BCM RX815ELT Manuel utilisateur

-1-

Advanced Socket

370 Motherboard

RX815ELT

User’s Manual

http://www.bcmcom.com

-2-

Declaration

Rights:

No part of this manual, including but not limited to the products and software

described in it, may be reproduced, transmitted, transcribes, stored in a retrieval

system, or translated in any form or by any means without the expressed written

permission from the manufacturer.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies and are used only for

identification or explanation purposes without intent to infringe.

lIntel, MMX and Pentium are registered trademarks of Intel Corporation.

lMicrosoft and Windows are registered trademarks of Microsoft Corporation.

lAward and AWARDBIOS are registered trademarks of Award Software, Inc.

lWinbond is registered trademark of Winbond Corporation

Responsibility:

This manual is provided “As-Is” with no warranties of any kind, either expressed or

implied, including, but not limited to the implied warranties or conditions of this

product’s fitness for any particular purpose. In no event shall we be liable for any

loss of profits, loss of business, loss of data, interruption of business, or indirect,

special, incidental, or consequential damages of any kind, even the possibility of

such damages arising from any defect or error in this manual or product. We reserve

the right to modify and update the user manual without prior notice.

WARNING: Replace your system’s CMOS RAM battery only with the identical CR-

2032 3V Lithium-Ion coin cell (or equivalent) battery type to avoid risk of personal

injury or physical damage to your equipment. Always dispose of used batteries

according to the manufacturer’s instructions, or as required by thelocal ordinance

(where applicable).

References:

This manual is created and written by BCM Technical Team, but not limited, to the

information from the RX815 External Production Specifications, and RX815

Specifications. If any comments, suggestions, or errors for this manual, please write

an e-mail to [email protected].

-3-

Compliance & Certificate

CCo

ISO 9001 Certificate:

This device was produced in our plant with advanced quality system certified by

DNV QA Ltd. in according to ISO 9001. This Certificate is valid for:

DESIGN & MANUFACTURE OF MOTHERBOARD AND PERSONAL

COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or his authorized

representatives that the electrical equipment to which it relates satisfies all the

provisions ofthe 1994 Regulations.

FCC Compliance:

FCC stands for Federal Communications Commission.

This product complies with FCC Rules Part 15 and has been tested, and complied

with the EMI rules by a certified body. In normal operation, there shall be no harmful

interference caused by this device nor shall this device accept any interference

received, including interference that may cause undesired operation of this product.

Year 2000 Compliance:

This product is test to be qualified to bear the NSTL Year 2000 Compliant logo. Year

2000 problem is mainly a problem of computer software (OS), and the hardware issue.

With the support of BIOS on motherboard, the Y2K problem can be thoroughly

conquered.

-4-

Easy Installation

Easy Installation Steps

The following “Easy Installation” steps are for users

accustomed to the assembly of a computer system. For

those individuals requiring more specific information,

please refer to the more detailed descriptions located within

the latter chapters of this manual.

Note: You must

keep your power cable unplugged until the

following installation steps are completed.

Getting Started

Touch a grounded metal surface to release static electricity

stored in your body before unpacking your motherboard.

For details please refer to Precaution section in Chapter 3.

Install the CPU by correctly aligning the CPU with the

socket 370 as noted in the motherboard diagram. Once

aligned, press down on the CPU gently but firmly and lock

it. Next, install the 3.3 volt un-buffered SDRAM into the

168 pinDIMM slots.Please see Sec. 3.4.

Plug in any peripheral card(s) that you want to be included

in the setup. Please see Sec. 3.5.

Plug in all cables included in the package except for the

power cord. Please see Sec. 3.6.

Please recheck all steps to ensure no mistakes have been

made and then plug in the power cord and turn on the

power to enter the BIOS setup, Chapter 4.

-5-

Table of Contents

Declaration......................................................................................................2

Compliance & Certificate ................................................................................ 3

Easy Installation ..............................................................................................4

1. Introduction.................................................................................................6

1.1 How To Use This Manual ...........................................................................6

1.2 Check Your Device Items...........................................................................6

2. Features......................................................................................................7

2.1 Features Of The Motherboard..................................................................... 7

3. Installation...................................................................................................9

3.1 Motherboard Layout & Main Parts...............................................................9

3.2 Connectors and Jumpers ..........................................................................12

3.3 CPU (Central Processing Unit) ..................................................................14

3.4 System Memory (DRAM)..........................................................................15

3.5 Expansion Slots.......................................................................................17

3.6 Connectors, Headers, and Ports................................................................18

4. BIOS Setup.................................................................................................24

4.1 BIOS Setup.............................................................................................24

4.2 Main Setup Menu.....................................................................................25

4.3 General Configuration Menu ......................................................................27

4.4 Advanced Configuration Menu....................................................................29

4.5 System Specific Setup.............................................................................31

4.6 Primary IDE Drives ...................................................................................32

4.7 Secondary IDE Drives...............................................................................34

4.8 Peripherals Setup Menu............................................................................36

4.9 Power Management Setup Menu ...............................................................38

4.10 PCI /PnP Configurations Menu.................................................................40

4.11 Hardware Monitor...................................................................................41

4.12 Restore Default Settings .........................................................................42

4.13 Exit.......................................................................................................42

5. Troubleshooting .........................................................................................43

5.1 General Troubleshooting Tips ....................................................................43

-6-

Introduction

1.1 How To Use This Manual

This manual provides information necessary for

Original Equipment Manufactures (OEMs) and home

users to build a ATX compatible system using Intel

Socket 370 CPU motherboard. Follow the installation

procedure presented on theEasyInstallationPage

and

refer to the section number following each step if you

require more detailed instructions.

USER MANUAL

1.2 Check Your Device Items

The standard package should contain the following

items. If you find any of these items be missing or

damaged, please contact your retailer.

Ø1 RX815ELT motherboard

Ø1 IDE ribbon cable (80 wire 40-pin)

Ø1 floppy ribbon cable

Ø1 CD with drivers for RX815ELT Motherboard and

user manual on PDF format.

CHECK ITEMS

-7-

Features

2.1 Features Of The Motherboard

This product is based on the Micro ATX form factor. It features the advanced

multimedia function and provides support for business PC maker. This motherboard

incorporates Intel 815 chipset. Providing features such as integrated 2D/3D AGP VGA

controller with AGP In-Line Memory Module, Ultra DMA 33/66/100 IDE interface,

ACPI Power Management, 10/100Mbps LAN, USB connectivity, and soft sound support.

Processor

ØSingle Intel Socket-370 mechanism for Intel Flip -Chip PGA Celeron or Intel Flip -

Chip PGA Pentium III Processor (Tualatin)

ØSupports 66/100/133 MHz FSB

Core Logic Chipset

ØIntel 815 Chipset includes GMCH (Graphics and Memory Controller Hub), ICH2

(I/O Controller Hub) and FWH (Firm Ware Hub)

System Memory

ØThree 168-pin DIMM sockets up to 512MB (Memory type support 16x64

module)

ØSupports up to 3 double sided DIMMs at 100MHz

ØSupports up to 3 single sided DIMMs or 2 double sided DIMMs at 133MHz

Graphics Support

Ø230MHz RAMDAC; Integrated Hardware Motion Compensation (30 frames per

sec.)

ØDesktop display modes up to 1600 x 1200 x 8 @ 75Hz refresh rate

ØGMCH with 4MB maximum display cache memory through AIMM (AGP In-Line

Memory Module)

Ø1 VGA output port

ØExternal (2x/4x) AGP connector (AGP Specification 2.0 compatible)

PCI Bus Master IDE Controller

ØTwo PCI Busmaster IDE Connectors (up to 4 IDE devices)

ØSupports Ultra DMA: 33MB/s, 66MB/s, and 100MB/s

LAN Support

-8-

Features

ØICH2 integrated with LAN controller with 82562ET(10/100 Ethernet).

IntegratedI/O

ØWinbond W83697HF LPC revision 1.0 super I/O controller

Ø1 Parallel Port (SPP/ECP/EPP/ECP+EPP)

Ø1 Serial Port (16C550 Fast UART Compatible –115kbps)

Ø1 PS/2 Mouse Port

Ø1 PS/2 Keyboard Port

Ø1 Floppy connector

Ø4 Standard USB Ports (2 from the front connector and 2 from the back ports)

Ø3 Fan connectors

ØHardware Monitor Capability (optional)

SystemBIOS

Ø4Mb Flash device in FWH

ØPC-99 and PnP (Plug ‘n Play) compatible

ØSupports ACPI (Advanced Configuration and Power Interface), and APM

(Advanced Power Management)

ØSupports to boot from CD-ROM, SCSI, IDE, FDD, ZIP, and LS-120

Green Features

ØPower Management APM version 1.2

ØIntelligent Power Management fully supported by Windows 2000 with On-Now

and supports all wake -up states (S1 thru S5)

ØWOL (Wake On LAN), WOR (Wake On Ring), Keyboard, Mouse, and USB

wake-up are supported.

Sound System

ØAC97 Revision v. 2.1 integrated in ICH2

Ø3 Audio Phone Jacks (Line-Out,Line-In, Mic-In) and 1 MIDI/Game port

ØIncludes one of each: Modem-In, CD-In, and Aux-In

ExpansionSlots

Ø1 AGP (2x/4x) slot (shared with AIMM)

Ø3 PCI slots (PCI1 supports ATX Riser–optional)

Ø1 Shared PCI/CNR slot.

Mechanical

ØThis motherboard complies with the Micro ATX Form Factor specification, four

layers PCB with dimensions of 9.6” x 8.75”

-9-

Installation

3.1 Motherboard Layout & Main Parts

-10-

Installation

Significant Parts List

ExpansionSlots

CPUSocket Refer to Sec. 3.3

SystemMemory Refer to Sec. 3.4

ExpansionSlots Refer to Sec. 3.5

Front Panel Connectors/Back Panel Ports

IrDA Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Sleep Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Power Switch Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Reset Switch Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

HDD LED Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Power LED Connector (Part of Front Panel Header) Refer to Sec. 3.6.5

Keyboard/Mouse Ports Refer to Sec. 3.6.6

USB/LANPorts Refer to Sec. 3.6.6

Printer/VGA/Serial Ports Refer to Sec. 3.6.6

Game/Sound Ports Refer to Sec. 3.6.6

Connectors

Primary IDE Connector Refer to Sec. 3.6.1

Secondary IDE Connector Refer to Sec. 3.6.2

FloppyConnector Refer to Sec. 3.6.3

Power Connector Refer to Sec. 3.6.4

CD-In (CD-ROM) Connector Refer to Sec. 3.6.7

Aux-In (Auxiliary Line-In) Connector Refer to Sec. 3.6.7

WOL (Wake On LAN) Connector Refer to Sec. 3.6.7

WOR (Wake On Ring) Connector Refer to Sec. 3.6.7

SCSI LED Connector Refer to Sec. 3.6.7

Telephony Connector Refer to Sec. 3.6.7

CPU Fan Connector Refer to Sec. 3.6.7

FAN 2Connector Refer to Sec. 3.6.7

FAN 3 Connector Refer to Sec. 3.6.7

Chassis Intrusion Connector Refer to Sec. 3.6.7

Front USB Connector Refer to Sec. 3.6.7

Mono Out Connector Refer to Sec. 3.6.7

Serial Port 2 Connector Refer to Sec. 3.6.7

Speaker Connection(Optional) Refer to Sec. 3.6.7

Autres manuels pour RX815ELT

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur