Antari S-500 Manuel utilisateur

S-500 Snow Machine

User Manual

English

User Manual

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

․Keep this device dry.

․Always connect to a grounded circuit to avoid risk of electrocution.

․Before connecting machine to power, always check voltage indicate on machine match

to your local AC voltage. Do not use the machine if AC power voltage does not match.

․Disconnect the machine from AC power before servicing and when not in use.

․This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,

immediately unplug the machine and contact your local Antari dealer for advice.

․No user serviceable and modifiable parts inside. Never try to repair this product,

unauthorized technician may lead machine to damage or malfunction.

․For adult use only. Never leave the machine running unattended.

․Installed in well ventilated area. Provide at least 50 cm space around the machine.

․Never add flammable liquid of any kind to the machine.

․Make sure there are no flammable materials close to the machine while operating.

․Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

․If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advise.

․Before transporting the machine, make sure the fluid tank is completely drained.

․Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retrain the

packing material for inspection.

What is included: 1 x S-500 Snow Machine

1 x Power Cord

1 x User Manual

1 x Fluid Tank Feed Tube

1 x 20 Liter Fluid Tank

1 x 10 Meter (32 ft) Hose

1 x Nozzle

Product Dimension

551 mm

651 mm

592 mm

Product Overview

S-500 Control Panel

Nozzle

Tank Capacity：20 liters (5.2 gallon)

XLR 5-Pin DMX Connector

XLR 3-Pin DMX Connector

Neutrik PowerCon

SC-3 Wireless Remote (Optional)

Breaker

Main Power Switch

Wireless Remote Antenna (Optional)

Control Panel

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with ANTARI SL-5A Premium Water Based Snow Fluid

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine, press the [VOLUME]/[DOWN] button on the control panel to

start making snow.

Step 5: To turn off the machine, press the [STOP] button and put the power switch to the

OFF position.

Operation

Control Panel Operation

The machine can be operated with onboard digital control interface

SKU# PM-1 Pan Motor (Optional)

Button

Function

[MENU]

Scroll through setting menu

[UP]/[TIMER]

Up/Activate Timer function

[DOWN]/[VOLUME]

Down/Activate Volume function

[STOP]

Deactivate Timer/Volume function, Escape from menu

Control Menu

Set interval time at timer mode from 15 to 360 sec

Set duration time at timer mode from 5 to 120 sec

Set output volume at timer mode from 1 to 100%

Set output volume at volume mode from 1 to 100%

Set fan speed from 20 to 100%

Set DMX/W-DMX address from 1 to 511

Timer Interval

XXX Sec

Timer Duration

XXX Sec

Timer Output

XXX %

Volume Output

XXX %

Fan Speed

XXX %

DMX-512

Address: XXX

Antari S-500

Ready to Snow

Turn On/Off W-DMX function

Unlink from W-DMX transmitter

Turn On/Off wireless remote

Pair/Unpair with wireless remote.

*This menu will not be shown when Wireless is turn Off.

Turn On/Off run last setting function

DMX Connector Pin Assignment

The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below indicate

pin assignment information

Function

Ground

Data-

Data+

DMX Operation

Making the DMX Connection – Connect machine to a DMX controller or to one of the

machines in the DMX chain. The machine uses an 3-pin XLR connector for DMX connection,

W-DMX Power

W-DMX Reset

Wireless Register

Up:Pair Down:Del

Run Last Setting

Wireless

the connector is located on the rear of the machine.

Address Setup – Use control menu to set DMX address. The machine occupies 2 control

channels. The starting address is defined as the first channel from which the machine will

respond to the controller. Always double check to make sure there are no overlapping

channels in order to control the machine correctly

DMX Channel Function

Channel 1

DMX Value Range

Function

Snow Output Level

0 – 5

Snow off

6 – 255

Snow Output 1 – 100%

Channel 2

DMX Value Range

Function

Fan Output Level

0 – 5

Fan 20%

6 – 255

Fan 21 – 100%

Wireless Remote Operation (Optional)

Wireless remote control system WTR-20 consist of a transmitter equipped with two buttons to

activate, deactivate and adjust output level; with an onboard receiver attach to the front

panel of S-500 snow machine.

SKU# WTR-20 Wireless Kit

Button

Function

[A]

Activate output

[B]

Deactivate output

[C]

Increase output level

[D]

Decrease output level

In a free open space the effective distance is 50 meters, actual usage depending on

obstacle level the effective distance is 10-25 meteres.

Registering a transmitter

Transmitter can be pair or deleted from the receiver. Each receiver can pair up to 10

transmitters. Follow below diagram to pair or delete transmitter.

IMPORTANT NOTE: Wireless register menu will only be shown when Wireless is turn ON

Transmmiter battery replacement

If effective distance seems to be decreased, it is possible the battery level are low and

require replacement. In order to replace the battery, undo the three screws on the back of

transmitter to release the cover. Replace with same type and specification of battery which is

27A 12V.

Wired Remote Operation SKU# SC-3 (Optional)

Wire remote control module SC-3 enable to control the machine from a remote location.

With three push button and two rotary knob to activate/deactivate, priming and output level

adjustment.

Autres manuels pour S-500

Table des matières

Autres manuels Antari Machine à brouillard

Antari

Antari FT-20 Manuel utilisateur

Antari

Antari M-1 Manuel utilisateur

Antari

Antari FT-200 Manuel utilisateur

Antari

Antari Z-380 Manuel utilisateur

Antari

Antari HZ-100 Manuel utilisateur

Antari

Antari CINEMA HAZE CH-1 Manuel utilisateur

Antari

Antari B-100 Manuel utilisateur

Antari

Antari F-5 Fazer Manuel utilisateur

Antari

Antari F-80Z Guide de dépannage

Antari

Antari M-7 RGBA Manuel utilisateur

Antari

Antari F-450 Manuel utilisateur

Antari

Antari B-100 Manuel utilisateur

Antari

Antari FT-50 Manuel utilisateur

Antari

Antari Z-3000II Manuel utilisateur

Antari

Antari M-11 Manuel utilisateur

Antari

Antari II Series Manuel utilisateur

Antari

Antari Fazer Z-300 Manuel utilisateur

Antari

Antari Z-1020 Manuel utilisateur

Antari

Antari Z-80 Manuel utilisateur

Antari

Antari Fog cooler DNG-100 Manuel utilisateur

Antari

Antari M-1 Manuel utilisateur

Antari

Antari S-120 Manuel utilisateur

Antari

Antari ICE-101 Manuel utilisateur

Antari

Antari W-715 Manuel utilisateur

Manuels Machine à brouillard populaires d'autres marques

Boost

Boost BOOST-FOG400LED-BK Manuel utilisateur

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuel utilisateur

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuel utilisateur

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur

Sparklyn

Sparklyn Y846 Manuel utilisateur

Magicfx

Magicfx CO2 Gun Manuel utilisateur

Ibiza

Ibiza LSM500LAS Manuel utilisateur

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuel utilisateur

High End

High End F-100 Manuel utilisateur

Chauvet

Chauvet ARENA 2100 FLEX Manuel utilisateur

Beamz

Beamz F1600 Manuel utilisateur

Sagitter

Sagitter SG ARS900C Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-STF-480 Manuel utilisateur

Orion

Orion OT-U250PP Mode d’emploi

Beamz

Beamz S2500 Manuel utilisateur

American DJ

American DJ Dyno-Fog II Manuel utilisateur

JB Systems

JB Systems FX 1700 Manuel utilisateur