Avalue Technology AMD Geode E2047551001R Manuel utilisateur

Part No. E2047551001R

ECM-5510

5.25" AMD Geode GX466 333 MHz Mini Module with 128 MB

DDR SDRAM Onboard, VGA, LVDS, Audio, LAN, CF,

PC/104, PCI, 4 COM, 4 USB 1.1 & GPIO

User’s Manual

2nd Ed – 19 January 2007

ECM-5510

2 ECM-5510 User’s Manual

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

User’s Manual

ECM-5510 User’s Manual

Disclaimer

Avalue Technology Inc. reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve

design and/or performance. Avalue Technology assumes no responsibility or liability for the

use of the described product(s), conveys no license or title under any patent, copyright, or

masks work rights to these products, and makes no representations or warranties that

these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. Avalue Technology Inc. makes no representation or warranty that such

application will be suitable for the specified use without further testing or modification.

Life Support Policy

Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN

LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL

OF Avalue Technology Inc.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for

surgical implant into body, or (b) support or sustain life and whose failure to perform,

when properly used in accordance with instructions for use provided in the labeling, can

be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to

perform can be reasonably expected to cause the failure of the life support device or

system, or to affect its safety or effectiveness.

A Message to the Customer

Avalue Customer Services

Each and every Avalue’s product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of industrial

environments. Whether your new Avalue device is destined for the laboratory or the factory

floor, you can be assured that your product will provide the reliability and ease of operation

for which the name Avalue has come to be known.

Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To

ensure you get the full benefit of our services, please follow the instructions below carefully.

ECM-5510

4 ECM-5510 User’s Manual

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.avalue.com.tw/

If you still cannot find the answer, gather all the information or questions that apply to your

problem, and with the product close at hand, call your dealer. Our dealers are well trained

and ready to give you the support you need to get the most from your Avalue’s products. In

fact, most problems reported are minor and are able to be easily solved over the phone.

In addition, free technical support is available from Avalue’s engineers every business day.

We are always ready to give advice on application requirements or specific information on

the installation and operation of any of our products. Please do not hesitate to call or e-mail

us.

Headquarters

Avalue Technology Inc.

7F, 228, Lian-cheng Road,

Chung Ho City, Taipei,

Taiwan

Tel : +886-2-8226-2345

Fax : +886-2-8226-2777

http://www.avalue.com.tw

E-mail: [email protected]

Europe Branch Office

Avalue Europe A/S

Nordre Strandvej 13,

3480 Fredensborg,

Denmark

Tel : +45-7025-0310

Fax : +45-4975-5026

http://www.avalue.com.tw

E-mail: [email protected]

China Branch Office

Avalue Technology Shanghai Inc.

Room 909, 9F, Section B, No.900,

Yisan Road, Caohejing Hi-tech Park,

Shanghai 200233, China

Tel : +86-21-5423-4170

Fax : +86-21-5423-4171

http://www.avalue.com.tw

E-mail: [email protected]

US Branch Office

Avalue Technology Inc.

Suite 210, 200 Tornillo Way,

Tinton Falls, NJ 07712

USA

Tel: +1-732-578-0200

Fax: +1-732-578-0250

http://www.avalue.com.tw

E-mail: [email protected]

User’s Manual

ECM-5510 User’s Manual

Product Warranty

Avalue warrants to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Avalue, or which have been subject to

misuse, abuse, accident or improper installation. Avalue assumes no liability under the

terms of this warranty as a consequence of such events. Because of Avalue’s high

quality-control standards and rigorous testing, most of our customers never need to use our

repair service. If any of Avalue’s products is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will be billed according

to the cost of replacement materials, service time, and freight. Please consult your dealer

for more details. If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU type and

speed, Avalue’s products model name, hardware & BIOS revision number, other

hardware and software used, etc.) Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any

helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material authorization)

number from your dealer. This allows us to process your good return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card

and a photocopy proof of purchase date (such as your sales receipt) in a shippable

container. A product returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

ECM-5510

6 ECM-5510 User’s Manual

Contents

1. Getting Started..........................................................................................................10

1.1 Safety Precautions ..................................................................................................10

1.2 Packing List.............................................................................................................10

1.3 Document Amendment History ...............................................................................11

1.4 Manual Objectives...................................................................................................12

1.5 System Specifications .............................................................................................13

1.6 Architecture Overview .............................................................................................15

1.6.1 Block Diagram ................................................................................................................................ 15

1.6.2 AMD Geode GX2 & CS5535..........................................................................................................16

1.6.3 VIA VT1612A Audio Codec............................................................................................................ 18

1.6.4 Ethernet.......................................................................................................................................... 18

1.6.5 Winbond W83627HF-AW LPC Super I/O ...................................................................................... 19

1.6.6 Winbond W83977EF ISA Super I/O............................................................................................... 19

1.6.7 NS DS90C385 LVDS Transmitter .................................................................................................. 20

1.6.8 ITE IT8888F PCI-ISA Bridge.......................................................................................................... 20

2. Hardware Configuration...........................................................................................21

2.1 Product Overview....................................................................................................22

2.2 Installation Procedure .............................................................................................23

2.2.1 Main Memory.................................................................................................................................. 24

2.3 Jumper and Connector List .....................................................................................26

2.4 Setting Jumpers & Connectors ...............................................................................28

2.4.1 BIOS Write Protect Select (JP1) .................................................................................................... 28

2.4.2 TFT/CRT Select (JP2).................................................................................................................... 28

2.4.3 Clear CMOS (JP3) ......................................................................................................................... 29

2.4.4 COM2 RS-232/422/485 Select (JP5, JP6)..................................................................................... 29

2.4.5 COM2/4/3/1 Pin 9 Select (JP7, JP8, JP9, JP10) ........................................................................... 30

2.4.6 LCD Inverter Power Select (JP11) ................................................................................................. 30

2.4.7 Compact Flash Mode Select (JP13) .............................................................................................. 31

2.4.8 DOC Memory Address Select (JP14) ............................................................................................ 31

2.4.9 ATX Power Connector (ATX1) ....................................................................................................... 32

2.4.10 System Fan Connector (CN1).................................................................................................... 33

2.4.11 CPU Fan Connector (CN2) ........................................................................................................ 33

2.4.12 TFT Panel Connector (CN3)...................................................................................................... 34

2.4.13 LVDS Connector (CN4) ............................................................................................................. 36

2.4.14 CD-ROM Audio Input Connector (CN5)..................................................................................... 37

2.4.15 Serial Port 1, 3, 4 Connector (CN6)........................................................................................... 38

User’s Manual

ECM-5510 User’s Manual

2.4.16 Serial Port 2 Connector in RS-232 Mode (CN6, Pin 11-20) ...................................................... 40

2.4.17 Serial Port 2 Connector in RS-422 Mode (CN6, Pin 11-20) ...................................................... 41

2.4.18 Serial Port 2 Connector in RS-485 Mode (CN6, Pin 11-20) ...................................................... 42

2.4.19 PC/104 Connector (CN7 + CN8) ............................................................................................... 43

2.4.20 IrDA Connector (CN10).............................................................................................................. 49

2.4.21 Keyboard & Mouse Connector (CN11) ...................................................................................... 50

2.4.22 USB Connector 0, 1, 2 & 3 (CN12, CN15)................................................................................. 51

2.4.23 LCD Inverter Connector (CN13) ................................................................................................ 52

2.4.24 Primary IDE Connector (CN14) ................................................................................................. 53

2.4.25 Floppy Connector (FLP1)........................................................................................................... 55

2.4.26 Digital I/O Connector (JDIO1).................................................................................................... 57

2.4.27 Front Panel Connector (JFP1)................................................................................................... 58

2.4.28 Audio Connector (JP4)............................................................................................................... 59

2.4.29 LCD Backlight Brightness Adjustment Connector (JP12).......................................................... 60

2.4.30 -5V/-12V PC/104 Voltage Connector (JP15) ............................................................................. 60

2.4.31 Parallel Port Connector (LPT1)..................................................................................................61

2.4.32 Power Connector (PWR1) ......................................................................................................... 62

2.4.33 VGA Connector (VGA1)............................................................................................................. 63

3BIOS Setup................................................................................................................64

3.1 Starting Setup .........................................................................................................65

3.2 Using Setup ............................................................................................................66

3.3 Getting Help ............................................................................................................67

3.4 In Case of Problems................................................................................................67

3.5 Main Menu ..............................................................................................................68

3.5.1 Standard CMOS Features.............................................................................................................. 69

3.5.2 Advanced BIOS Features .............................................................................................................. 71

3.5.3 Advanced Chipset Features........................................................................................................... 75

3.5.4 Integrated Peripherals.................................................................................................................... 77

3.5.5 Power Management Setup............................................................................................................. 79

3.5.6 PnP / PCI Configuration ................................................................................................................. 81

3.5.7 PC Health Status............................................................................................................................ 82

3.5.8 Load Fail-Safe Defaults.................................................................................................................. 83

3.5.9 Load Optimized Defaults................................................................................................................ 83

3.5.10 Set Supervisor / User Password ................................................................................................ 84

3.5.11 Save & Exit Setup ...................................................................................................................... 85

3.5.12 Exit Without Save....................................................................................................................... 86

ECM-5510

8 ECM-5510 User’s Manual

4Drivers Installation ...................................................................................................87

4.1 Install Audio Driver (For AMD GX2) ........................................................................88

4.2 Install Display Driver (For AMD GX2)......................................................................90

4.3 Install Ethernet Driver (For Realtek RTL810x, RTL813x Family) ............................92

5Measurement Drawing .............................................................................................93

Appendix A: BIOS Revisions..........................................................................................95

Appendix B: AWARD BIOS POST Messages ................................................................96

Overview............................................................................................................................97

Post Beep ..........................................................................................................................97

Error Messages .................................................................................................................97

1. CMOS BATTERY HAS FAILED .........................................................................................................97

2. CMOS CHECKSUM ERROR .............................................................................................................97

3. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER ............................................ 97

4. DISKETTE DRIVES OR TYPES MISMATCH ERROR - RUN SETUP.............................................. 97

5. DISPLAY SWITCH IS SET INCORRECTLY...................................................................................... 98

6. DISPLAY TYPE HAS CHANGED SINCE LAST BOOT ..................................................................... 98

7. EISA Configuration Checksum Error PLEASE RUN EISA CONFIGURATION UTILITY................... 98

8. EISA Configuration Is Not Complete PLEASE RUN EISA CONFIGURATION UTILITY ................... 98

9. ERROR ENCOUNTERED INITIALIZING HARD DRIVE.................................................................... 98

10. ERROR INITIALIZING HARD DISK CONTROLLER ..................................................................... 98

11. FLOPPY DISK CNTRLR ERROR OR NO CNTRLR PRESENT ................................................... 98

12. Invalid EISA Configuration PLEASE RUN EISA CONFIGURATION UTILITY .............................. 99

13. KEYBOARD ERROR OR NO KEYBOARD PRESENT ................................................................. 99

14. Memory Address Error at ... ........................................................................................................... 99

15. Memory parity Error at ................................................................................................................... 99

16. MEMORY SIZE HAS CHANGED SINCE LAST BOOT ................................................................. 99

17. Memory Verify Error at ... ............................................................................................................... 99

18. OFFENDING ADDRESS NOT FOUND ......................................................................................... 99

19. OFFENDING SEGMENT: ..............................................................................................................99

20. PRESS A KEY TO REBOOT ....................................................................................................... 100

21. PRESS F1 TO DISABLE NMI, F2 TO REBOOT ......................................................................... 100

22. RAM PARITY ERROR - CHECKING FOR SEGMENT ... ........................................................... 100

23. Should Be Empty But EISA Board Found PLEASE RUN EISA CONFIGURATION UTILITY..... 100

24. Should Have EISA Board But Not Found PLEASE RUN EISA CONFIGURATION UTILITY ..... 100

25. Slot Not Empty ............................................................................................................................. 100

26. SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ... ............................................................... 100

27. Wrong Board In Slot PLEASE RUN EISA CONFIGURATION UTILITY...................................... 101

28. FLOPPY DISK(S) fail (80) →Unable to reset floppy subsystem................................................. 101

29. FLOPPY DISK(S) fail (40) →Floppy Type dismatch................................................................... 101

User’s Manual

ECM-5510 User’s Manual

30. Hard Disk(s) fail (80) →HDD reset failed.................................................................................. 101

31. Hard Disk(s) fail (40) →HDD controller diagnostics failed........................................................ 101

32. Hard Disk(s) fail (20) →HDD initialization error........................................................................ 101

33. Hard Disk(s) fail (10) →Unable to recalibrate fixed disk........................................................... 101

34. Hard Disk(s) fail (08) →Sector Verify failed.............................................................................. 101

35. Keyboard is locked out - Unlock the key. ..................................................................................... 101

36. Keyboard error or no keyboard present. ...................................................................................... 101

37. Manufacturing POST loop............................................................................................................ 101

38. BIOS ROM checksum error - System halted. .............................................................................. 101

39. Memory test fail. ........................................................................................................................... 101

40. POST Codes ................................................................................................................................ 102

ECM-5510

10 ECM-5510 User’s Manual

1. Getting Started

1.1 Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should

open the PC chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

1.2 Packing List

Before you begin installing your single board, please make sure that the

following materials have been shipped:

z1 x ECM-5510 onboard AMD Geode GX466 333 MHz mini module

z1 x Quick Installation Guide for ECM-5510

z1 x CD-ROM or DVD-ROM contains the followings:

—User’s Manual (this manual in PDF file)

—Ethernet driver and utilities

—VGA drivers and utilities

—Audio drivers and utilities

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Avalue Technology Carte mère

Avalue Technology

Avalue Technology ALX800-LCN Manuel utilisateur

Avalue Technology

Avalue Technology SENX-BYT Manuel utilisateur

Avalue Technology

Avalue Technology EMX-Q87R Manuel utilisateur

Avalue Technology

Avalue Technology HPM-SRSUA Manuel utilisateur

Avalue Technology

Avalue Technology ERX-G41 Manuel utilisateur

Avalue Technology

Avalue Technology ECM-QM77 Manuel utilisateur

Avalue Technology

Avalue Technology ACP-PNVDV-A1-DCR Manuel utilisateur

Avalue Technology

Avalue Technology EMX-ADLP-B1 Manuel utilisateur

Avalue Technology

Avalue Technology XTX-PNV Manuel utilisateur

Avalue Technology

Avalue Technology EAX-Q87 Manuel utilisateur

Avalue Technology

Avalue Technology ECM-US15WP Manuel utilisateur

Avalue Technology

Avalue Technology EAX-C246BP Manuel utilisateur

Avalue Technology

Avalue Technology EPI-QM57 Manuel utilisateur

Avalue Technology

Avalue Technology ECM-SKLH Manuel utilisateur

Avalue Technology

Avalue Technology EMX-945GSE-A1-DVIR Manuel utilisateur

Avalue Technology

Avalue Technology EMX-TGLC Manuel utilisateur

Avalue Technology

Avalue Technology ERX-H110KP Manuel utilisateur

Avalue Technology

Avalue Technology ACP-PNVDV-A1-ATXR Manuel utilisateur

Avalue Technology

Avalue Technology ECMG3-Q170 Manuel utilisateur

Avalue Technology

Avalue Technology EMX-SKLUC Manuel utilisateur

Avalue Technology

Avalue Technology EAX-785E Manuel utilisateur

Avalue Technology

Avalue Technology EMX-SKLGP Manuel utilisateur

Avalue Technology

Avalue Technology EMX-BYT3 Manuel utilisateur

Avalue Technology

Avalue Technology EAX-H81P Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur