Avalue Technology ACP-PNVDV-A1-DCR Manuel utilisateur

Part No. E2017PNVD00R

ACP-PNVDV-A1-DCR

Intel ATOM Mini ITX Motherboard

Quick Installation Guide

1st Ed –29 October 2012

ACP-PNVDV-A1-DCR Quick Installation Guide

2 ACP-PNVDV-A1-DCR Quick Installation Guide

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Headquarters and Branch

Avalue USA

Avalue Technology Inc.

7F, 228, Lian-cheng Road, Chung Ho City, Taipei,

Taiwan

Tel:+886-2-8226-2345

Fax: +886-2-8226-2777

Information:sales@avalue.com.tw

Service: service@avalue.com.tw

Avalue Technology Inc.

9 Timber Lane, Marlboro, NJ 07746-1443

Tel: (732) 414-6500

Fax: (732) 414-6501

Information: sales@avalue-usa.com

Service: support@avalue-usa.com

BCM Advanced Research

Avalue Europe

BCM Advanced Research

an Avalue Company

7 Marconi, Irvine, CA92618

Tel: +1-949-470-1888

Fax: +1-949-470-0971

Information: BCMSales@bcmcom.com

Web: www.bcmcom.com

Avalue Europe A/S

Moelledalen 22C, 3140

Aalsgaarde, Denmark

Tel: +45-7025-0310

Fax:+45-4975-5026

Information: sales.e[email protected]

Service: service.europ[email protected]

Avalue China

Avalue Japan

Avalue Technology Inc.

Room 805, Building 9,No.99 Tianzhou Rd.,

Caohejing Development Area,

Xuhui District, Shanghai

Tel: +86-21-5169-3609

Fax:+86-21-5445-3266

Information: sales.chi[email protected]n

Service: service@avalue.com.tw

Avalue Technology Inc.

3F Ishiyama-Bldg, 1-6-1 Taito,

Taito-ku, Tokyo 110-0016 Japan

Tel: +81-3-5807-2321

Fax: +81-3-5807-2322

Information: sales.japa[email protected]

Service: service@avalue.com.tw

ACP-PNVDV-A1-DCR Quick Installation Guide

ACP-PNVDV-A1-DCR Quick Installation Guide 3

Content

1. Getting Started............................................................................................................4

1.1 Safety Precautions .........................................................................................4

1.2 Packing List....................................................................................................4

2. Hardware Configuration.............................................................................................5

2.1 Product Overview...........................................................................................6

2.2 Jumper and Connector List ............................................................................7

2.3 Setting Jumpers & Connectors.......................................................................9

2.3.1 AT/ATX power mode select (JAT/ATX1)..................................................9

2.3.2 Serial port 1 pin9 signal selector (JRI1)....................................................9

2.3.3 Serial port 2 pin9 signal selector (JRI2)..................................................10

2.3.4 CF/IDE Master/SLAVE Selector (JCFMS1)............................................10

2.3.5 SATA Dom power jumper 1 (JSTDP1)...................................................11

2.3.6 SATA Dom power jumper 2 (JSTDP2)...................................................11

2.3.7 Clear CMOS (JRTC1) ............................................................................12

2.3.8 Serial port 2 in RS-422/485 mode (J422_485).......................................12

2.3.9 Serial port connector 2 (JCOM2)............................................................13

2.3.10 General purpose I/O connector (DIO1) ................................................13

2.3.11 Keyboard/Mouse connector (KBMS2)..................................................14

2.3.12 Miscellaneous settings connector (JFTP1)...........................................14

2.3.13 Low Pin Count connector (JLPC1).......................................................15

2.3.14 USB connector 1 (JUSB1)....................................................................15

2.3.15 USB connector 2 (JUSB2)....................................................................16

2.3.16 SPI connector (SPI1)............................................................................16

2.3.17 DC-IN power connector (PWR2)..........................................................17

2.3.18 System Fan connector (SYS_FAN1)....................................................17

2.3.19 Serial ATA power connector 1~2 (SATAP1/2)......................................18

2.3.20 CPU fan connector 1 (CPU_FAN1)......................................................18

2.3.21 Audio connector (JAUD1).....................................................................19

2.3.21.1 Signal Description –Audio connector (JAUD1)................................................. 19

2.3.22 Primary IDE connector (IDE1)..............................................................20

ACP-PNVDV-A1-DCR Quick Installation Guide

4 ACP-PNVDV-A1-DCR Quick Installation Guide

1. Getting Started

1.1 Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should

open the PC chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

1.2 Packing List

Before you begin installing your single board, please make sure that the

following materials have been shipped:

1 x ACP-PNVDV-A1-DCR Intel ATOM Mini ITX Motherboard

1 x Quick Installation Guide for ACP-PNVDV-A1-DCR

1 x DVD-ROM contains the followings:

—User’s Manual (this manual in PDF file)

—Ethernet driver and utilities

—VGA drivers and utilities

—Audio drivers and utilities

1 x Cable set contains the followings:

—1 x Wire SATA Power (15P/1.27-4P/5.08)

—1 x Serial ATA Cable (7P/1.27mm-7P/1.2)

1 x I/O Shield

ACP-PNVDV-A1-DCR Quick Installation Guide

ACP-PNVDV-A1-DCR Quick Installation Guide 5

2.Hardware

Configuration

ACP-PNVDV-A1-DCR Quick Installation Guide

6 ACP-PNVDV-A1-DCR Quick Installation Guide

2.1 Product Overview

ACP-PNVDV-A1-DCR Quick Installation Guide

ACP-PNVDV-A1-DCR Quick Installation Guide 7

2.2 Jumper and Connector List

You can configure your board to match the needs of your application by setting jumpers. A

jumper is the simplest kind of electric switch.

It consists of two metal pins and a small metal clip (often protected by a plastic cover) that

slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.

To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,

2, and 3. In this case, you would connect either two pins.

The jumper settings are schematically depicted in this manual as follows:

A pair of needle-nose pliers may be helpful when working with jumpers.

Connectors on the board are linked to external devices such as hard disk drives, a

keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to

configure your system to suit your application.

If you have any doubts about the best hardware configuration for your application, contact

your local distributor or sales representative before you make any changes.

The following tables list the function of each of the board’s jumpers and connectors.

Jumpers

Label

Function

Note

JRI1

Serial port 1 pin9 signal selector

3 x 2 header, pitch 2.00 mm

JRI2

Serial port 2 pin9 signal selector

3 x 2 header, pitch 2.00 mm

JAT/ATX1

AT/ ATX power mode select

3 x 1 header, pitch 2.00mm

JCFMS1

CF/IDE Master/SLAVE Selector

3 x 1 header, pitch 2.00 mm

JSTDP1~2

SATA Dom power jumper 1~2

3 x 1 header, pitch 2.00 mm

JRTC1

Clear CMOS

3 x 1 header, pitch 2.00 mm

Connectors

Label

Function

Note

BAT1

Battery holder

ACP-PNVDV-A1-DCR Quick Installation Guide

8 ACP-PNVDV-A1-DCR Quick Installation Guide

J422_485

Serial port 2 in RS-422/485 mode

3 x 2 header, pitch 2.54 mm

JCOM2

Serial port connector 2

5 x 2 header, pitch 2.54 mm

DIMM1

204-pin SODIMM DDR3 connector

DIO1

General purpose I/O connector

10 x 2 header, pitch 2.54 mm

IDE1

Primary IDE connector

KBMS2

Keyboard/Mouse connector

4 x 2 header, pitch 2.54mm

JFTP1

Miscellaneous settings connector

5 x 2 header, pitch 2.54mm

JLPC1

Low Pin Count connector

5 x 2 header, pitch 2.00mm

JUSB1

USB connector 1

5 x 2 header, pitch 2.54mm

JUSB2

USB connector 2

5 x 2 header, pitch 2.54mm

SATA1~2

Serial ATA connector 1~2

SPI1

SPI connector

4 x 2 header, pitch 2.54mm

PWR2

DC-IN power connector

2 x 2 wafer, pitch 4.20mm

SYS_FAN1

System Fan connector 1

3 x 1 wafer, pitch 2.54mm

PCIE1

PCI Express connector 1

AUDIO1

Audio connector

JAUD1

Audio connector

5 x 2 header, pitch 2.54mm

ESATA1

ESATA connector 1

LAN_USB1~2

LAN_USB connectors 1~2

VGA_COM1

VGA_COM connector 1

SATAP1~2

Serial ATA power connector 1~2

4 x 1 wafer, pitch 2.54mm

CPU_FAN1

CPU fan connector 1

3 x 1 wafer, pitch 2.54mm

MPCIE1

Mini-PCI connector 1

ACP-PNVDV-A1-DCR Quick Installation Guide

ACP-PNVDV-A1-DCR Quick Installation Guide 9

2.3 Setting Jumpers & Connectors

2.3.1 AT/ATX power mode select (JAT/ATX1)

* Default

ATX*

2.3.2 Serial port 1 pin9 signal selector (JRI1)

* Default

Ring*

+5V

+12V

Signal

PNRI#_A

+12V

PNRI#_A

+5V

PNRI#_A

NRI#_A

ACP-PNVDV-A1-DCR Quick Installation Guide

10 ACP-PNVDV-A1-DCR Quick Installation Guide

2.3.3 Serial port 2 pin9 signal selector (JRI2)

* Default

Ring*

+5V

+12V

Signal

NRI#_B

PNRI#_B

+5V

PNRI#_B

+12V

PNRI#_B

2.3.4 CF/IDE Master/SLAVE Selector (JCFMS1)

* Default

CF-MASTER, IDE-SLAVE*

CF-SLAVE, IDE-MASTER

Signal

IDE_SEL#

GND

CF_SEL#

Table des matières

Autres manuels Avalue Technology Carte mère

Avalue Technology

Avalue Technology EMX-VX11P Manuel utilisateur

Avalue Technology

Avalue Technology EPI-QM87 Manuel utilisateur

Avalue Technology

Avalue Technology EMX-BSWP Manuel utilisateur

Avalue Technology

Avalue Technology EAX-Q67 Manuel utilisateur

Avalue Technology

Avalue Technology SEMX-H81 Manuel utilisateur

Avalue Technology

Avalue Technology EAX-Q170P Manuel utilisateur

Avalue Technology

Avalue Technology EMX-H61 Manuel utilisateur

Avalue Technology

Avalue Technology EBM-LX800 Manuel utilisateur

Avalue Technology

Avalue Technology EMX-SKLUP Manuel utilisateur

Avalue Technology

Avalue Technology ECM-WHL Manuel utilisateur

Avalue Technology

Avalue Technology ACP-IMX6POS-B1 Manuel utilisateur

Avalue Technology

Avalue Technology ESM-BYT2 Manuel utilisateur

Avalue Technology

Avalue Technology EAX-Q77 Manuel utilisateur

Avalue Technology

Avalue Technology ENX-US15WP Manuel utilisateur

Avalue Technology

Avalue Technology EPX-APLP Manuel utilisateur

Avalue Technology

Avalue Technology BBM-BSW A2 Manuel utilisateur

Avalue Technology

Avalue Technology SENX-BYT Manuel utilisateur

Avalue Technology

Avalue Technology ECMG3-Q170 Manuel utilisateur

Avalue Technology

Avalue Technology EPI-QM87R Manuel utilisateur

Avalue Technology

Avalue Technology ECM-QM87R Manuel utilisateur

Avalue Technology

Avalue Technology EMX-C246DP Manuel utilisateur

Avalue Technology

Avalue Technology ECM-US15WP Manuel utilisateur

Avalue Technology

Avalue Technology EMX-H61B series Manuel utilisateur

Avalue Technology

Avalue Technology EPI-QM87 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur