Aztech HL117EP Instructions d'utilisation

MODEL

HL117EP

The following items are included in your HL117EP package.

Package Contents

HomePlug AV devices are preconfigured with a common Private Network Name. Adding new HomePlug AV devices to an existing

network with the default Private Network Name is as easy as plugging the device into the power outlet. If you wish to have a unique

private Network Name, simply follow the instructions below. This Easy Start Guide, the User Manual, and the HomePlug AV Utility

software is included in the Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).

Device Overview

Setting up your HomePlug AV Network

Step 1

In Room A, plug in your HomePlug AV device into the power outlet

and connect it to the router using an Ethernet cable.

NOTE: Ensure that your router’s internet connection is UP to allow

access to the internet.

Step 2

In Room B plug in your other Homeplug AV device into the power

outlet and connect it to your computer’s ethernet port using an

Ethernet cable.

Powerline

Activity LED

Ethernet

Activity LED

Power LED

Simple

Connect

Button

Ethernet

Ports 1&2

You may use this AC Pass-through

as an extra power outlet.

Step 3

Confirm that a connection has established on both HomePlug AV

devices. All 3 LEDs (Power , Powerline , and Ethernet )

must be ON. Your Homeplug AV Network is now ready to use and

can access Internet.

DEVICES ARE PLUG

AND PLAY READY.

Resource CD Easy Start

Guide

Ethernet

Cable

HL117EP Warranty

Policy

MODEL

HL117EP

Setup for an Existing Network Connection

If in case you have changed the Private Network Name of your

existing network, you may use the Simple Connect Button of your

HL117EP and the other devices as indicated below:

Within two minutes, press the Simple Connect Button of

HomePlug AV X for TWO SECONDS.

Step 3

To confirm if the connection has established, check the LEDs. The Power LEDs and

the Powerline Activity LEDs on all HomePlugs would be ON.

Step 4

NOTES:

When joining an existing network, you only

have to pair it to one HomePlug AV that belongs

to the existing network.

The Ethernet Activity LED will only be lit if it is

connected to an Ethernet device (e.g. computer,

laptop, etc) through an Ethernet cable.

To perform RESET to factory defaults, press the

Simple Connect Button for 5 to 6 SECONDS.

•

Press the Simple Connect Button of your HomePlug

AV X for 10 SECONDS. After you release the button,

the Power and Powerline Activity LED will turn

OFF and turn ON.

Step 1

Press the Simple Connect Button of HomePlug AV Y for

TWO SECONDS. The Power LED will continuously blink. If

the Power LED did not blink, press the Simple Connect button

again for two seconds.

Step 2

Press for 5 to 6

SECONDS to perform

factory defaul reset.

HomePlug X

(Your new HomePlug)

HomePlug Y

(A HomePlug that

belongs to the existing

network)

HomePlug X

(Your new HomePlug)

HomePlug Y

(A HomePlug that

belongs to the existing

network)

HomePlug X

(Your new HomePlug)

HomePlug Y

(A HomePlug that

belongs to the existing

network)

HomePlug X

(Your new HomePlug)

HomePlug Y

(A HomePlug that

belongs to the existing

network)

Autres manuels Aztech Adaptateur

Aztech

Aztech Wireless N USB Adapter Instructions d'utilisation

Aztech

Aztech HL105E Manuel utilisateur

Aztech

Aztech 200Mbps HomePlug AV Ethernet Adaptor Manuel utilisateur

Aztech

Aztech WL593USB Manuel utilisateur

Aztech

Aztech HL113 E Manuel utilisateur

Aztech

Aztech HL112E Mode d’emploi

Aztech

Aztech WL635USB Manuel utilisateur

Aztech

Aztech HomePlug Turbo Fiche d'information produit

Aztech

Aztech WL592USB Manuel utilisateur

Aztech

Aztech HL106E Manuel du propriétaire

Aztech

Aztech WL562 Manuel utilisateur

Aztech

Aztech WL230USB Wireless B+G Manuel utilisateur

Aztech

Aztech Wireless N USB Adapter Manuel utilisateur

Aztech

Aztech WL568USB Manuel utilisateur

Aztech

Aztech HL117 E Manuel utilisateur

Aztech

Aztech WL630USB Manuel utilisateur

Aztech

Aztech WL590E Manuel utilisateur

Aztech

Aztech Shiro HL100E Fiche d'information produit

Aztech

Aztech WL582USB Instructions d'utilisation

Aztech

Aztech HomePlug AV Manuel utilisateur

Aztech

Aztech HL113EP Instructions d'utilisation

Aztech

Aztech WL230USB Wireless B+G Manuel utilisateur

Aztech

Aztech HL117E Instructions d'utilisation

Aztech

Aztech Easy Mode d’emploi

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur