Beckhoff KM2002 Manuel de l'opérateur
Documentation
KM2002, KM2004, KM2008
Terminal modules with digital outputs, 24 V, 0.5 A
3.2.0
2017-01-23
Version:
Date:
Table of contents
KM2002, KM2004, KM2008 3Version: 3.2.0
Table of contents
1 Foreword ....................................................................................................................................................4
1.1 Notes on the documentation........................................................................................................... 4
1.2 Safety instructions .......................................................................................................................... 5
1.3 Documentation Issue Status........................................................................................................... 6
2 Product overview.......................................................................................................................................7
2.1 Terminal Modules - System Overview ............................................................................................ 7
2.2 KM2002 ........................................................................................................................................ 10
2.2.1 Introduction ......................................................................................................................10
2.2.2 Technical data..................................................................................................................11
2.3 KM2004 ........................................................................................................................................ 12
2.3.1 Introduction ......................................................................................................................12
2.3.2 Technical data..................................................................................................................13
2.4 KM2008 ........................................................................................................................................ 14
2.4.1 Introduction ......................................................................................................................14
2.4.2 Technical data..................................................................................................................15
2.5 KM plug-in connectors .................................................................................................................. 15
2.5.1 Ordering information for KM plug-in connector ................................................................15
2.5.2 Technical Data .................................................................................................................16
3 Mounting and Wiring...............................................................................................................................17
3.1 Recommended mounting rails ...................................................................................................... 17
3.2 Dimensions ................................................................................................................................... 17
3.3 Mounting and demounting - terminals with traction lever unlocking ............................................. 19
3.4 Mounting and demounting - terminals with front unlocking........................................................... 21
3.5 Wiring............................................................................................................................................ 23
3.6 Connection.................................................................................................................................... 25
4 Access from the user programm ...........................................................................................................26
4.1 Process Image.............................................................................................................................. 26
5 Appendix ..................................................................................................................................................27
5.1 Support and Service ..................................................................................................................... 27
Foreword
KM2002, KM2004, KM20084 Version: 3.2.0
1 Foreword
1.1 Notes on the documentation
Intended audience
This description is only intended for the use of trained specialists in control and automation engineering who
are familiar with the applicable national standards.
It is essential that the documentation and the following notes and explanations are followed when installing
and commissioning these components.
It is the duty of the technical personnel to use the documentation published at the respective time of each
installation and commissioning.
The responsible staff must ensure that the application or use of the products described satisfy all the
requirements for safety, including all the relevant laws, regulations, guidelines and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development.
We reserve the right to revise and change the documentation at any time and without prior announcement.
No claims for the modification of products that have already been supplied may be made on the basis of the
data, diagrams and descriptions in this documentation.
Trademarks
Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered
trademarks of and licensed by Beckhoff Automation GmbH.
Other designations used in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owners.
Patent Pending
The EtherCAT Technology is covered, including but not limited to the following patent applications and
patents: EP1590927, EP1789857, DE102004044764, DE102007017835 with corresponding applications or
registrations in various other countries.
The TwinCAT Technology is covered, including but not limited to the following patent applications and
patents: EP0851348, US6167425 with corresponding applications or registrations in various other countries.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany
Copyright
© Beckhoff Automation GmbH & Co. KG, Germany.
The reproduction, distribution and utilization of this document as well as the communication of its contents to
others without express authorization are prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a
patent, utility model or design.
Foreword
KM2002, KM2004, KM2008 5Version: 3.2.0
1.2 Safety instructions
Safety regulations
Please note the following safety instructions and explanations!
Product-specific safety instructions can be found on following pages or in the areas mounting, wiring,
commissioning etc.
Exclusion of liability
All the components are supplied in particular hardware and software configurations appropriate for the
application. Modifications to hardware or software configurations other than those described in the
documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.
Personnel qualification
This description is only intended for trained specialists in control, automation and drive engineering who are
familiar with the applicable national standards.
Description of symbols
In this documentation the following symbols are used with an accompanying safety instruction or note. The
safety instructions must be read carefully and followed without fail!
DANGER
Serious risk of injury!
Failure to follow the safety instructions associated with this symbol directly endangers the
life and health of persons.
WARNING
Risk of injury!
Failure to follow the safety instructions associated with this symbol endangers the life and
health of persons.
CAUTION
Personal injuries!
Failure to follow the safety instructions associated with this symbol can lead to injuries to
persons.
Attention
Damage to the environment or devices
Failure to follow the instructions associated with this symbol can lead to damage to the en-
vironment or equipment.
Note
Tip or pointer
This symbol indicates information that contributes to better understanding.
Foreword
KM2002, KM2004, KM20086 Version: 3.2.0
1.3 Documentation Issue Status
Version Comment
3.2.0 • Technical data for KM plug-in connectors updated
3.1.0 • Technical data for KM plug-in connectors extended
• Update structure
3.0.0 • Migration
• Update structure
• Technical data updated
2.0.0 • Notes about wiring and mounting updated
• Technical data updated
1.0.2 • Technical data updated
• Pinning of terminal block X1 corrected
1.0.1 • Notes about wiring and mounting updated
• Notes about wiring technique corrected
• Technical data updated
1.0.0 • KM2004 and KM2008 added
• Mounting and demounting added
• Dimension drawings added
0.1 • first preliminary documentation for KM2002
Firm and hardware versions
Documentation
version
Hardware version
KM2002 KM2004 KM2008
3.2.0 06 05 04
3.1.0 06 05 04
3.0.0 06 05 04
2.0.0 05 03 02
1.0.2 02 02 00
1.0.1 01 00 00
1.0.0 01 00 00
0.1 00 - -
The hardware version can be found in the serial number printed at the top of the terminal module.
Syntax of the serial number
Structure of the serial number: WW YY FF HH
WW - week of production (CW, calendar week)
YY - year of production
FF - firmware version (n/a for digital modules)
HH - hardware version
Example with Ser. No.: 35 05 00 01
35 - week of production 35
05 - year of production 2005
00 - firmware version 00
01 - hardware version 01
Product overview
KM2002, KM2004, KM2008 7Version: 3.2.0
2 Product overview
2.1 Terminal Modules - System Overview
Fig.1: Bus Terminal Block
Better sensor and actuator functionality makes machines and systems more and more powerful. The Bus
Terminal reliably meets increased requirements for I/O signals through its modularity and compact design.
The existing Beckhoff Bus Terminal system is complemented by the new version of the EMxxxx / KMxxxx
Terminal Module with increased packing density. In many areas of application, cost benefits can be realized
through lower overall installed size and application-specific signal mix.
The new Terminal Modules are fully system-compatible. Like the Bus Terminals, they are bus-neutral and
can therefore be operated with any Beckhoff Bus Coupler and Bus Terminal Controller. Like the standard
Bus Terminals, the EM / KM modules are integrated in the I/O system and connected with the internal
terminal bus (E-bus / K-bus). Bus Terminals and terminal modules can be combined without restriction.
Plug connector
Like for the Bus Terminals, no tools are required for the wiring. Spring-loaded technology is used, however
the connection layer is pluggable (fixed wiring).
Fig.2: Pluggable connection (fixed wiring)
Product overview
KM2002, KM2004, KM20088 Version: 3.2.0
Connection
Plug connectors are available for single and triple conductor connection methods.
Fig.3: Terminal module with plug connector for single conductor connection method (ZS2001-0002)
Fig.4: Terminal module with plug connector for triple-conductor connection method (ZS2001-0004)
Packing density
The Terminal Modules combine 16, 32 or 64 digital inputs or outputs on a very small area. This compact and
slimline design enables very high packing densities, leading to smaller control cabinets and terminal boxes.
Product overview
KM2002, KM2004, KM2008 9Version: 3.2.0
Fig.5: Terminal module with 16 channels
Fig.6: Terminal module with 32 channels
Fig.7: Terminal module with 64 channels
Product overview
KM2002, KM2004, KM200810 Version: 3.2.0
2.2 KM2002
2.2.1 Introduction
Fig.8: Digital Terminal Module with 16 output channels
Digital Terminal Module with 16 output channels (24VDC)
The terminal module KM2002 combines 16 digital outputs with 8 channels per plug connector in a compact
design with high packing density. The binary control signals are transferred (electrically isolated) to the
actuators at the process level. Like the standard Bus Terminals, the terminal modules are integrated in the
Beckhoff I/O system. Plug connectors with spring connections enable plug-in wiring and are available with 1
or 3 pins. LEDs integrated in the connector indicate the signal state for each channel directly at the wire. The
outputs are protected against overload and short circuit.
Table1: Ordering information for terminal modules with 16 digital inputs
Ordering name Scope of supply
KM2002-0000 digital output module, 16 channels (0.5A), without connectors
KM2002-0001 digital output module, 16 channels (0.5A), with 2 connectors ZS2001-0001
KM2002-0002 digital output module, 16 channels (0.5A), with 2 connectors ZS2001-0002
KM2002-0004 digital output module, 16 channels (0.5A), with 2 connectors ZS2001-0004
See also chapter ordering information for KM plug-in connectors [}15].
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Beckhoff Unité de contrôle
Beckhoff
Beckhoff TwinSAFE EJ Series Manuel utilisateur
Beckhoff
Beckhoff KL85 Series Manuel de l'opérateur
Beckhoff
Beckhoff AX2090-BW5 Series Manuel de l'opérateur
Beckhoff
Beckhoff EJ40 Series Manuel de l'opérateur
Beckhoff
Beckhoff AX5021 Manuel de l'opérateur
Beckhoff
Beckhoff M310 Manuel utilisateur
Beckhoff
Beckhoff CX2550-0020 Manuel utilisateur
Beckhoff
Beckhoff EP31 Series Manuel de l'opérateur
Beckhoff
Beckhoff TF6120 Manuel utilisateur
Beckhoff
Beckhoff EtherCAT Box Manuel utilisateur
Beckhoff
Beckhoff BK5200 Mode d’emploi
Beckhoff
Beckhoff CX2550 Series Manuel utilisateur
Beckhoff
Beckhoff EP5 Series Manuel de l'opérateur
Beckhoff
Beckhoff M1400 Mode d’emploi
Beckhoff
Beckhoff EP6224 Manuel de l'opérateur
Beckhoff
Beckhoff EJ7211-0010 Manuel de l'opérateur
Beckhoff
Beckhoff C9900-G072 Guide de l'utilisateur
Beckhoff
Beckhoff EP6002 Manuel de l'opérateur
Beckhoff
Beckhoff C9900-M900 Guide de l'utilisateur
Beckhoff
Beckhoff KM2042 Manuel de l'opérateur
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
