Avery Dennison SNAP 700 Manuel utilisateur

User’s Manual—SNAP™ 700 Printer

User’s Manual

SNAP

700 Printer

SNAP

700RFID Printer

Avery Dennison

Information and Brand Management Division

Retail Information Servi es Group

Manual Edition 4.2

1 May 2013

Manual Part Number 621398

All manuals and user guides at all-guides.com

all-guides.com

User’s Manual—SNAP™ 700 Printer

WARNING

This device complies with Part 15 of the F Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference that may cause undesired operations.

This lass A digital apparatus meets all requirements of the anadian Interference

ausing Equipment Regulations. et appareil numerique de la classe A respecte

toutes les

exigences du Reglement sur le material

broilleur du anada

All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

Table of Contents

1.0 INTRODUCTION 9

2.0 INSTALLATION 10

2.1 Preparing for the installation 10

2.1.1 AC Power Line 10

2.1.2 Location Considerations 10

2.1.3 PC Requirements 11

2.1.4 User Safety 12

2.2 Receiving 12

2.3 Unpacking 13

2.3.1 Removin the printer from the carton 13

2.3.2 Inspection / Inventory Checklist 14

2.4 Printer Description 15

2.5 Setting up the Printer 17

2.5.1 Attachin the Stacker 17

2.5.2 Checkin the Main Fuse Confi uration 18

2.5.3 Installin the Power Cord 19

2.5.4 Installin the PC Interface Cable 19

2.5.5 Installin PCMate Platinum Software 20

2. Printing a Test Label 20

2.6.1 Loadin Supplies 20

2.6.2 Turnin the Printer on 20

2.6.2 Selectin the Test Format 20

2.6.3 Printin the Test Labels 21

3.0 OPERATION 22

3.1 Loading Supplies 22

3.1.1 Installin Ink to the Top Ink Supply Station 22

3.1.2 Installin Ink to the Bottom Ink Supply Station 26

3.1.3 Loadin the Stock 26

3.1.4 Butt Splice 28

3.2 Sending a Print Job to the Printer 28

3.3 Printing Labels 29

3.3.1 The Control Panel 29

3.3.2 Printin 30

All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

3.3.2.1 Handlin the Leader 30

3.3.3 Errors 30

3.3.4 End of Day 31

3.3.5 Clearin Print Jobs 31

3.3.6 Usin Pre-Printed Stock 31

3.3.6.1 Selectin the Sensor 33

3.3.6.2 Ali nin the Stock to the Sensor 33

3.3.6.3 Ali nin the Sensor to the Stock 33

3.3.7 Feedin the stock 34

3.4 Option Menu System 34

3.4.1 Runnin Test Patterns 35

3.4.3 Settin / Adjustin Voice Button Volume 37

4.0 MAKING ADJUSTMENTS 39

4.1 Print Head Adjustments 39

4.1.1 Adjustin Print Head Pressure 39

4.1.2 Adjustin Density (Darkness) 40

4.2 Adjusting the Stacker 40

4.2.1 Stacker Position 41

4.2.2 To le Switch 41

4.2.3 Stacker An le 41

4.2.4 Platform 42

4.3 Print and Cut Adjustments 43

4.3.1 Cut Adjust 43

4.3.2 Print Adjust 43

4.4 Printer Features 44

4.4.1 Selectin the Printer Lan ua e 44

4.4.2 Settin the Date and Time 44

4.4.3 Enablin or Disablin the Cutter 44

4.4.4 Selectin the Print Speed 45

4.4.5 Selectin the Fla in Mode 45

4.4.6 Selectin the Sense Mark Type 45

4.4.7 Settin the Default Transfer Type 46

4.4.8 Viewin the Life Counts 46

5.0 MAINTENANCE 47

5.1 Print Head Cleaning and Handling 47

5.1.1 Handlin Techniques 47

5.1.2 Cleanin Procedures 48

5.2 Print Head Replacement 49

5.3 Lubrication 52

All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

5.4 Rotary Knife Assembly 52

5.4.1 Removin and Replacin the Knife Assembly 53

5.4.2 Adjust the Knife Home Position 56

5.5 Rubber Roller Replacement 56

6.0 SERVICE ADJUSTMENTS 57

6.1 Stock (Web) Guide Position 57

6.2 Stock (Web) Guide Width Adjustments 57

6.3 Stock Feed 57

6.4 Knife Shear Adjustment 57

7.0 REMOTE CONTROL / DISPLAY MODULE 60

8.0 VIRTUAL CONTROL PANEL 61

8.1 Viewin and Chan in Printer Settin s 62

9.0 UPGRADING THE PRINTER SOFTWARE 63

9.1 Introduction 3

9.2 What is Needed 3

9.3 Getting the UPG file 3

9.3.1 Usin Avery Dennison Online to et the UPG file 63

9.3.2 Orderin the UPG file on CD 63

9.4 Getting Ready to Upgrade the Printer 3

9.5 Performing the Upgrade 4

10.0 ELECTRICAL TROUBLESHOOTING 67

10.1 Power Up / Sign On / Communications 7

10.2 Stock / Ink Advance 9

10.3 Print 70

10.4 Cut / Stack 72

10.5 Printer Errors 73

11.0 MECHANICAL TROUBLESHOOTING 79

11.1 Stock 79

11.2 Ink 80

11.3 Print 80

All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

11.4 Knife 80

APPENDICES 83

1. Fuse Configuration 83

2. Ink and Stock Transfer Types 84

3. Printer Specifications 8

4. Instructions for Factory / Field Installation of Top Sensor Assemblies 2000 & 20007

Installation Procedure 88

5. Programming the Contrast Sensors 92

Pro rammin the Contrast Sensor 93

Pro rammin the Color Contrast Sensor 94

. Instructions for Factory / Field Installation of High Speed Verifier Assembly 20008F

(Factory) and 20008 (Field) 9

Installation Procedure - Mechanical 96

Installation Procedure - Electrical 98

Installation – Rear Cover 99

7. Warranty Policy 100

Service 101

8. Option Menu System Flowchart 102

ELECTRICAL DRAWINGS 103

Electrical System Schematic 104

Harness Connections 105

MECHANICAL ASSEMBLY DRAWINGS 107

Unwind Assembly 108

Unwind Parts List 109

Unwind Assembly RFID 3” / 4” 110

Unwind Parts List RFID 3” / 4” 111

Decurler Assembly 112

Decurler Parts List 113

Web Guide Assembly 114

All manuals and user guides at all-guides.com

all-guides.com

User’s Manual—SNAP™ 700 Printer

Web Guide Parts List 115

Sensor Tray Assembly 11

Sensor Tray Parts List 117

Sensor Tray Assembly RFID 118

Sensor Tray RFID Parts List 119

Top Print Head Assembly 120

Top Print Head Parts List 121

Bottom Print Head Assembly 122

Bottom Print Head Parts List 123

Print Head Assembly 124

Print Head Parts List 125

Platen Roller Assembly 12

Platen Roller Parts List 127

Ink Arbor Assembly 128

Ink Arbor Parts List 129

Drive Assembly 130

Drive Parts List 131

Knife Assembly 132

Knife Parts List 133

Nip Roller Assembly 134

Nip Roller Parts List 135

Knife / Drive Motors Assembly 13

Knife / Drive Motors Parts List 137

Knife / Drive Motors Assembly RFID 138

Knife / Drive Motors RFID Parts List 139

Upright Frame Assembly 140

All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

Upright Frame Parts List 141

Covers Assembly 142

Covers Parts List 143

Stacker Assembly (Sheet 1 of 2) 144

Stacker Assembly (Sheet 2 of 2) 145

Stacker Parts List 14

Addendum – Printing and Supplies Handling Procedure 147

Addendum II – Short Feed 149

Short Feed O-Rin Replacement 149

Short Feed Assembly Parts List 151

Short Feed Part List 152

Revision Record 154

All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

1.0 Introdu tion

AVERY DENNISON has designed the SNAP

700 printer for ease of installation,

si ple operation, low cost of ownership, and dependability. The SNAP 700

printer is capable of printing two-sided brand/care labels at a rate of up to 12

inches (305 ) per second. Your SNAP 700 printer allows for quick change-

outs of inks, stock, and label sizes, providing the versatility required to eet

ost brand/care labeling needs. Finally, the SNAP 700 printer supports various

options including RFID.

This anual guides the printer operator as an easy-to-use, quick-reference guide.

It contains procedures for receiving, handling, set-up, installation, operation, and

aintenance of the SNAP 700 printer.

Please read this section of the anual to fa iliarize yourself with the printer and

to guide you through the initial receiving and set-up of your new SNAP 700

printer. Throughout this anual, a syste of

NOTES, CAUTIONS, and

WARNINGS identify key infor ation to ensure your personal safety and to

proper printer operation. Please review these carefully.

We also strongly suggest that you watch the 17-minute training video, which is

available on the D2Comm web site. Refer to the documentation included with

the rinter for more details.

NOTES all attention to information that is espe ially

signifi ant to understanding and operating the equipment.

CAUTION noti es inform you of a tions or situations in

whi h the printer might be damaged.

WARNING noti es des ribe situations in whi h la k of

attention or insuffi ient equipment knowledge ould ause

either personal injury or damage to the printer.





All manuals and user guides at all-guides.com

User’s Manual—SNAP™ 700 Printer

2.0 Installation

2.1 Preparing for the installation

2.1.1 AC Power Line

NOTE: AVERY DENNISON requires that the minimum

ele tri al servi e be 10 Amps @ 115VAC or 6 Amps @

230VAC. This will allow you to plug the SNAP 700 printer,

PC, and any additional support or servi e equipment into

the same servi e. We highly re ommend that the printer

and its a essories be on a dedi ated ir uit.

The electrical service supplying power to the SNAP 700 printer or to peripheral

equip ent connected to the SNAP 700 printer should eet standard electrical

code practices, including proper grounding and neutrals.

2.1.2 Lo ation Considerations

The SNAP 700 printer weighs 60 pounds (27.2 Kg) and requires a table of

sufficient quality and strength to handle this load. The printer requires an area

of approxi ately 72" wide x 30" deep x 32" high (1.8 x 76 c x 81 c ). The

host PC (if used) and any printer options will increase the required area. AVERY

DENNISON reco ends using an industrial type worktable. Refer to Figure 1

below.

The SNAP 700 printer is designed for easy operator accessibility to the printer

controls and co ponents. Select your SNAP 700 printer’s location to eet the

following criteria:

1. Physical de ands on the operator will dictate proper height of the table

supporting the printer. Ensure the operator has co fortable access to the

printer. Refer to Figure 1.

2. Allow enough space for s ooth flow of aterials that the operator will

load on the printer as well as space for processing the finished product

fro the printer.

3. While AVERY DENNISON has designed the printer to be reasonably

quiet, select an area where repetitious noise fro printing and cutting

processes is acceptable.

CAUTION: Ea h ustomer must take responsibility to

ensure the workstation reated for the SNAP 500 printer

meets the re ommended requirements to ensure optimal

operation of the printer.



All manuals and user guides at all-guides.com

Autres manuels pour SNAP 700

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Avery Dennison Étiqueteuse

Avery Dennison

Avery Dennison ALS 204 Manuel utilisateur

Avery Dennison

Avery Dennison 221 RH Manuel utilisateur

Avery Dennison

Avery Dennison S 105 Manuel utilisateur

Avery Dennison

Avery Dennison PB-XL Manuel utilisateur

Avery Dennison

Avery Dennison ALX 720 Manuel utilisateur

Avery Dennison

Avery Dennison ALX 92x Manuel utilisateur

Avery Dennison

Avery Dennison Label Printer Manuel utilisateur

Avery Dennison

Avery Dennison ALS 330/430 Manuel utilisateur

Avery Dennison

Avery Dennison AP5.4 Manuel utilisateur

Avery Dennison

Avery Dennison ALS 221 Manuel utilisateur

Avery Dennison

Avery Dennison LA-SO Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9860 Manuel utilisateur

Avery Dennison

Avery Dennison AP3.4 Guide de dépannage

Avery Dennison

Avery Dennison Monarch 9844 Manuel de service

Avery Dennison

Avery Dennison 64 Series Manuel utilisateur

Avery Dennison

Avery Dennison TTX 450 Guide de dépannage

Avery Dennison

Avery Dennison AP7.t Manuel d'instructions

Avery Dennison

Avery Dennison ALX 92x Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 1130 Manuel utilisateur

Avery Dennison

Avery Dennison ALX 92x Manuel utilisateur

Avery Dennison

Avery Dennison ALS 204 Manuel utilisateur

Avery Dennison

Avery Dennison MONARCH 9417+ Manuel utilisateur

Avery Dennison

Avery Dennison ALX 92x Manuel utilisateur

Avery Dennison

Avery Dennison ALS 230 Manuel utilisateur

Manuels Étiqueteuse populaires d'autres marques

Brother

Brother P-Touch 2420PC Manuel utilisateur

newell

newell Dymo LabelManager 210D Manuel utilisateur

Brother

Brother TD-4000 Manuel utilisateur

U-Line

U-Line BROTHER H-8754 Manuel utilisateur

Tharo Systems

Tharo Systems H-435+ Manuel utilisateur

Brother

Brother E300 Manuel utilisateur

Godex

Godex RT700 SERIES Manuel utilisateur

ID Technology

ID Technology 252 Manuel utilisateur

Labelmate

Labelmate MC-11 Manuel utilisateur

CAB

CAB XD4M/300 Manuel utilisateur

Brother

Brother P-touch PT-9700PC Manuel utilisateur

TSC

TSC PEX1000 Series Manuel utilisateur

Adkins

Adkins Label Master Manuel utilisateur

Epson

Epson LabelWorks LW-400 Manuel utilisateur

Primera

Primera 510212 Manuel utilisateur

Brady

Brady BradyPrinter S3100 Manuel utilisateur

DuraLabel

DuraLabel LabPRO Manuel utilisateur

Novexx Solutions

Novexx Solutions XLP 604 Manuel utilisateur