Biostar BIPV10-IA Guide de l'utilisateur

BIPV10-IA Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ........................................ 3

1.1 Before You Start ................................................................................ 3

1.2 Package Checklist............................................................................. 3

1.3 Mainboard Specification................................................................... 4

1.4 Rear Panel.......................................................................................... 5

1.5 Mainboard Layout ............................................................................ 6

Chapter 2: Installation.......................................... 7

2.1 CPU...................................................................................................... 7

2.2 Fan Header......................................................................................... 7

2.3 System Memory.................................................................................. 8

2.4 Power Supply ..................................................................................... 9

2.5 Onboard Slot/Connector/Header/Jumper.................................... 10

Chapter 3: BIOS Setup ........................................ 21

3.1 Main Menu........................................................................................ 23

3.2 Advanced Menu............................................................................... 26

3.3 PCI/PnP Menu.................................................................................. 37

3.4 Boot Menu ........................................................................................ 40

3.5 Chipset Menu.................................................................................... 42

3.6 Exit Menu.......................................................................................... 47

Chapter 4: Useful Help ........................................ 51

4.1 Driver Installation Note.................................................................. 51

4.2 AMI BIOS Beep Code....................................................................... 52

4.3 Troubleshooting............................................................................... 53

BIPV10-IA

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Thank you for choosing our product. Before you start installing the

mainboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with

sufficient lighting.

Always disconnect the system from power outlet

before operation.

Before you take the mainboard out from anti-static

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

Avoid touching the components on mainboard or the

rear side of the board unless necessary. Hold the board

on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

Keep the system from dangerous area, such as heat

source, humid air, and water.

Please switch on/off the machine normally. That is, DO

NOT pull out power cord directly from the mainboard

or the system may damage.

1.2 PACKAGE CHECKLIST

Mini-ITX Mainboard x 1

Fully Setup Driver CD x 1

I/O Bracket x 1

SATA Cable x 1 (Optional)

Mini-ITX Mainboard Manual

1.3 MAINBOARD SPECIFICATION

Specif ica tion

CPU

Int el C PU On- board

Intel Atom D525 @1.8GHz dual core

Pineview-D Processor

Optional for:

D425 @1.8GHz (TWP 10W)

FSB Supports up 800 MHz

Chipset Intel NM10 Express Chipset

Graphic Intel Pineview-D integrated graphics engine

Max Shared Video Memory is 384 MB

Supports dual displays (Extended mode)

as below:

—24bit LVDS (by CH7036)

—RGB (Support up to WXGA+

2048x1536/60Hz)

Super I/O

ITE IT8718 + FINTEK F81216D

Provides the most commonly used leg acy

Super I/O functionality.

128pin type

Environ ment Control in itiat ives ,

H/W Monitor

Fan Speed Controller

Main

Memory

LONG-DIMM x 2

Supports DDR3 800 MHz

DIMM supports 512MB / 1GB / 2GB

Max Memory Capac ity 4GB

Registered DIMM or ECC DIMM is not

supported

SATA Chips et built-in Seria l ATA controller

SATA Vers io n 2.0 s pecification compliant

Data transfer rates up to 3.0 Gb/s

LAN Realtek RTL 8111E x 2

10 / 100 / 1000 Mb/s auto negotiation

Ha lf / Fu ll d up lex capability

Sound

Codec Realtek ALC662

5.1 channels audio out t (only for x3 audio

jack version)

High- Defin itio n A ud io s upp ort

PCI slot x1

Slot

Mini PCI-E Slot x1

SATA2 Connector x2

Front Panel Header x1

Parallel Connector x1

On Board

Connectors

& Headers

Digital I/O Connector x1

BIPV10-IA

Specif ica tion

CPU Fan Header x1

System Fan Header x1

Clear CMOS Header x1

AT/ATX Power Switch Header x1

USB 2.0 Header x2 (Support 3 USB devices)

LVDS Connector x1

LCD Power Select Header x1

LCD Backlight Power ON/OFF He ader x1

LCD Backlight Inverter Connector x1

Inverter Power Select Header x1

Backlight Brightness Adjust Header x1

Serial Connectors (RS-232) x3

Power Connector (20pin) x1

Rear Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

Serial Port x3

VGA Port x1

LAN port x2

USB Port x4

Audio Jack (Line-out/Mic) x2

3 x RS-232

Optional x 3 (L ine- in/L ine- out/Mic)

Board Size

170 mm (W) x 170 mm (L) Mini-ITX

Support Windows XP/XPE, Linux

Biostar reserves the right to add or remove

support for any OS with or without notice.

1.4 REAR PANEL

PS/2

Mouse

PS/2

Keyboard

JCOM4

Mic In

(Center/SUB)

Line In

(Rear)

(Optional)

Line Out

(Fro nt)

LAN

USB 2.0 x 4

JCOM3

LAN

VGA

JCOM1

Mini-ITX Mainboard Manual

1.5 MAINBOARD LAYOUT

JCOM1

JKBMS1

JVGA1

JRJ45USB1

JRJ45USB2

JAUDIO1

JCOM2

JCOM5

JCOM6

JP2

JP1

JP5

JP4

JP3

JP6

LVDS-OUT1

JC1

JLV2

JLV1

JBL1

PE1

PCI1

JPRNT1

JDIO1

JUSB4

BAT1

JUSB3

BIOS

JCMOS1

JAT1

JSFAN1 JPANEL1

SATA1 SATA2 DDR3_A2

DDR3_A1

JATXPWR1

Intel

Atom

D525

CPU1

NM10

JBL2

JCFAN1

Note: represents the 1■st pin.

BIPV10-IA

CHAPTER 2: INSTALLATION

2.1 CPU

The mainboard includes an embedded Intel Atom D525 processor, and a

heatsink has been installed to provide sufficient cooling.

2.2 FAN HEADER

The fan header supports cooling-fans built in the system. The fan cable

and connector may be different due to the fan manufacturer.

JCFAN1: CPU Fan Header

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate

sense

JSFAN1: System Fan Header

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate

sense

Note:

The CPU Fan Header and System Fan Header support 3-pin head connector. When

connecting with wires onto connectors, please note that the red wire is the positive and

should be connected to pin#2, and the black wire is Ground and should be connected to

GND.

Mini-ITX Mainboard Manual

2.3 SYSTEM MEMORY

DDR3_A1/DDR3_A2: Memory Module (LONG-DIMM)

DD R3_A 1

DD R3_A 2

2 Align a DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

3 Insert the DIMM firmly into the slot until the retaining chip snap back in

place and the DIMM is properly seated.

Memory Capacity

DIMM Socket Location DDR3 Module Total Memory Size

DDR3_A1 512MB/1GB/2GB

DDR3_A2 512MB/1GB/2GB

Max is 4GB.

BIPV10-IA

2.4 POWER SUPPLY

JATXPWR1: ATX Power Source Connector (20-pin)

This connector allows user to connect 20-pin power connector on the power

supply.

110

1120

Pin Assignment Pin Assignment

1 +3.3V 11 +3.3V

2 +3.3V 12 -12V

3 GND 13 GND

4 +5V 14 Power Supply On

5 GND 15 GND

6 +5V 16 GND

7 GND 17 GND

8 Power Good 18 NC

9 +5V Standby 19 +5V

10 +12V 20 +5V

Mini-ITX Mainboard Manual

2.5 ONBOARD SLOT/CONNECTOR/HEADER/JUMPER

PCI1: Peripheral Component Interconnect Slot

This mainboard is equipped with 1 standard PCI slot. PCI stands for Peripheral

Component Interconnect, and it is a bus standard for expansion cards. This PCI

slot is designated as 32 bits.

PCI1

PE1: Mini PCI-E Slot

This mainboard is equipped with 1 Mini PCI-E Slot.

Table des matières

Autres manuels Biostar Carte mère

Biostar

Biostar U8668 Grand Manuel utilisateur

Biostar

Biostar M7 VIP Pro Guide de l'utilisateur

Biostar

Biostar TH55 HD - BIOS Manuel utilisateur

Biostar

Biostar TA785 A2+ Guide de l'utilisateur

Biostar

Biostar TF560 A2 Guide de l'utilisateur

Biostar

Biostar H310MHC2 Manuel utilisateur

Biostar

Biostar H110MHV3 Manuel utilisateur

Biostar

Biostar P4 TSP-D2 Instructions d'utilisation et d'installation

Biostar

Biostar TP55 - BIOS Guide de l'utilisateur

Biostar

Biostar TPOWER I55 Guide de l'utilisateur

Biostar

Biostar M7VIW Instructions d'utilisation et d'installation

Biostar

Biostar A85W 3D Guide de l'utilisateur

Biostar

Biostar A690E-IS Guide de l'utilisateur

Biostar

Biostar P4 TDG Manuel utilisateur

Biostar

Biostar G41-M7 Guide de l'utilisateur

Biostar

Biostar P4TCA PRO Guide de l'utilisateur

Biostar

Biostar M7TDB Manuel utilisateur

Biostar

Biostar Z270GT6 Manuel utilisateur

Biostar

Biostar G41U3G Guide de l'utilisateur

Biostar

Biostar G31E-M7 - BIOS Manuel utilisateur

Biostar

Biostar N68S3B Guide de l'utilisateur

Biostar

Biostar A55MLV Guide de l'utilisateur

Biostar

Biostar A740G M2L PLUS - BIOS 2 Manuel utilisateur

Biostar

Biostar Hi-Fi H87S3E Guide de l'utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur