Avision FB6000E Manuel utilisateur
i
Avision FB6000E Color Image Scanner
User’s Manual
Installing the Scanner
Installing the Software
Editing Your Image
Maintenance
Troubleshooting
i
i
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows and MS-DOS are trademarks of Microsoft Corporation.
IBM, PC, AT, XT are registered trademarks of International Business
Machines Corp.
Other brands and product names herein are trademarks or registered
trademarks of their respective holders.
Copyright
All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into
any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written permission of Avision Inc.
Material scanned by this product may be protected by governmental
laws and other regulations, such as copyright laws, the customer is
solely responsible for complying with all such laws and regulations.
Warranty
The information contained in this document is subject to change
without notice.
Avision makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of fitness for a
particular purpose.
Avision shall not be liable for errors contained herein or for incidental
or consequential damages in connection with the furnishing,
performance, or use of this material.
ii
i
FCC Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communication. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
−Reorient or relocate the receiving antenna.
−Increase the separation between the equipment and receiver.
−Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
−Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, (example - use
only shield interface cables when connecting to computer or
peripheral devices). Any changes or modifications not expressly
approved by the manufacture of this device could void the user's
authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party: Avision Labs, Inc.
Telephone No.: +1 (510) 739-2369
i
v
TABLE OF CONTENTS
1. INTRODUCTION ................................................ 1-1
2. SCANNER INSTALLATION ............................... 2-1
2.1 PRECAUTIONS ............................................................. 2-1
2.2 UNLOCKING YOUR SCANNER......................................... 2-2
2.3 SETTING SCSI ID........................................................ 2-3
2.4 SETTING SCSI TERMINATOR........................................ 2-3
2.5 SETTING SCSI SYNC SWITCH ..................................... 2-5
2.6 CONNECTING THE CABLES ........................................... 2-6
2.7 PLACING YOUR ORIGINAL ............................................. 2-7
3. SCANNER DRIVER INSTALLATION................. 3-1
3.1 SYSTEM REQUIREMENTS.............................................. 3-1
3.2 INSTALLATION STEPS ................................................... 3-1
3.3 SCANNING WITH IMAGE EDITING SOFTWARE .................. 3-2
3.4 AGLANCE OF THE USER INTERFACE ............................. 3-4
4. EDITING YOUR IMAGE ..................................... 4-1
4.1 USING THE BASIC FEATURES ....................................... 4-1
4.1.1 Choosing Your Scan Method ....................... 4-1
4.1.2 Selecting a Proper Image Type .................... 4-2
4.1.3 Determining a Proper Resolution ................. 4-4
4.1.4 Adjusting the Brightness and Contrast ......... 4-5
4.1.5 Enlarging Previewed Image.......................... 4-6
4.1.6 Inverting and Selecting Your Image ............. 4-7
4.1.7 Enhancing Your Image ................................. 4-9
v
4.2 USING THE ADVANCED FEATURES ............................. 4-11
4.2.1 The Switch Button ...................................... 4-11
4.2.2 Adjusting Highlight/Shadow Levels ............ 4-12
4.2.3 Adjusting the Brightness Curve .................. 4-14
4.2.4 Changing Color Hue/Saturation/Lightness. 4-15
4.2.5 Using Color Balance................................... 4-16
4.2.6 Color Drop-out ............................................ 4-17
4.3 USING OTHER TOOLS ................................................. 4-18
5. CARE AND MAINTENANCE.............................. 5-1
5.1 CLEANING THE GLASS ................................................. 5-1
6. TROUBLESHOOTING........................................ 6-1
6.1 FREQUENTLY ASKED QUESTIONS ................................. 6-1
6.2 TECHNICAL SERVICE ................................................... 6-3
7. SPECIFICATIONS.............................................. 7-1
7.1 MODEL:FB6000E ..................................................... 7-1
INDEX ............................................................................A
1-1
1. INTRODUCTION
Congratulations on your purchase of the Avision’s A3-sized color
image scanner. Avision is one of the leading companies to make high
quality color image scanner.
To ensure the optimum performance of the scanner, please take a
few minutes to read through this manual before you install and
operate the new scanner. The manual contains valuable
information on how to unpack, install, operate, and maintain the
scanner properly.
Figure 1-1 in below shows how the scanner is packed. Please
check if all items are included. If there is any item missing or
damaged, please contact your nearest dealer immediately for
replacement.
1-2
1. Scanner main unit
2. Power adapter
3. Power cord
4. SCSI cable
5. User’s manual/CD/SCSI card
Figure 1-1 Scanner Packaging
Note: When you unpack the scanner, retain the packing
material and shipping box in case you may transport the
scanner in the future.
4
5
6
1
2
3
4
5
2-1
2. SCANNER INSTALLATION
2.1 PRECAUTIONS
¾Keep the scanner out of direct sunlight. Direct exposure to the
sun or excessive heat may cause damage to the unit.
¾Do not install the scanner in a humid or dusty place.
¾Be sure to use the proper AC power source.
¾Place the scanner securely on an even, flat surface. Tilted or
uneven surfaces may cause mechanical problems.
¾Keep the shipping box and the material in case you may need to
ship the scanner again.
2-2
2.2 UNLOCKING YOUR SCANNER
To protect the scanning unit from damage during transportation, a
lock switch is designed at the back of the scanner to keep the
scanning unit from moving. To unlock the scanner, move the lock
switch up as shown in Fig. 2-1.
Figure 2-1 Unlocking the Scanner
Figure 2-2 Home position
Note: If the scanning unit is not located at the front of the scanner
before transporting the scanner, be sure to do the follows:
1. Turn on the scanner.
2. The scanning unit should move to the front of the scanner.
3. Press the lock switch down to the “Lock position”.
4. The scanner is now ready to transport.
Unlocked
Locked
Scanning unit at this
position before
locking the scanner
2-3
2.3 SETTING SCSI ID
When you have several devices on a SCSI chain, you may have to
adjust the SCSI ID selector setting at the back of the scanner(See
Figure 2-2). This setting assigns a specific "device ID" to the
scanner. If the ID number is duplicated with an existing SCSI device
on the SCSI chain, please select a new ID#.
Note: The factory setting for the scanner is ID# 6. Usually, ID# 0 is
assigned to an internal hard disk drive, and ID# 7, to SCSI adapter or
host. ID# 8 and #9 are not in use.
2.4 SETTING SCSI TERMINATOR
The scanner is equipped with a built-in terminator switch on the rear
side of the scanner (See also Figure 2-2). Move the switch to the
“on” position to enable the SCSI termination or to the “off” position to
disable the SCSI termination. The SCSI termination ensures the
electrical signal flow through the SCSI chain properly.
As a result, if the scanner is the only or final device connected to
your computer, you should enable your SCSI chain terminates at the
scanner by moving the terminator switch to the “on” position. If your
scanner is linked between the host computer and other SCSI
devices, then the SCSI chain should terminate at the final SCSI
device. In the case, disable your SCSI termination on the scanner
by moving the terminator switch to “off” position.)
Table des matières
Autres manuels Avision Scanner
Avision
Avision 300500001 Manuel utilisateur
Avision
Avision BF-0606H Manuel utilisateur
Avision
Avision IS25 Manuel utilisateur
Avision
Avision FL-0912S Manuel utilisateur
Avision
Avision AD340G Manuel utilisateur
Avision
Avision AD3100 Series Manuel utilisateur
Avision
Avision AV620C Manuel utilisateur
Avision
Avision BT-0911S Manuel utilisateur
Avision
Avision BT-0911S Manuel utilisateur
Avision
Avision AD360GWN Manuel utilisateur
Avision
Avision FL1503B Manuel utilisateur
Avision
Avision FT-1109H Manuel utilisateur
Avision
Avision AV626C Manuel utilisateur
Avision
Avision AD345 Manuel utilisateur
Avision
Avision AV610 Manuel utilisateur
Avision
Avision FF-2110B Manuel utilisateur
Avision
Avision AN360W Manuel utilisateur
Avision
Avision DF-0510 Manuel utilisateur
Avision
Avision NETDELIVER @V5000 Manuel utilisateur
Avision
Avision AD6090N Manuel utilisateur
