Biostar G31-M7 Guide de l'utilisateur

G31-M7 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant toPart15 of theFCC Rules.T hese limits are designed

to provide reasonable protec tion against harmful interference in a residential

installation. T his equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.There is no guarantee

that interference will not occur in a particula r ins tallation.

The ve ndo r makes no represe nta tions or warranties with respec t to the

contents here andspecially disclaims any implied warranties ofmerchantability

o r fi tn es s fo r a ny p u rp os e . F u rt he r t he ve nd o r res e rves t he ri g ht to rev is e t h is

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplication of this publication, in pa rt or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mis takes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction.....................................................1

1.1 Be fore Yo u Start................................................................... 1

1.2 Package Checklist................................................................ 1

1.3 MotherboardFeatures.......................................................... 2

1.4 Re ar Panel Co nne cto rs.......................................................... 3

1.5 Mothe rboard Layout ............................................................ 4

Chapter 2: Hardware Installation........................................5

2.1 Installing Central Processing Unit (CPU)................................ 5

2.2 FAN Headers........................................................................ 7

2.3 Installing System Memory...................................................... 8

2.4 Conne ctors and Slots ............................................................10

Chapter 3: Headers & Jumpers Setup................................. 12

3.1 How to Setup Jumpers..........................................................12

3.2 Detail Settings.....................................................................12

Chapter 4: Useful Help.....................................................18

4.1 Driver Installation Note .......................................................18

4.2 AMI BIOS Beep Code............................................................19

4.3 Extra Information................................................................20

4.4 Troubleshooting...................................................................22

Appendencies: SPEC In Other Language.............................24

German................................................................................................24

France..................................................................................................26

Italian..................................................................................................28

Spanish ................................................................................................30

Portuguese...........................................................................................32

Polish...................................................................................................34

Russian................................................................................................36

Arabic..................................................................................................38

Japanese ..............................................................................................40

G31-M7

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk yo u for choosing our pro duct. Be fore yo u start installing the

mo the rboa rd , plea se make sure you fo llo w the ins tru ctio ns be lo w:

Prepare a dry and stable working environment with

s uf fi cie nt ligh ting .

Always disconnect the computer from power outlet

be fo re ope ra tion .

Befo re you take the mo the rboa rd ou t f rom a n ti-s ta tic

bag, ground yourself properlyby touching anysafely

grounde d appliance, o r use gro unded wrist strap to

remove the static charge.

Avo id tou ch ing the compone nts o n mo the rboa rd o r the

rear side of the boa rd unless necessary. Ho ld the board

on the edge, do not try to be nd o r flex the board.

Do no t leave any unfastened small pa rts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat

source , humid air and wa te r.

1.2 PACKAGE CHECKLIST

HDD Cable X 1

Se ria l ATA Cab le X 1

Use r’s Ma nua l X 1

Fully Setup Driver CD X 1

Rear I/O Panel for ATX Case X 1

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

S/PDIF Cable X 1 (optional)

Se ria l ATA Po we r Cab le X 1 (o ptio nal)

Note: The package contents may differ by area or your motherboard version.

Motherboard Manual

1.3 MOT HERBOARD FEAT URES

SPEC

CPU

LGA 775

Intel Core2Duo /Core2Quad/ Celeron 4xx

/ Pentium D / Pentium 4 / Celeron D

processor

Supports Hyper-Threading / Execute Disable Bit /

Enhanced Intel SpeedStep® / Intel Architecture-64 /

Extended Memory 64 Technology / Virtualization

Technology

FSB Support 533 / 800 / 1066 / 1333 MHz

Chipset Intel G31

Intel ICH7

SuperI/O

ITE 8712F

Provides the most commonly usedlegacy

Super I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

HardwareMonitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DIMM Slots x 2

Eac h DIMM supports 256MB / 512MB /

1GB / 2GB DDR2

Max Memory Capicity 4GB

Dual Channel Mode DDR2memorymodule

Supports DDR2 800/667

Supports DDR2 533 (with FSB 533/1066 CPU)

Registered DIMM and ECC DIMM is not supported

Graphics GMA 3100 Max Shared Video Memory is 256MB

IDE Integrated IDEController Ultra DMA 33 / 66 / 100 Bus Mas ter Mode

supports PIO Mode 0~4

SA TA 2 I nt e gr at e d S eri al ATA C ont r ol l er Datatransfer rates up to 3.0 Gb/s.

SATA Version 2.0specificationcompliant

LAN

Realtek RTL 8101E / 8102E /

8111C (optional)

10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit

bandwidth is for Realtek RTL 8111C only)

Half / Full duplexcapability

Sound

Codec

ALC662 5. 1 channels audio out

High Definition Audio

PCIslot x2 Supports PCI expansion cards

PCI Express x 16 slot x1 Supports PCI-E x16 expansioncardsSlots

PCI Express x 1 slot x1 Supports PCI-E x1 expansioncards

Floppyconnector x1 Eachconnector supports 2 Floppy drives

PrinterPort Connector x1 Eachconnectorsupports 1 Printer port

IDE Connector x1 Eachconnectorsupports 2 IDE device

On Board

Connector

SATA Connector x4 Eachconnectorsupports 1 SATA devices

G31-M7

SPEC

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CD-in Connector x1 Supports CD audio-in function

S/PDIF out connector x1 Supports digital audio out function

CPU Fan header x1 CPU Fan power s upply (with Smart Fan function)

System Fan header x1 System Fan Power supply

Clear CMO S header x1 Res tore CMOS data to factory default

USB connector x2 Eachconnector supports 2 front panel USB ports

Power Connector (24pin) x1 Connects to Powersupply

Power Connector (4pin) x1 Connects to Power s upply

Back Panel

I/O

PS/2Keyboard x1

PS/2 Mouse x1

S e ri al P ort x 1

VGA port x1

LAN port x1

USB Port x4

Audio Jack x3

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Provide RS-232 Serial c onnecti on

Connect to D-SUB monitor

Connect to RJ-45 ethernet cable

Connect to USB devices

Provide Audio-In/O ut and microphone connection

Board Size 195 (W) x 244 (L) mm

OS Support Windows 2000 / XP / VISTA BiostarReserves the right toadd or removesupport for

any OS with orwithout notice

1.4 REAR PANEL CONNECT ORS

PS/2

Mouse

P S/ 2

Keyboard

USBX2USBX2

LA N

COM1 VGA

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

Since t he au dio c hip s up por ts High Definiti on Audio Specific atio n, t he func tion of eac h a udi o

jack c an be d efine d b y sof tw are. T he i n pu t / out pu t fu ncti o n o f e ach au di o j ac k l isted ab o ve

r eprese nts th e d ef ault s etti ng . H o we ver , w he n co nnec ting e xt ernal micr oph on e t o th e a udi o por t ,

pleas e us e t he Line In ( blue) an d M ic In (Pi nk) au dio jac k.

Motherboard Manual

1.5 MOT HERBOARD LAYOUT

JKB MS1

JCO

JVGA1

JUSB2

JRJ45US B1

FDD1

IDE1

DDR2_B1

DDR2_A1

LGA775

CPU1

PE X16_1

PCI1

PCI2

BAT1

JAUDIOF1

J CDI N 1

JSPDIF_OUT1

JUS B4JUS B3

JSFAN1

SATA 1

SATA2

SATA3

SATA4

JPA NEL1

JCM OS1

JATXPWR1

JCFAN 1

JATXPWR2

Intel

G31

Intel

ICH7

Codec

LAN

S uper

I/ O

JAUDIO1

PEX1_1

BI O S

JUSBV2

JUS BV1

Not e: ■represents the 1st

pin.

G31-M7

CHAPTER 2: HARDWARE INSTALLATION

2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation

for future use. When the CPU is removed, cover the Pin Cap on the

empty socket to ensure pin legs won’t be damaged.

Pin-Cap

Step1:Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.

Motherboard Manual

Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge.The CPU will

fit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into

the JCFAN1. This completes the installation.

G31-M7

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connectormay be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Heade r

Assignment

1 Ground

2 Power

3 FAN RPM

rate sense

JC FAN1

4 Smart Fan

Control

JSFAN1: System Fan Header

Assignment

1 Ground

2 +12V

JSFAN1

3 FAN RPM

rate sense

Note:

The JCFAN1 su pp or t 4- pi n h ea d co nn ector an d JSFAN 1 s up por t 3- pi n he ad c on nect or .

Whe n co nn ecti ng wit h wir es o nto c on nect or s, pl e ase not e t hat t he r e d wir e i s th e p osi ti ve

and sho uld be c on nec ted to pin #2, an d t he blac k wir e is Gr oun d an d sh ould be

conn ecte d t o GND .

Motherboard Manual

2.3 INST ALLING SYSTEM MEMORY

A. DDR2 module

DDR2_B1

DDR2_A1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

Autres manuels pour G31-M7

Table des matières

Langues :

Autres manuels Biostar Carte mère

Biostar

Biostar U8868 Manuel

Biostar

Biostar Z270GTN Manuel utilisateur

Biostar

Biostar M6TBE Manuel utilisateur

Biostar

Biostar P4SDP Manuel utilisateur

Biostar

Biostar M5VIA Manuel utilisateur

Biostar

Biostar 945GC-M7 TE Guide de l'utilisateur

Biostar

Biostar Hi-Fi B150S1 Manuel utilisateur

Biostar

Biostar B85MG Guide de l'utilisateur

Biostar

Biostar H61IL Guide de l'utilisateur

Biostar

Biostar H61MHV2 Guide de l'utilisateur

Biostar

Biostar Hi-Fi B85S2G Guide de l'utilisateur

Biostar

Biostar A75MH Guide de l'utilisateur

Biostar

Biostar Z270GT6 Manuel utilisateur

Biostar

Biostar M7VIB Manuel utilisateur

Biostar

Biostar MCP6PB M2 PLUS - BIOS Manuel utilisateur

Biostar

Biostar MCP6P3 Guide de l'utilisateur

Biostar

Biostar M7SXF Manuel utilisateur

Biostar

Biostar M6TWJ Manuel utilisateur

Biostar

Biostar GF8200E - BIOS Manuel utilisateur

Biostar

Biostar B450MX Manuel utilisateur

Biostar

Biostar TA880GXE - BIOS Manuel utilisateur

Biostar

Biostar P4 TGV Manuel utilisateur

Biostar

Biostar M6TLI Manuel utilisateur

Biostar

Biostar GF7025-M2 TE - BIOS SETUP Guide de l'utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur