AudioCodes MediaPack MP-272 Manuel utilisateur

2. Cabling

The basic cabling of your gateway is illustrated below:

Use only the supplied 12VDC +/-10%, tolerance, 2A, limited power source wall mount Class II power supply adapter.

Before connecting the gateway to power, ensure that the VAC ratings match, and that you have read the Compliance and

Regulatory Information at www.audiocodes.com/library.

AudioCodes MediaPack™Multimedia Home Gateway

MP-272 Quick Guide

1. Connect the gateway to the Internet by connecting the WAN

Ethernet port, labeled WAN to an external modem, using a CAT

5 Ethernet cable.

2. Connect the Ethernet ports, labeled LAN 1-4 to your LAN

computers, using CAT 5 Ethernet cables.

3. Connect the telephone ports, labeled Phone 1-2 to analog

telephones, using RJ-11 telephone cables.

4. Connect the gateway to a standard 110/220 VAC electrical wall

outlet, using the supplied AC/DC power adapter.

5. When powered on, the gateway's Status LED turns on. When

initialization completes (~ 2 min.), the LED changes from red to

green. If the gateway is off, press the Power button located on

the rear panel to switch it on.

For wall mounting the gateway, refer to the User's

Manual.

Welcome

Thank you for purchasing AudioCodes MediaPack

Multimedia Home Gateway!

This Quick Guide describes installation for AudioCodes

MediaPack 272 model (MP-272).

1. Before Installing

Ensure that the shipped package contains the following items:

MediaPack Multimedia Home Gateway

1 x RJ-45 Ethernet cable

12V AC/DC power adaptor (use only supplied)

If any item is missing, please contact your sales representative.

Notice

Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing

product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can

it accept responsibility for errors or omissions. This document is subject to change without notice. Refer to the current Release

Notes that may be included with your documentation or hardware delivery. Updates to this document as well as software files can

be viewed by registered customers at www.audiocodes.com/downloads.

Date Published: March-05-2013

Document #: LTRT-18625

4. Configuring VoIP Parameters

Before you can make VoIP calls, you need to register with an

Internet Telephony Service Provider (ITSP) and obtain account

and SIP Proxy server information

1. From the menu pane, click Voice Over IP; the ‘Voice

Over IP’ page appears in the right pane.

2. Click the Line Settings tab, mark check boxes of lines

that are connected to telephones (clear those not

connected), and then click Apply.

3. Click the Edit icon corresponding to the telephone

lines, and then in the ‘Line Settings’ page, configure the

parameters with values provided by your ISP.

4. Click the Signaling Protocol tab, and then select the ‘Use

SIP Proxy’ check box. In the ‘Proxy IP Address or Host

Name’ field, enter the ITSP’s proxy server IP address or

host name. Click OK to complete the VoIP configuration.

To verify successful registration with

the proxy

server, ensure that the Phone

LED is lit green or in

the Voice over IP tab (System Monitoring menu), the

entry ‘SIP Registration’ displays “Registered” for the

configured lines.

5. Pick up the phone receiver (or handset) and listen for a

dial tone; you’re now ready to make a VoIP call.

3. Configuring Network Parameters

1. Open a Web browser and then enter the following URL

address to access the gateway's embedded Web server

graphical user interface:

MP-272: http://mp272.home

2. Select the Web GUI display language and click Continue.

3. Define a new login username / password and click OK.

4. In the ‘Quick Setup’ page, select and define the Internet

connection type as instructed by your ITSP, and then

click OK. You are now connected to the Internet and can

proceed to configure VoIP parameters for

making and receiving voice-over-IP calls.

If there is no Internet connection, the Web GUI’s

Map View page (Home) displays a red icon after

the globe icon. Consult your ITSP for valid connection

parameters.

The gateway's default wireless (Wi-Fi) network name

(SSID) comprises product name followed by "_" and

the 6 last characters of the MAC address in capital

letters (secured). For example, if the MAC address is

00:90:8F:2C:64:70 the SSID will be:

MP-272: MP272_2C6470

The password is 0<serial number without first two

characters>. For example, if the SN is VT1234567, the

password will be 01234567. The SN is printed on the

rear of the MP-272.

Autres manuels AudioCodes Porte

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes MP-104 Manuel utilisateur

AudioCodes

AudioCodes Media Pack MP-124 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-124 Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 Manuel utilisateur

AudioCodes

AudioCodes MP-100 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-263-DB Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000B Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000B Instructions de montage

AudioCodes

AudioCodes MediaPack 1288 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-124 Manuel utilisateur

AudioCodes

AudioCodes Mediant 4000 SBC Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 MSBG Mode d’emploi

AudioCodes

AudioCodes Mediapack mp-11x Manuel utilisateur

AudioCodes

AudioCodes Mediant 800C SBC Guide de référence rapide

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 MSBG Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-263-DB Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-11x Series Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 Series Instructions de montage

AudioCodes

AudioCodes Mediant 500Li MSBR Manuel utilisateur

AudioCodes

AudioCodes MP-11 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-124 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur