Avision BT-0911S Manuel utilisateur
A3 Bookedge Scanner
Getting Started
Regulatory model: BT-0911S
Avision Inc.
ENGLISH
ii
Trademarks
Microsoft is a U.S. registered trademark of Microsoft
Corporation.
Windows, Windows Vista, Windows 7 and Windows 8 are either
registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
IBM, IBM PC are registered trademarks of International Business
Machines Corp.
Other brands and product names herein are trademarks or
registered trademarks of their respective holders.
Copyright
All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language,
in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual, or otherwise, without the prior
written permission of Avision Inc.
Material scanned by this product may be protected by
governmental laws and other regulations, such as copyright
laws, the customer is solely responsible for complying with all
such laws and regulations.
Warranty
The information contained in this document is subject to
change without notice.
Avision makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties
of fitness for a particular purpose.
Avision shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
iii
Table of Contents
1. Introduction.............................................. 1-1
2. Scanner Installation.................................. 2-1
2.1 Unlocking your scanner ................................ 2-1
2.2 Installing the Scanner Driver and Connecting
the Cables .................................................. 2-2
3. Completing Your First Scan ....................... 3-1
3.1 Loading Your Paper...................................... 3-1
3.2 Verifying Your Scanner Installation ................ 3-2
3.3 A Glance of the Scanner Properties Dialog Box ... 3-5
4. ISIS Interface Operation........................... 4-1
5. Using the Buttons ..................................... 5-1
5.1 Installing Button Manager V2........................ 5-1
5.2 Checking the Button Configurations before
Scanning.................................................... 5-1
5.3 Scanning From One Touch of the Buttons ....... 5-4
6. Maintenance.............................................. 6-1
6.1 Cleaning the Glass....................................... 6-1
7. Using and Caring the Optional Auto
Document Feeder ...................................... 7-1
7.1 Installing the Auto Document Feeder ............. 7-1
7.2Loading Your Paper...................................... 7-2
1-1
1. Introduction
Congratulations on your purchase of the Avision’s A3-sized
bookedge scanner. Avision is one of the leading companies to
make high quality color image scanner.
Before you install and operate the new scanner, please take
a few minutes to read through this manual. It provides
proper instructions for you to unpack, install, operate and
maintain the scanner.
The following figure indicates the package contents. Please
check all the items against your checklist. If you do not
receive all the items, please contact your authorized local
dealer immediately.
1. Scanner Main Unit
2. Software CD/Quick Guide
3. USB Cable
4. Power Adapter & Power Cord
Note:
Only use the AC adapter DA-48M24 by APD included in the
machine. Using other AC adapters may damage the machine
and void the warranty.
1
3
4
2
2-1
2. Scanner Installation
2.1 Unlocking your scanner
To protect the scanning unit from damage during transportation,
a lock switch is designed at the back of the scanner to keep the
scanning unit from moving. To unlock the scanner, move the
lock switch down as shown in Fig. 2-1.
Figure 2-1 Unlocking the Scanner
Figure 2-2 Home position
Note: If the scanning unit is not located at the front of the
scanner before transporting the scanner, be sure to do the
follows:
1. Turn on the scanner. The scanning unit should move to
the front of the scanner.
2. Press the lock switch down to the “Lock position”.
3. The scanner is now ready to transport.
Scanning unit at
this position
before locking the
scanner
2-2
2.2 Installing the Scanner Driver and Connecting the
Cables
NOTE:
1). The Windows system CD may be required when installing
on some PC’s.
2). To ensure your computer can identify the USB scanner,
please install scanner driver first before connecting the
scanner to your computer.
3). The scanner driver contains TWAIN, ISIS and WIA driver.
If you are running Windows Me, Windows XP, or Windows
Vista, after the installation of scanner driver is completed,
this scanner allows you to scan via a TWAIN, ISIS, or a
WIA interface. Start your TWAIN-compliant image editing
software application to select a TWAIN or WIA user
interface or your ISIS software to select an ISIS user
interface. You may also launch Microsoft’s Scanner and
Camera Wizard to scan via a WIA user interface.
2.2.1 Connecting to Power
Before connecting, make sure the power switch is off.
Plug the small end of the power adaptor into the power jack of
your scanner. Insert the other end to an appropriate power
outlet.
2-3
2.2.2 Turning on the Power
Press the Power Switch button on the front panel, the Power
LED will be lit. To turn off the scanner, press the Power
Switch button for about 3 seconds, the Power LED will be off.
2.2.3 Installing the Scanner Driver
1. Place the supplied CD-ROM onto your CD-ROM drive.
2. The software installation graphic appears. If not, run
“setup.exe”.
2-4
Contents on the installation graphic:
Install Button Manager V2: To use the buttons
on the scanner, you need to install Button Manager
V2. To ensure Button Manager V2 works properly,
please FIRST install Button Manager V2 before
installing the scanner driver.
Install Scanner Driver: To communicate with
your scanner, you need to install the scanner driver.
After installing the Button Manager V2 software,
click Install Scanner Driver to install the scanner
driver on your computer.
Install Adobe Reader: To view the user’s manuals
for the scanner and Button Manager V2, you need to
use Adobe Reader to open and view the manuals in
pdf file format. If you already have Adobe Reader
installed on your computer, you may disregard this
item.
View Manual: Click “View Manual” to view or
print the detailed user manual for the scanner and
Button Manager V2 respectively.
3. Click Install Button Manager V2 to install the Button
Manager V2 software and then click Install Scanner
Driver to install the scanner driver on your computer.
Autres manuels pour BT-0911S
2
Table des matières
Autres manuels Avision Scanner
Avision
Avision AV260C Plus Manuel utilisateur
Avision
Avision FL-1207H Manuel utilisateur
Avision
Avision AV100CS Manuel utilisateur
Avision
Avision AVA3 Plus Manuel utilisateur
Avision
Avision DL-1909H Manuel utilisateur
Avision
Avision PaperAir 10 Manuel utilisateur
Avision
Avision FL-1401B Manuel utilisateur
Avision
Avision DF-1015S Manuel utilisateur
Avision
Avision BS-1708B Manuel utilisateur
Avision
Avision FT-1906H Manuel utilisateur
Avision
Avision AV810CPlus Manuel utilisateur
Avision
Avision AD345GF Manuel utilisateur
Avision
Avision AD340GWN Manuel utilisateur
Avision
Avision FF-0506 Manuel utilisateur
Avision
Avision HF-1115B Manuel utilisateur
Avision
Avision AD3 Series Manuel utilisateur
Avision
Avision AV5200 Manuel utilisateur
Avision
Avision FF-2002H Manuel utilisateur
Avision
Avision BF-1102S Manuel utilisateur
Avision
Avision AV261C Manuel utilisateur
