AVGear AVG-HDWP70TX-B Manuel utilisateur
AVG-HDWP70TX-B
AVG
-
HDWP70TX
-
B
is a Decora style
transmitter that installs in a double-gang wall
box to provide a convenient interface for
HDMI/VGA input sources.
Features
Selectable HDMI/ VGA with audio input
Supports VGA output resolution up to
1920x1200
High bandwidth: 10.2Gbps
In-built scaler function, supports scaling
of HDMI/ VGA signals to match the native
resolution of the display
Transmits HDMI signals up to 4K
Compliant with HDMI 1.4, supports 1080p
3D
HDCP compliant, equipped with HDCP
auto-tracking function
Provides auto-switching capability
Supports multiple control methods
including front panel buttons, and RS232,
supports bi-directional RS232 pass-
through control.
Supports firmware upgrade via USB.
DC 12V power output
Powered by local power pack or PoC
connection up to 60m
Aluminum design for efficient cooling
AVG-HDWP70TX-B
PLEASE READ THIS PRODUCT MANUAL CAREFULLY
BEFORE USING THIS PRODUCT.
This manual is for operational use only, and not to be
used in a maintenance capacity. The functions
described in this version are current as at March 2015.
Any changes of functions and operational parameters
will be updated in future manual versions. Please refer
to your dealer for the latest product details.
Version 1.0 1/3/15
AVG-HDWP70TX-B
SAFETY OPERATION GUIDE
In order to guarantee the reliable operation of the equipment and safety of the
user, please abide by the following procedures in installation, use and
maintenance:
1. The system must be earthed properly. Please do not use two blade plugs
and ensure the AC power supply ranges from 100v to 240v and from 50Hz
to 60Hz.
2. Do not install the switcher in an environment where it will be exposed to
extreme hot or cold temperatures.
3. This unit will generate heat during operation, please ensure that you allow
adequate ventilation to ensure reliable operation.
4. Please disconnect the unit from mains power if it will be left unused for a
long time.
5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to
repair the unit. Opening the unit will void the warranty. There are high
voltage components in the unit and attempting to repair the unit could result
in serious injury.
6. Do not allow the unit to come into contact with any liquid as that could result
in personal injury and product failure.
AVG-HDWP70TX-B
TABLE OF CONTENTS
Introduction ..............................................................................................................1
Introduction to the AVG-HDWP70TX-B .......................................................1.1
Features .......................................................................................................1.2
Package List ................ ……………………………………………………………………2
Product Appearance ................................................................................................3
Front Panel...................................................................................................3.1
Side Panel ....................................................................................................3.2
Rear Panel....................................................................................................3.3
System Connection..................................................................................................4
System Application .......................................................................................4.1
Usage Precautions .......................................................................................4.2
Connection Diagram.....................................................................................4.3
Connection Procedure.................................................................................. 4.4
12V DC Output .............................................................................................4.5
PoC Solution.................................................................................................4.6
Operations ................................................................................................................5
Operations of front panel buttons .................................................................5.1
RS232 Control..............................................................................................5.2
Installation/removal of RS232 Control Software ................................ 5.2.1
Basic Settings.................................................................................... 5.2.2
RS232 Communication Commands .................................................. 5.2.3
Specification.............................................................................................................6
Panel Drawing ..........................................................................................................7
Troubleshooting & Maintenance.............................................................................8
AVG-HDWP70TX-B
1. Introduction
1.1. Introduction to the AVG-HDWP70TX-B
AVG-HDWP70TX-B is a Decora style transmitter that installs in a double-gang wall
box to provide a convenient interface for HDMI / VGA input sources. It has 1 HDMI
IN, 1 VGA IN, Audio IN and 1 HDBaseT OUT with PoC. It supports VGA with a full
HD scaler, and HDMI 1.4 with 4k& 3D. Input signals support auto-switching and
manual-switching. The HDBaseT output supports 60m UHD video transmission with
PoC, it enables bi-directional RS232 communication between the Scaler Wall Plate
HDBaseT Transmitter-B and a remote device.
With its PoC solution, AVG-HDWP70TX-B can be powered by a far-end PoC
receiver.
1.2. Features
Selectable HDMI/ VGA with audio input
Supports VGA output resolution up to 1920x1200
High bandwidth: 10.2Gbps
In-built scaler function, supports scaling HDMI/ VGA signals to match the native
resolution of the display
Transmits HDMI signals up to 4K
Compliant with HDMI 1.4, supports 1080p 3D
HDCP compliant, equipped with HDCP auto-tracking function
Provides auto-switching capability
Supports multiple control methods including front panel buttons, and RS232,
supports bi-directional RS232 pass-through control.
Supports firmware upgrading via USB.
DC 12V power output
Powered by local power pack or PoC connection up to 60m
Aluminum design for efficient cooling
AVG-HDWP70TX-B
2. Package List
1 x AVG-HDWP70TX-B
4 x Screws (for AVG-HDWP70TX-B )
3 x Pluggable Terminal Blocks (1 2-pin block, 1 3-pin block, and 1 4-pin block)
1 x Face Plate (Selectable)
4 x Screws (for the face plate)
1 x Power Adapter (DC 12V 2A, selectable)
1 x User Manual
Note: Please confirm if the product and the accessories are all included, if not,
please contact your dealer.
AVG-HDWP70TX-B
3. Product Appearance
3.1. Front Panel
No. Name Description
①
Power
indicator
Illuminates red when power is on
②SOURCE/
AUTO
Used as video source selection button (with backlight
off):
Press to select one source, press again to select
next source, switching circularly between HDMI and
VGA. The indicator of the selected input source will
illuminate green.
Used as switching mode selection button (with
backlight on):
Press and hold for 3 seconds or more to enter in
Auto-switching mode, the indicator illuminates green
when in auto-switching mode. Press and hold for 3
seconds or more again to enter in Manual-switching
mode.
③RS232
Serial port, 3-pin pluggable terminal block, connects
with the control terminal to control the Scaler Wall Plate
HDBaseT Transmitter-B, supports bi-directional RS232
control (send control signals from local device or
receive control signals sent from far-end devices).
④
VGA IN
Connect with VGA source device.
The indicator:
illuminate
s
yellow when there is VGA signal input
AVG-HDWP70TX-B
illuminate
s
green when the signal source is chosen
as input source
turn
s
off when there is no VGA input signal
⑤
AUDIO IN
Connect with the audio output socket of VGA source
device, delivers synchronous audio with the VGA signal
source when choosing VGA as source signal.
⑥HDMI IN
Connect with HDMI source device.
The indicator:
illuminates yellow when there is HDMI signal input
illuminates green when the signal source is chosen
as input source
turn
s
off when there is no HDMI input signal
⑦
LINK &HDCP
LINK: Twisted Pair Link status indicator
, illuminate
s
green when successfully connected.
HDCP: HDCP compliance indicator, illuminates
green when the source signals contains HDCP;
blinks when there is no HDCP. Turns off when there
is no source signal.
⑧
RESET Press the button to reboot the Scaler Wall Plate
HDBaseT Transmitter-B.
⑨
FIRMWARE
USB port, used for firmware update
Plug a flash disk or other storage device with update
file (MERGE.bin), and send the command 50698% to
update the firmware.
Note: Pictures shown in this manual are for reference only.
AVG-HDWP70TX-B
3.2. Side Panel
No. Name
Description
①HDBaseT
OUT
RJ45 port, connect with receiver via a CAT5e/6 cable to deliver
Audio/ Video signals, supports PoC
Note: Pictures shown in this manual are for reference only.
Note: AVG-HDWP70TX-B supports unidirectional PoC, i.e. it can be powered from
the far-end receiver but it can’t power the far-end receiver.
3.3. Rear Panel
No.
Name
Description
①Power In Power in port, 2-pin pluggable terminal block, connect with DC
12V power adapter
②Power Out 12V DC power output for powering 3
rd
party devices
③RS232
Serial port, connects with a far-end receiver, supports bi-
directional RS232 control (sends control signal from local or
receives control signal sent from far-end devices).
Note: Pictures shown in this manual are for reference only.
AVG-HDWP70TX-B
4. System Connection
4.1. System Applications
Reliable performance for control and transmission makes the AVG-HDWP70TX-B
ideal in the IT computer space, signal monitoring, big screen displays, conference
systems, television broadcast, education, banking and security institutions etc.
4.2. Usage Precautions
1. System should be installed in a clean environment with temperature and humidity
maintained to within equipment specification.
2. All of the power switches, plugs, sockets and power cords should be insulated
and safe.
3. All devices should be connected before power is turned on.
4.3. Connection Diagram
Note: Pictures shown in this manual are for reference only.
Autres manuels pour AVG-HDWP70TX-B
1
Table des matières
Autres manuels AVGear Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
