Perform self test to check the printer is set as iOS mode.

2) Check whether printer is connected to other iOS device. Printer is not able to be

found on your iOS device if it is connected to other iOS device. If STATUS LED

blinks when you press Feed button, it means that printer is connected to other iOS

device.

You need to disconnect the connection to other iOS device, or turn on the printer

again while the paper cover is opened.

* Printer is automatically connected to last iOS device which was connected in iOS

mode. But it does not make a connection to any device, if user turns it on while the

paper cover of it is opened.

5-2 Refer to this, if you see the pop-up message as below.

1) “Failed to connect to SPP-R200III”.

2) The “Failed to connect”message might appear on a screen, since NFCAuto pairing

merely supports Bluetooth paring and does not allow device to device

communication. However, it operates properly.

Autres manuels pour SPP-R200III

Table des matières

Autres manuels BIXOLON Imprimante

BIXOLON

BIXOLON STP-131 Instructions de montage

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Manuel utilisateur

BIXOLON

BIXOLON SLP-DX220 Manuel utilisateur

BIXOLON

BIXOLON XT5-40NR Series Manuel utilisateur

BIXOLON

BIXOLON XD5-40d Series Manuel utilisateur

BIXOLON

BIXOLON SRP-S3000 Manuel d'instructions

BIXOLON

BIXOLON SRP-150 Manuel utilisateur

BIXOLON

BIXOLON SRP-E300 Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SRP-330II Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SRP-350plusV Manuel utilisateur

BIXOLON

BIXOLON Bixolon SRP-270 Manuel utilisateur

BIXOLON

BIXOLON SPP-R400 Manuel utilisateur

BIXOLON

BIXOLON XT3-40 Series Manuel utilisateur

BIXOLON

BIXOLON SPP-L410K5L Manuel utilisateur

BIXOLON

BIXOLON SPP-R410 Manuel utilisateur

BIXOLON

BIXOLON SRP-500 Manuel utilisateur

BIXOLON

BIXOLON SRP-350II Manuel utilisateur

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Instructions d'installation

BIXOLON

BIXOLON SRP-380 Manuel d'installation et d'exploitation

BIXOLON

BIXOLON SRP-280C Manuel utilisateur

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Manuel utilisateur

BIXOLON

BIXOLON SRP-330III Manuel utilisateur

BIXOLON

BIXOLON BK3-31 Manuel utilisateur

BIXOLON

BIXOLON SRP-275 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur