Antari M-7X Manuel utilisateur

M-7X

Stage Fog Machine

User Manual

English ‧ 中文

Note: This is an exploded diagram of 120V machine, For 220-240V, please contact your local Antari dealer or us.

User Manual

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

Keep this device dry.

Always connect to a grounded circuit to avoid risk of electrocution.

Before connecting the machine to power, always check the voltaged indicate on the

machine matches to your local AC voltage. Do not use the machine if AC power

voltage does not match.

Disconnect the machine from AC power before servicing and when not in use.

If the supply cord is damaged, contact your local Antari dealer for replacement.

This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic

parts, immediately unplug the machine and contact your local Antari dealer for advice.

No user serviceable and modifiable parts inside. Never try to repair this product, an

unauthorized technician may lead the machine to damage or malfunction.

For adult use only. Children being supervised not to play with the machine. Never

leave the machine running unattended.

The machine is not to be used by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge.

Installed in a well ventilated area. Provide at least 50 cm space around the machine.

Never add flammable liquid of any kind to the machine.

Make sure there are no flammable materials close to the machine while operating.

Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for .

Before transporting the machine, make sure the fluid tank is completely drained.

Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retain the

packing material for inspection.

What is included: 1 x M-7X Fogger

1 x W-2 Wireless Remote

1 x Power Cord

1 x User Manual

Product Dimension

W 193 mm

H 385.7 mm

L 345 mm

Product Overview

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitably rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatley 5

mintues. Once the machine has reached operating temperature, the LCD display will show

“Ready To Fog”. Now the machine is ready for operation.

Step 5: To start making fog, locate the Volume button on the control panel, and press the

button to start making fog.

Step 6: To turn off the machine, press STOP button and turn Powercon to the OFF

position.

22 x 3W LED

(5R, 6G, 6B, 5A)

Neutrik True 1 Connector

LCD Control Panel

Wireless Reciver

XLR 3-Pin DMX Connector

XLR 5-Pin DMX Connector

Breaker

Operation

Control Panel Operation

The machine can be operated with an onboard digital control interface

Button

Function

[MENU]

Scroll through setting menu

▲[UP]/[TIMER]

Up/Activate Timer function

▼[DOWN]/[VOLUME]

Down/Activate Volume function

[STOP]

Deactivate Timer/Volume function/Return to Standby

Control Menu

Set DMX address from 1 to 504

Set machine as Master of Slave unit

Turn built-in LED color mode On or Off

Set LED output color from macro 1 to 10

DMX512

Address: 1

Stand Alone

Set Master/Slave

Color Mode

On/Off

Color Mode

Marco:01-10

ANTARI M-7X

Ready to Fog

Set LED chase from 1 to 15

Set interval from 15 to 360 seconds

Set duration from 1 to 5 seconds

Turn On or Off W-2 wireless control function

Set wireless remote button function macro color 1 to 10 or chase

1 to 15 and off.

Set wireless remote button function macro color 1 to 10 or chase

1 to 15 and off.

Set wireless remote button function macro color 1 to 10 or chase

1 to 15 and off.

Set wireless remote button function macro color 1 to 10 or chase

1 to 15 and off.

Setting for LED to turn on with fog only or always on.

Set LED delay time before off from 0.3-0.5 or 0-5 seconds.

Color Mode

Chase:01-15

Timer

Interval 15 Sec

Timer

Duration 01-05 Sec

Wireless Setting

Button A:M01/Off

Wireless Setting

Button B:M01/Off

Wireless Setting

Button C:M01/Off

Wireless Setting

Button D:M01/Off

LED Setting

Fog Only/Always On

LED Fade Out

Delay: 0 Sec

Turn On/Off run last setting function

Turn On/Off 2-7 Sec Jet Mode; Jet output can be set between 2-

7 seconds

Turn On/Off W-DMX

Rest W-DMX connection

Wireless Operation

Wireless remote control system W-2 consist of a transmitter equipped with four buttons to

activate four user configurable LED setting and fog; with an onboard receiver attach to the

rear panel of M-7X.

W-2 Wireless Transmitter

Run Last Setting

On/Off

W-DMX512

On/Off

W-DMX Reset

Yes

2-7 Sec Jet Mode

Off/2-7s

Wireless Receiver

Wireless settings are configurable through onboard control panel, refer to control menu

section to setup each buttons.

In an open unobstructed space the effective distance is 50 meters, the effective distance

depending on obstacle level is 10-25 meters.

Registering transmitter

The transmitter can be paired or deleted from the receiver. Each receiver can pair up to 10

transmitters. Follow the steps below to pair or delete a transmitter from the receiver.

Step 1: Power off M-7X Fogger

Step 2: Press and hold [DOWN] button

Step 3: Turn power on and release [DOWN] button when LCD display blinks

Step 4: Follow the menu instruction to pair or delete transmitter

Transmitter battery replacement

If the effective distance appears to be decreased, it is possible the battery level is low and

require replacement. In order to replace the battery, undo the three screws on the back of

transmitter to release the cover. Replace with the same type and specification of battery

which is 27A 12V

DMX Connector Pin Assignment

The machine provides 3 or 5 pin XLR connector for DMX connection. The diagram below

indicates pin assignment information.

Function

Ground

Data-

Data+

N/A

DMX Channel Function

Channel 1

DMX Value Range

Function

Fog

0 –4

5 –255

Fog Off

Fog On (lasts for 20s)

Channel 2

DMX Value Range

Function

Red LED

0-255

0-100%

Channel 3

DMX Value Range

Function

Green LED

0-255

0-100%

Channel 4

DMX Value Range

Function

Blue LED

0-255

0-100%

Channel 5

DMX Value Range

Function

Amber LED

0-255

0-100%

Channel 6

DMX Value Range

Function

Chase

1-15

16-31

32-47

48-63

64-79

80-95

96-111

Chase 1

Chase 2

Chase 3

Chase 4

Chase 5

Chase 6

Chase 7

Table des matières

Autres manuels Antari Machine à brouillard

Antari

Antari Z-800 III Manuel utilisateur

Antari

Antari M-1 Manuel utilisateur

Antari

Antari F-4D Fazer Manuel utilisateur

Antari

Antari FT-20 Manuel utilisateur

Antari

Antari SW-250 Manuel utilisateur

Antari

Antari F-4 Fazer Manuel utilisateur

Antari

Antari F-80ZY Manuel utilisateur

Antari

Antari Z Series Manuel utilisateur

Antari

Antari II Series Manuel utilisateur

Antari

Antari B-100 Manuel utilisateur

Antari

Antari W-508 Manuel utilisateur

Antari

Antari DNG-200 Manuel utilisateur

Antari

Antari W-508 Manuel utilisateur

Antari

Antari IP-1600 Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari F-3 Fazer Manuel utilisateur

Antari

Antari LCU-1 Manuel utilisateur

Antari

Antari Z-80 Manuel utilisateur

Antari

Antari B-100 Manuel utilisateur

Antari

Antari X-510PRO Manuel utilisateur

Antari

Antari Ip-1000 Manuel utilisateur

Antari

Antari HZ-500 Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari F-80Z Guide de dépannage

Manuels Machine à brouillard populaires d'autres marques

Boost

Boost BOOST-FOG400LED-BK Manuel utilisateur

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuel utilisateur

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuel utilisateur

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur

Sparklyn

Sparklyn Y846 Manuel utilisateur

Magicfx

Magicfx CO2 Gun Manuel utilisateur

Ibiza

Ibiza LSM500LAS Manuel utilisateur

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuel utilisateur

High End

High End F-100 Manuel utilisateur

Chauvet

Chauvet ARENA 2100 FLEX Manuel utilisateur

Beamz

Beamz F1600 Manuel utilisateur

Sagitter

Sagitter SG ARS900C Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-STF-480 Manuel utilisateur

Orion

Orion OT-U250PP Mode d’emploi

Beamz

Beamz S2500 Manuel utilisateur

American DJ

American DJ Dyno-Fog II Manuel utilisateur

JB Systems

JB Systems FX 1700 Manuel utilisateur