Atdec AF-AN Manuel utilisateur

AF-AN Page 1 of 3

COMPONENT CHECKLIST

Notebook tray

assembly

(x1)

Hand grip

assembly

(x1)

Rotation

limiter

(x1)

Primary arm

cable cover

(x1)

Secondary arm

cable cover

(x1)

Self adhesive

hook & loop

(x4 sets)

Installation Guide

AF-AN

Notebook Arm

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is designed to be used in conjunction with an external keyboard and mouse.

! This product is compatible with the range of AF poles and arms.

! The manufacturer accepts no responsibility for incorrect installation.

WEIGHT RANGE

0 - 8kg

(0 - 17.6lbs)

AF-AN Page 2 of 3

5mm Allen key

Pole top cap

1. Remove existing arm and monitor from AF pole (Ensure monitor cables are unplugged)

1.1 Remove pole top cap and 5mm

allen key from the Visidec pole

1.2 Quick release the monitor from

arm assembly

1.3 Remove the arm assembly from AF pole

Handgrip

Tab

2. Attach notebook tray onto AF Pole

2.1 Slide the Handgrip onto

the top of the Visidec Pole

so the handgrip tab protrudes

3.2 Lock the monitor arm handgrip in the desired position

3.3 Insert pole top cap into pole.

This is also where the allen key is stored

3.1 Slide the existing arm and monitor onto the visidec pole

3. Re-install the existing arm and monitor

VESA

monitor

head

Arm

assembly

Notebook Tray

& Arm Assembly

2.2

OPTIONAL ROTATION LIMITER

Insert rotation limiter for 180�

rotation around mounting pole

2.3 Slip the notebook tray &

arm assembly over the handgrip

tab and then onto the pole

2.4 Slide the arm assembly

and handgrip down the pole

before locking the Handgrip

at the desired heighta

5mm

Allen key

Pole

top cap

3.4 Insert VESA monitor head into the receptacle

in the arm assembly

AF-AN Page 3 of 3

Lift

4. Install Notebook

4.1 Adjust the support tabs to suit the

width of the notebook computer ensuring

that cable ports are not obstructed

5.1 After plugging in your cables,

install the Cable Covers

4.2 To increase stability, use the self

adhesive Hook-and-Loop Fasteners supplied

• Peel off the backing paper to the fasteners

• Attach fasteners to both the Notebook

Tray and computer

• Ensure that each set of fasteners are

correctly aligned i.e. Hook to Loop

5.3 Cable Clips and Cable Stops can be installed

to further manage cables. Please See Over

Lock Slot

Allen Key

Storage

Loosen

Tighten

Loosen

Tighten

Loosen

Tighten

Loosen

Tighten

Horizontal

Adjustment

±95°

Portrait/Landscape

Rotation

±5°

±25° Tilt

Elbow joint

‘click’

5. Cable Management

6. Adjusting the display bracket

Note: After connecting

the Notebook Cables,

route them through

the Cable Management

Clip on the back of the

Notebook Tray.

Ensure enough cable slack is

given to allow for movement.

Adjust the tilt angle of the

notebook tray as desired,

locking it in position using

the 5mm allen key

TILT (tray angle up/down)

PAN (tray angle left/right)

Insert Cable Covers

up into Lock Slots.

5.2 Push Cable Covers away from

Elbow Joint to secure in place

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

Autres manuels Atdec Support et étagère

Atdec

Atdec SYSTEMA SW6S Manuel utilisateur

Atdec

Atdec TH-1026-VF Manuel utilisateur

Atdec

Atdec AF Series Manuel utilisateur

Atdec

Atdec TH-3060-UFL Manuel utilisateur

Atdec

Atdec AWM-LR Manuel utilisateur

Atdec

Atdec AWM-BT Manuel utilisateur

Atdec

Atdec SPACEDEC ACROBAT Instructions de fonctionnement

Atdec

Atdec Visidec Freestanding Double Manuel utilisateur

Atdec

Atdec Freestanding Quad Manuel utilisateur

Atdec

Atdec Telehook Manuel utilisateur

Atdec

Atdec Visidec Focus Micro Manuel utilisateur

Atdec

Atdec AD-WM-7060 Manuel utilisateur

Atdec

Atdec AWM-W6 Manuel utilisateur

Atdec

Atdec AWM-W35 Manuel utilisateur

Atdec

Atdec TH-1040-CTS Manuel utilisateur

Atdec

Atdec AD-TVAC-CM Manuel utilisateur

Atdec

Atdec A-STSWW-A Manuel utilisateur

Atdec

Atdec VFS-DH Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-FS Manuel utilisateur

Atdec

Atdec AWM-BT Manuel utilisateur

Atdec

Atdec AD-AC-PH Manuel utilisateur

Atdec

Atdec AWM-X40 Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-FS Manuel utilisateur

Atdec

Atdec AWMS-2-D13-C Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur