Avery Dennison Monarch 9460 Manuel de service

Monarch

9460™

Printer

System

Administrator's

Guide

System

Administrator's

Guide

Each product and program carries a respective written warranty, the only warranty on

which the customer can rely. Paxar reserves the right to make changes in the product, the

programs, and their availability at any time and without notice. Although Paxar has made

every effort to provide complete and accurate information in this manual, Paxar shall not be

liable for any omissions or inaccuracies. Any update will be incorporated in a later edition

of this manual.

part of this publication may be reproduced, transmitted, stored in a retrieval system, or

translated into any language in any form by any means, without the prior written permission

of Paxar Americas, Inc.

Trademarks

9433, 9462, 9465, Monarch®, MPCL, and Sierra Sport are trademarks of Paxar Americas, Inc.

The Bluetooth® trademarks are owned by Bluetooth SIG, Inc.

Paxar® is a trademark of Paxar Corporation.

Avery Dennison® is a trademark of Avery Dennison Corporation.

Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.

Avery Dennison Printer Systems Division

170 Monarch Lane

Miamisburg, Ohio 45342

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

RF Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference including interference that

may cause undesired operation of the device.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le

brouillage radioélectrique édicte par le ministère des Communications du Canada.

TABLE OF CONTENTS

INTRODUCTION ......................................................................... 1-1

Using This Manual.................................................................. 1-1

Audience ............................................................................... 1-1

Using the Menu Charts ........................................................... 1-2

Using the Display and Buttons................................................. 1-2

Selecting an Option ............................................................. 1-3

Exiting an Option................................................................. 1-3

Printing ................................................................................. 1-4

Selecting a Language ............................................................. 1-5

USING DIAGNOSTICS ................................................................ 2-1

Diagnostics............................................................................ 2-1

Printer ................................................................................ 2-3

Test Label........................................................................... 2-3

Sensors .............................................................................. 2-6

Printhead ............................................................................ 2-8

Battery................................................................................ 2-9

View Totals ......................................................................... 2-9

Display ............................................................................. 2-10

Keyboard .......................................................................... 2-11

Communications ................................................................ 2-12

RAM ................................................................................. 2-13

Data Dump........................................................................ 2-14

About ............................................................................... 2-15

Online Diagnostics ............................................................... 2-15

Service Diagnostics .............................................................. 2-16

File System.......................................................................... 2-16

SETTING UP THE PRINTER ........................................................ 3-1

Stock Energy ......................................................................... 3-3

Backlight ............................................................................... 3-4

LCD Contrast ......................................................................... 3-5

Printer ................................................................................... 3-6

Adjusting the Print Contrast.................................................. 3-7

Adjusting the Supply Position ............................................... 3-8

Adjusting the Print Position .................................................. 3-9

Setting the Margin Adjust ................................................... 3-10

Setting the Demand Sensor................................................ 3-11

Setting the Stock Sensor.................................................... 3-14

Selecting the Die Cut Sensor.............................................. 3-15

Selecting the Black Mark Sensor ........................................ 3-16

Selecting the Non-Indexed Sensor ...................................... 3-18

Selecting the Aperture Sensor ............................................ 3-19

Serial Communications ......................................................... 3-21

Baud Rate......................................................................... 3-22

Parity ............................................................................... 3-22

Data Bits........................................................................... 3-23

Stop Bits........................................................................... 3-23

Flow Control...................................................................... 3-24

Power Management .............................................................. 3-25

Low Power (Sleep Mode).................................................... 3-25

Shut Down ........................................................................ 3-26

iii

RF Network.......................................................................... 3-26

About Bluetooth® ................................................................. 3-27

Defaults ............................................................................ 3-28

Changing the Communication Settings ................................ 3-28

Bluetooth Settings ................................................................ 3-28

Enabling the Security......................................................... 3-29

Changing the PIN .............................................................. 3-30

Local Name....................................................................... 3-31

Local Address ................................................................... 3-32

Printing Info ...................................................................... 3-32

Introduction 1-1

INTRODUCTION

Use this System Administrator's Guide for the Monarch® Sierra

Sport2™ 9460™ printer. Review the printer information in the Operator's

Handbook available on our Web site (www.paxar.com) before you read

this manual.

Note: Information in this document supercedes information in previous

versions. Check our Web site for the latest documentation and

release information.

Using This Manual

Following is a summary of the contents of this manual.

Chapter Contents

1 Introduction Information you should know before using the printer.

2 Using

Diagnostics

Using printer diagnostics to print test labels, check

sensors, view inches printed, etc.

3 Setting Up the

Printer

Using the setup menu to adjust the supply and printer

settings.

Audience

The System Administrator's Guide is for the person who sets up the

printer and changes the configuration.

1-2 System Administrator’s Guide

Using the Menu Charts

The chapters in this manual have one or more charts showing the

printer's menu structure. For example:

Main Menu

The black boxes show where you are; the bordered boxes show how you

got there.

Using the Display and Buttons

P Turns the printer on and off.

F Advances the supply or returns the display to the next higher

menu.

A Three navigation buttons for selecting options on the display.

Tool Box Language Exit

Diagnostics Online Diag. Setup Service File System Exit

Exit

Stock Energy Backlight LCD Contrast Printer Serial Comm. Power Mgmt. RF Network

Bluetooth

Display

On/Off Button

Feed/Ready

Button

Navigation

Buttons

Introduction 1-3

The following table describes the icons you may see on the display:

When you see Press the NAVIGATION Abutton under the icon as

described

↵Selects (enters) the highlighted option.

cScrolls up through the list of options.

dScrolls down through the list of options.

fSets the change position.

+ Toggles between positive and negative values.

Increases the selected setting in 1-step increments.

Increases the selected setting in 10-step increments.

- Decreases the selected setting in 5-step increments.

XClears an error.

Returns the display to the next higher menu.

Selecting an Option

To display menu options, press any A.

♦ When the display shows a down arrow, press Aunder dto scroll

down through the list of options.

Diagnostics

Online Diag.

↵d

♦ When the displays shows an up arrow, press Aunder cto scroll up

through the list of options.

Online Diag.

Setup

↵cd

♦ When the option you want is highlighted, press Aunder ↵(enter) to

select it.

Exiting an Option

To exit an option, press Fonce. You return to the next higher menu.

When you press F, you lose any entries you have made since the last

time you pressed Aunder ↵.

1-4 System Administrator’s Guide

Printing

The host sends online packets containing print jobs to the printer.

1. Turn on the printer. Press and hold Puntil the display turns on.

The display flashes printer version information, battery charging

status, and then you see

Ready

2. Download a format and a batch.

For information on creating packets and downloading print jobs,

refer to the Programmer's Manual available on our Web site

(www.paxar.com).

The printer prints either a strip of supplies (non-peel mode) or

one at a time (peel/on-demand mode).

3. Remove the printed supplies.

Autres manuels pour Monarch 9460

Table des matières

Autres manuels Avery Dennison Imprimante

Avery Dennison

Avery Dennison Monarch 9906 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch SIERRA SPORT4 9493 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9825 Manuel utilisateur

Avery Dennison

Avery Dennison Wireless Ethernet Print Server Monarch 7411 Manuel utilisateur

Avery Dennison

Avery Dennison TC9820PHI Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9419 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch Pathfinder Ultra Platinum 6039 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9433 Sierra Sport3 Manuel de service

Avery Dennison

Avery Dennison Platinum 6039 Manuel du propriétaire

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9825 Manuel utilisateur

Avery Dennison

Avery Dennison 9444 Manuel utilisateur

Avery Dennison

Avery Dennison SNAP 700 Manuel d'utilisation

Avery Dennison

Avery Dennison Monarch 9460 SNP Manuel de service

Avery Dennison

Avery Dennison Monarch 9419 Manuel de service

Avery Dennison

Avery Dennison AP4.4 Manuel utilisateur

Avery Dennison

Avery Dennison SNAP 500 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9493 SNP Manuel de service

Avery Dennison

Avery Dennison Monarch ADTP2 EcoCut Manuel de service

Avery Dennison

Avery Dennison FRESHMARX 9416 Document technique

Avery Dennison

Avery Dennison 9486 Manuel utilisateur

Avery Dennison

Avery Dennison AP 2.4 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 2 Manuel d'utilisation et d'entretien

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur