Avalue Technology EAX-Q77 Manuel utilisateur

Part No: E2017AQ7701R

EAX-Q77

Intel® Q77 with Core™ i7/ i5/ i3 ATX Motherboard

Quick Installation Guide

2nd Ed –12 March 2014

EAX-Q77 Quick Installation Guide

2EAX-Q77 Quick Installation Guide

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Disclaimer

Avalue Technology Inc. reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve

design and/or performance. Avalue Technology assumes no responsibility or liability for the

use of the described product(s), conveys no license or title under any patent, copyright, or

masks work rights to these products, and makes no representations or warranties that

these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. Avalue Technology Inc. makes no representation or warranty that such

application will be suitable for the specified use without further testing or modification.

EAX-Q77 Quick Installation Guide

EAX-Q77 Quick Installation Guide 3

Getting Started

1.1 Safety Precautions

Warning!

Always disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden

power surges. Only experienced electronics personnel should open

the PC chassis.

Caution!

Always ground yourself to remove any static charge before touching

the CPU card. Modern electronic devices are very sensitive to static

electric charges. As a safety precaution, use a grounding wrist strap

at all times. Place all electronic components in a static-dissipative

surface or static-shielded bag when they are not in the chassis

1.2 Packing List

Before you begin installing the single board, make sure that the following materials are

included in the package:

1 x EAX-Q77 ATX Motherboard

1 x CD-ROM contains OS drivers/QIG/User’s Manual

2 x COM cable

2 x SATA cable

1 x I/O shield

EAX-Q77 Quick Installation Guide

4EAX-Q77 Quick Installation Guide

Hardware Installation

2.1 Before Installation

Before installing the motherboard, take note of the following considerations and safety

information.

Warning!

Always disconnect the power cord from the chassis before

working on the motherboard.

Only experienced electronics personnel should open the

PC chassis.

1. Ensure that the motherboard can fit into the chassis.

2. Always unplug the power cord before installing or removing the motherboard or

any of its components.

3. Use a grounded wrist strap or touch a grounded object before handling any of the

components.

4. When attaching screws to secure the motherboard to the chassis, do not over

tighten the screws to avoid damaging the motherboard.

EAX-Q77 Quick Installation Guide

EAX-Q77 Quick Installation Guide 5

2.2 Installing the CPU

Perform the following steps to install the CPU:

Note: Before installing the CPU, ensure that the surface of the CPU is clean and

the pins are not bent.

1. Press the lever and slide it out of the hook.

2. Lift to open the socket cover.

3. Install the CPU making sure the gold triangle is located in the correct direction.

EAX-Q77 Quick Installation Guide

6EAX-Q77 Quick Installation Guide

Warning!

Do not force to insert the CPU into the socket. If the CPU

does not fit, check for proper orientation. Forcing the CPU

into the socket may damage the CPU.

4. Close the socket cover.

5. Press the lever down and slide it under the hook.

EAX-Q77 Quick Installation Guide

EAX-Q77 Quick Installation Guide 7

2.3 Installing the CPU Fan and Heat Sink

Perform the following steps to install the CPU fan and heat sink:

1. Apply the thermal grease onto the center of the CPU socket surface.

2. Align and install the CPU fan and heat sink.

3. Tighten the heat sink screws.

EAX-Q77 Quick Installation Guide

8EAX-Q77 Quick Installation Guide

4. Connect the fan header onto the CPU fan connector on the motherboard.

Note: Make sure the heat sink and the CPU top surface are in total contact to

avoid CPU overheating problems that may cause the system to hang or be

unstable.

EAX-Q77 Quick Installation Guide

EAX-Q77 Quick Installation Guide 9

2.4 Installing a Memory Module

EAX-Q77 provides four (4) 240-pin DDR3 Dual In-Line Memory Module (DIMM) sockets

which support data transfer rates of 1333 and 1600 MT/sec. The total maximum memory

size is 32 GB.

Perform the following steps to install a memory module to the motherboard:

1. Press the retaining clips outwards.

2. Align a memory module on the slot taking note of the break on the module and the slot.

3. Insert the memory module completely until the retaining clips at both ends lock up and

the memory module is seated in place.

Note:

(1) Do not change any of the DDR3 DIMM parameters in BIOS setup without

acquiring technical information in advance.

(2) Static electricity can damage the electronic components of the computer or the

optional boards. Before starting these procedures, ensure that you are

discharged of static electricity by touching a grounded metal object briefly.

EAX-Q77 Quick Installation Guide

10 EAX-Q77 Quick Installation Guide

2.5 Jumper and Connector List

2.5.1 Jumper List

You can configure your board to match the needs of your application by setting jumpers. A

jumper is the simplest kind of electric switch.

It consists of two metal pins and a small metal clip (often protected by a plastic cover) that

slides over the pins to connect them. To “close” a jumper, connect the pins with the clip. To

“open” a jumper, remove the clip. Sometimes a jumper has three pins, labeled 1, 2, and 3.

In this case, connect either two pins.

The jumper settings are schematically depicted in this manual as follows:

A pair of needle-nose pliers may be helpful when working with jumpers.

Connectors on the board are linked to external devices such as hard disk drives, a

keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to

configure your system to suit your application.

If you have any doubts about the best hardware configuration for your application, contact

your local distributor or sales representative before you make any changes.

The following table lists the jumpers on your board.

Label

Function

CLR_CMOS

Clear CMOS

JRS1

Serial port1, RS232 / RS422 / RS485 function select

JRS2

Serial port1, RS232 / RS422 / RS485 signal select

JRS3

Serial port1, RS232 / RS422 signal select

JCOM2

Power Select Jumper, +5V / +12V power select

AT_CN

Power Mode Select Jumper, AT / ATX power mode select

ME_DIS

ME Update Firmware Jumper

GP15_CPT

GPIO_CN

Autres manuels pour EAX-Q77

Table des matières

Autres manuels Avalue Technology Carte mère

Avalue Technology

Avalue Technology AMD Geode E2047551001R Manuel utilisateur

Avalue Technology

Avalue Technology EMX-H110KP Manuel utilisateur

Avalue Technology

Avalue Technology ACP-PNVDV-A1-DCR Manuel utilisateur

Avalue Technology

Avalue Technology EMX-PNV Manuel utilisateur

Avalue Technology

Avalue Technology EMX-Q170KP Manuel utilisateur

Avalue Technology

Avalue Technology EAX-C236KP Manuel utilisateur

Avalue Technology

Avalue Technology ECM-APL2 Manuel

Avalue Technology

Avalue Technology EMX-Q87 Manuel utilisateur

Avalue Technology

Avalue Technology ECM-PNV Manuel utilisateur

Avalue Technology

Avalue Technology RSC-IMX61 Manuel utilisateur

Avalue Technology

Avalue Technology EAX-Q170P Manuel utilisateur

Avalue Technology

Avalue Technology EMX-H310C Manuel utilisateur

Avalue Technology

Avalue Technology EMX-QM77 Manuel utilisateur

Avalue Technology

Avalue Technology EMX-QM77 Manuel utilisateur

Avalue Technology

Avalue Technology ACP-PNVDV-A1-ATXR Manuel utilisateur

Avalue Technology

Avalue Technology EMX-SKLUC Manuel utilisateur

Avalue Technology

Avalue Technology ERX-W480P Manuel utilisateur

Avalue Technology

Avalue Technology ERX-G41 Manuel utilisateur

Avalue Technology

Avalue Technology ECM-QM77 Manuel utilisateur

Avalue Technology

Avalue Technology EMX-H61B series Manuel utilisateur

Avalue Technology

Avalue Technology ECM-APL2-B1 Manuel utilisateur

Avalue Technology

Avalue Technology XTX-PNV Manuel utilisateur

Avalue Technology

Avalue Technology ECMG3-Q170 Manuel utilisateur

Avalue Technology

Avalue Technology EMX-H110P Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur