ASROCK IEPF-9000S-EX4 Manuel utilisateur

iEPF-9000S-EX4

iEPF-9002S-EX4

iEP-9000E

iEP-9002E

User Manual

Version 1.0

Published August 2022

Version 1.0

Published August 2022

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Rack Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished

for informational use only and subject to change without notice, and should not

be constructed as a commitment by ASRock Rack. ASRock Rack assumes no

responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock Rack does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable

for any indirect, special, incidental, or consequential damages (including damages

for loss of prots, loss of business, loss of data, interruption of business and the

like), even if ASRock Rack has been advised of the possibility of such damages

arising from any defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Rack’s Website: www.ASRockRack.com

Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions,

and Notes marked in this manual and on the associated device before handling/

operating the device, to avoid injury or damage.

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Read the Specications section of this manual for detailed information on the

recommended operating environment.

4. Disconnect the equipment from all AC outlets before cleaning. Use only a damp cloth

for cleaning. Do not use liquid or sprayed detergent.

5. Place the equipment on a reliable surface during installation. Dropping or letting the

equipment fall may cause damage.

6. Do not leave the equipment in an environment with a storage temperature of below

-40 °C (-40 °F) or above 85 °C (185 °F) as this may cause damage. e equipment

should be stored in a controlled environment.

7. Ensure that the voltage of the power source is correct before connecting the equipment

to a power outlet.

8. Position the power cord away from high-trac areas. Do not place anything over the

power cord.

9. If the equipment is not used for a long time, disconnect the equipment from the power

source to avoid damage from transient over-voltage.

10. All cautions and warnings on the equipment should be noted.

11. To avoid electrical shock and/or damage to the device:

• Keep the device away from water or liquid sources.

• Keep the device away from high heat or humidity.

• Keep device properly ventilated (do not block or cover ventilation openings).

• Always use designated voltage and power source settings.

• Always install and operate the device near an easily accessible electrical outlet.

• Secure the power cord (do not place any object on/over the power cord).

• Only install/attach and operate the device on stable surfaces and/or designated

mountings.

• e power cord must be connected to a socket or outlet with a ground connection.

12. If one of the following occurs, have the equipment checked by service personnel:

• e power cord or plug is damaged.

• Liquid has penetrated into the equipment.

• e equipment has been exposed to moisture.

• e equipment is malfunctioning or does not operate according to the user manual.

• e equipment has been dropped and damaged.

• e equipment shows obvious signs of breakage.

13. Never attempt to repair the device, which should only be serviced by qualied technical

personnel using suitable tools.

14. Any unveried component may cause unexpected damage. To ensure correct

installation, always use the components (e.g., screws) provided in the accessory box.

15. is equipment is not suitable for use in locations where children are likely to be

present.

16. e equipment should only be installed in a restricted access area.

17. Restricted Access Location:

e device must be installed only in a server room or computer room where access is:

• Access can only be gained by service persons or by users who have been instructed

about the reasons for the restrictions applied to the location and about any precautions

that shall be taken.

• Access is through the use of a tool or lock and key, or other means of security, and is

controlled by the authority responsible for the location.

• Leave enough clearance (25 inches in the front and 30 inches in the back of the rack) to

allow the front door to be opened completely and to allow for sucient airow.

• is product is for installation merely in a Restricted Access Location.

• is product is not suitable for use with visual display workplace devices according to §2

of "the German Ordinance for Work with Visual Display Units".

18. e equipment is intended to be supplied by the external power source (UL listed/ IEC

60950-1/ IEC 62368-1 approved) whose output complies with ES1/SELV. To reduce

potential safety issues, only the AC adapter provided with the product, a replacement

AC adapter provided by ASRock Industrial or agency, or an AC adapter purchased as

an accessory from ASRock Industrial or agency should be used with the product.

19. is power adapter (FSP330-AAAN3) is intended to be supplied based on a UL-

certied and suitable for use at an operating/storage temperature of 0 °C (32 °F)~ 40 °C

(104 °F)/ -20 °C (-4 °F)~80 °C (176 °F), and the current output is rated 13.75A. If you

need further assistance, contact ASRock Industrial for additional information.

20. e ambient temperature of the iEP-9000E series: 70 °C (158°F) max.; the ambient

temperature of the iEPF-9000S series: 75 °C (167°F) max.

21. e terminal block is suitable for V+& V-, 3 units for each (16~18AWG) which means

6 units in total. e torque value is 0.69Nm. And use copper conductors only. Kindly

note that must be installed by a skilled person.

22. LAN port must use shielded LAN cable.

Replaceable Batteries

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE

OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

CAUTION

e equipment is equipped with a battery-powered real-time clock circuit. ere is a risk

of explosion if a battery is incorrectly replaced. Replace only with the same or equivalent

type as designated by the manufacturer. Discard all used batteries according to the

manufacturer's instructions.

LITHIUM-METAL BATTERY WARNING

Danger of explosion if the battery is incorrectly replaced. Replace only with the same or

equivalent type designated by the manufacturer. Dispose of used batteries according to the

manufacturer's instructions.

WARNING

All interconnection to the EUT is for indoor location and therefore PoE network

interconnected to the EUT is considered as ES1/SELV for connected only to PoE network

without routing to the outside plant.

WARNING

Input voltage rated 9~36V, 30~18A

Packing: e unit should be carried with both hands and handled with care.

Maintenance: Use only approved products or a dry applicator to clean and maintain the

surfaces.

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

Contact Information

If you need to contact ASRock Industrial or want to know more about ASRock Industrial,

you’re welcome to visit ASRock Industrial’s website at www.asrockind.com ; or you may

contact your dealer for further information.

ASRock Industrial Incorporation

Email: [email protected]

Contents

Chapter 1 Introduction 1

1.1 Key Features 1

1.2 Package List 3

1.3 Specications 5

1.4 Dimensions 13

1.5 Block Diagram 21

Chapter 2 System Overview 25

2.1 System Front Panel 25

2.1.1 Control Panel Buttons and LED Indicators 27

2.1.2 I/O Connectors 29

2.2 HDD Panel 30

2.3 Drive Tray LEDs 31

Chapter 3 Hardware Installation and Maintenance 32

3.1 How to Install the Hard Disk Drive 33

3.2 How to Install the SIM Card 35

3.3 How to Disassemble the System 37

3.4 How to Install the Desk Mount Bracket 42

3.5 How to Install the Rubber Foot 43

Chapter 4 Motherboard 44

4.1 Motherboard Layout 44

Chapter 5 UEFI Setup Utility 51

5.1 Introduction 51

5.2 Main Screen 52

5.3 Advanced Screen 53

5.3.1 CPU Conguration 54

5.3.2 Chipset Conguration 56

5.3.3 Storage Conguration 58

5.3.4 Super IO Conguration 59

5.3.5 ACPI Conguration 61

5.3.6 USB Conguration 62

5.3.7 Trusted Computing 63

5.4 Hardware Health Event Monitoring Screen 65

5.5 Security Screen 66

5.6 Boot Screen 67

5.7 Exit Screen 68

iEPF-9000S-EX4 / iEPF-9002S-EX4 /

iEP-9000E / iEP-9002E

PB 1

English

Chapter 1 Introduction

ank you for purchasing iEPF-9000S-EX4 / iEPF-9002S-EX4 / iEP-9000E / iEP-9002E,

a reliable barebone system produced under ASRock Industrial’s consistently stringent

quality control. It delivers excellent performance with robust design conforming to

ASRock Industrial’s commitment to quality and endurance.

1.1 Key Features

iEPF-9000S-EX4

• Intel® 10th Gen Xeon® W or Core™ Processors with W480E Chipset

• 4 x 260-pin DDR4 SO-DIMM up to 128GB (32GB per DIMM)

• 1 x PCIe x16 (PCIe Gen3) or 2 x PCIe x8 (PCIe Gen3), 2 x PCIe x4 (PCIe Gen3)

• 1 x M.2 Key M, 1 x M.2 Key B, 1 x M.2 Key E, 2 x Mini PCIe

• 4 x USB 3.2 Gen2x1, 2 x USB 2.0, 6 x COM, 4 x SATA3, 8 x DI, 8 x DO

• 5 x Intel Gigabit LAN (2 support PoE)

• Supports Triple Display, 2 x Displayport, 1 x VGA

• Powerful Edge AI acceleration enabled by the most exible mechanical, thermal, and

power design, with support for 275mm x 111.15 mm (L x H) max. and up to 255W

graphics card

iEPF-9002S-EX4

• Intel®10th Gen Core™ Processors with H420E chipset

• 2 x 260-pin DDR4 SO-DIMM up to 64GB (32GB per DIMM)

• 1 x PCIe x16 (PCIe Gen3), 1 x M.2 Key M, 1 x M.2 Key B, 1 x M.2 Key E,

• 2 x Mini PCIe

• 4 x USB 3.2 Gen1x1, 2 x USB 2.0, 6 x COM, 2 x SATA3, 8 x DI, 8 x DO

• 3 x Intel Gigabit LAN

• Powerful Edge AI acceleration enabled by the most exible mechanical, thermal, and

power design, with support for 275mm x 111.15 mm (L x H) max. and up to 255W

graphics card

Because the hardware specications might be updated, the content of this documentation

will be subject to change without notice. In case any modications of this documentation

occur, the updated version will be available on ASRock Industrial’s website without further

notice. If you require technical support related to this product, please visit our website for

specic information about the model you are using.

ASRock Industrial’s Website: www.ASRockInd.com

e illustrations shown in this manual are examples only. e actual system may dier

depending on the product model you purchsed.

2 3

English

iEP-9000E

• Intel® 10th Gen Xeon® W or Core™ Processors with W480E Chipset

• 4 x 260-pin DDR4 SO-DIMM up to 128GB (32GB per DIMM)

• 1 x M.2 Key M, 1 x M.2 Key B, 1 x M.2 Key E, 2 x Mini PCIe

• 4 x USB 3.2 Gen2x1, 2 x USB 2.0, 6 x COM, 4 x SATA3, 8 x DI, 8 x DO

• 5 x Intel Gigabit LAN (2 support PoE)

• Supports Triple Display, 2 x Displayport, 1 x VGA

iEP-9002E

• Intel®10th Gen Core™ Processors with H420E chipset

• 2 x 260-pin DDR4 SO-DIMM up to 64GB (32GB per DIMM)

• 1 x M.2 Key M, 1 x M.2 Key B, 1 x M.2 Key E, 2 x Mini PCIe

• 4 x USB 3.2 Gen1x1, 2 x USB 2.0, 6 x C OM, 2 x SA TA3, 8 x DI, 8 x DO

• 3 x Intel Gigabit LAN

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ASROCK Matériel informatique

ASROCK

ASROCK iBOX 1300/D4 Series Manuel utilisateur

ASROCK

ASROCK IMB-156 Manuel de service

ASROCK

ASROCK ROMED6U-2L2T Manuel utilisateur

ASROCK

ASROCK USB 3.1/A+C Manuel utilisateur

ASROCK

ASROCK IBOX-230 Manuel utilisateur

ASROCK

ASROCK iBOX-155 Manuel utilisateur

ASROCK

ASROCK Z68 EXTREME4 - ANNEXE 541 Manuel utilisateur

ASROCK

ASROCK STX-1001 Manuel utilisateur

ASROCK

ASROCK NUC BOX-1360P/D5 Manuel utilisateur

ASROCK

ASROCK IMB-X1314 Manuel de service

ASROCK

ASROCK PHANTOM GAMING B760M PG LIGHTNING Manuel utilisateur

ASROCK

ASROCK A620M-HDVP Manuel utilisateur

ASROCK

ASROCK P4VM890 - R2.0 Manuel utilisateur

ASROCK

ASROCK PRO Series Manuel utilisateur

ASROCK

ASROCK IMB-1225 Manuel de service

ASROCK

ASROCK TRX50 WS Mode d’emploi

ASROCK

ASROCK B760 TW/D4 V2 Manuel utilisateur

ASROCK

ASROCK Blazing Quad M.2 Card Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

ASROCK

ASROCK Thunderbolt 4 AIC Manuel utilisateur

ASROCK

ASROCK A620M-HDV/M.2 Manuel utilisateur

ASROCK

ASROCK SBC-250 Manuel de service

ASROCK

ASROCK iBOX 6000 Series Manuel utilisateur

ASROCK

ASROCK iBOX-155 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

ASROCK iEPF-9000S-EX4 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques