Belkin OmniView Secure F1DN102U Manuel utilisateur

Belkin OmniView® Secure KVM Switch User CC supplement

Belkin OmniView® Secure KVM Switch User Manual F1DN102U F1DN104U F1DN108U Common

Criteria supplement

This section supplements the Belkin Quick Installation Guide in accordance with ADO_IGS.1 Common

Criteria Assurance Measure requirements.

This User Guidance and Common Criteria EAL 4 validation apply to the TOE Common Criteria Evaluated

version of OmniView™ Secure KVM Models listed below:

F1DN102U Version v.321211

F1DN104U Version v.321211

F1DN108U Version v.321211

Before you begin: The Users of the Belkin OmniView™ Secure KVM must review all associated

documentation and guidance, prior to proceeding with installation and use of the KVM switch.

1.1 Receipt and preparation of TOE and Environment prior to installation

Receipt

•Assure that tamper seals are intact on the KVM switch.

Environment preparation

•The Belkin OmniView KVM secure must be located in a physically secure location providing

physical protection and limited (authorized user) access controls.

1.2 Verification of Common Criteria components

The following are authorized devices for the Common Criteria Evaluated configuration. Assure that

installation processes resulting in the following hardware/firmware configuration:

TOE Belkin Secure KVM Switch 2 Port PN # F1DN102U v.321211 (or)

Belkin Secure KVM Switch 4 Port PN # F1DN104U v.321211 (or)

Belkin Secure KVM Switch 8 Port PN # F1DN108U v.321211

(and) Firmware Version 3.16

Environment USB Mouse (Peripheral Group Member)

Environment USB Keyboard (Peripheral Group Member)

Environment Monitor – VGA connector (Peripheral Group Member)

Environment Host Computers Qty 2, 4 or 8 based on KVM used (IT Environment Computer

resources)

Belkin OmniView® Secure KVM Switch User CC supplement

1.3 Usage Assumptions

The Common Criteria Evaluated Configuration requires the following assumptions in usage of the

OmniView Secure KVM device. These assumptions should be assured either through facility or

procedural provisions.

•An AUTHORIZED USER possesses the necessary privileges to access the information

transferred by the TOE.

•USERS are AUTHORIZED USERS.

•The TOE meets the appropriate national requirements (in the country where used) for

conducted/radiated electromagnetic emissions. [In the United States, Part 15 of the FCC Rules

for Class B digital devices.]

•Only the selected COMPUTER’S video channel will be visible on the shared MONITOR.

•The TOE is installed and managed in accordance with the manufacturer’s directions.

•The AUTHORIZED USER is non-hostile and follows all usage guidance.

•The TOE is physically secure.

•Vulnerabilities associated with attached DEVICES (SHARED PERIPHERALS or SWITCHED

COMPUTERS), or their CONNECTION to the TOE, are a concern of the application scenario and

not of the TOE.

2. Common Criteria Administrative Guidance - OmniView® Secure KVM Switch User Manual

F1DN102U F1DN104U F1DN108U

The follow section lists the supplemental information relating to a Common Criteria deployment for the

OmniView® Secure KVM Switch User Manual in accordance with AGD_USR.1 & AGD_ADM.1 Common

Criteria Assurance Measure requirements.

Usage Assumptions

Note that the usage assumptions listed in Section 1.3 must be maintained to assure all TOE security

objectives are maintained during usage.

Applicability of OmniView® Secure KVM Switch User Manual to Common Criteria

The OmniView Secure KVM Switch User Manual applies in its entirety to the Common Criteria Evaluated

Configuration.

Autres manuels pour OmniView Secure F1DN102U

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Belkin Changer

Belkin

Belkin F5U237 Manuel utilisateur

Belkin

Belkin OmniView 5216K Manuel utilisateur

Belkin

Belkin OmniView F1DW116C Manuel utilisateur

Belkin

Belkin F1DN002MOD-KM-4 Manuel utilisateur

Belkin

Belkin F5L009 - Network USB Hub Manuel utilisateur

Belkin

Belkin F1DJ104P-B Manuel utilisateur

Belkin

Belkin OmniView Secure F1DN104U Manuel utilisateur

Belkin

Belkin OmniView F1DS102P Manuel technique

Belkin

Belkin 16-Port Gigabit Switch Manuel utilisateur

Belkin

Belkin ePowerSwitch F1D001 Manuel utilisateur

Belkin

Belkin P75341ej Manuel utilisateur

Belkin

Belkin F1DN104K-3 Feuille d'instructions

Belkin

Belkin Secure DVI-I Manuel utilisateur

Belkin

Belkin F1DN116KVM-UN-4 Manuel utilisateur

Belkin

Belkin F1DE101H Manuel utilisateur

Belkin

Belkin OmniView Dual-User PRO3 Manuel utilisateur

Belkin

Belkin F1DK102U - KVM Switch With Cabling Manuel utilisateur

Belkin

Belkin F5U221 Manuel utilisateur

Belkin

Belkin OmniView SOHO F1DS102L Manuel utilisateur

Belkin

Belkin OmniView F1DJ102P-B Manuel utilisateur

Belkin

Belkin P75470ea Manuel utilisateur

Belkin

Belkin F1DK102PEA Manuel utilisateur

Belkin

Belkin P73371-F5U524-G Manuel utilisateur

Belkin

Belkin F5L009UK Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur